{"title":"Silverado","description":"","products":[{"product_id":"ls-xtra-clearance-race-gold-anodized-billet-valve-covers","title":"LS Xtra Clearance Race Gold Anodized Billet Valve Covers","description":"\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\"\u003eTall LS Race Billet Valve Covers w\/ Motion Quick Release Breathers 10-171GLD\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis valve cover was built out of desire from the market.  A bare bones billet valve cover with Burn Down breathers and no other ports or oil caps. While this valve cover utilizes burn down breathers with 12, 16, and 1.250\" hose connection, we do now include baffles for the underside of this burndown to reduce oil into PCV system\/burndown box.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: these were built with extra clearance, but are not guaranteed to work with every LS cylinder head and valvetrain on the market. Please do due diligence with measuring before purchasing, once a valve cover is installed we will not return.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese measure \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1.56\u003c\/span\u003e\" (Figure 1) from the mounting surface to the inside of the top of the valve cover, and the gasket adds an additional .050 to .100 for an overall clearance over 1.60\".  Additionally, the reinforcement points for the valve cover bolts measure \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e0.375\u003c\/span\u003e\" tall inside the valve cover. Please measure your clearance before ordering to insure fitment. See picture below (Figure 2) for reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-17003_4_Tall_LS_Race_Valve_Cover_Driver_MARKETING_Drawing.png?v=1736954830\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFigure 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Photoroom_20250115_101834.jpg?v=1736955205\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFigure 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Billet LS Valve Cover Instructions 10-120\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003eBurn Down Breather Fittings (Choose size in options)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGold Anodized Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eComes with Motion Raceworks Billet Quick Release Burn Down Breathers (choose fitting size below)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKnown\/Confirmed fitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMast Cylinder Head with T\u0026amp;D Shaft Rocker Arms\u003c\/li\u003e\n\u003cli\u003eBrodix BR7 with Crower Shaft Rockers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to utilizing large burn down breathers, these covers do not come with any coil pack mounting provisions and will require remote mounting of the coils.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOil Fill\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to provide maximum valve train clearance versus valve cover size, these do not have any oil cap provisions and will require removing covers or filling through burndown ports, or dry sump oil tank fill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are designed to work with a common 2 bolt style \"burn down\" breather fittings as supplied. Breathers can be changed to point either forward or backwards and use an Oring seal to seal against valve cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"32-130BLK  -12AN (32-13006)","offer_id":45182402396213,"sku":"10-171GLD-4","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130BLK -16AN (32-13003)","offer_id":45182402428981,"sku":"10-171GLD-5","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130BLK -1.250\" Hose (32-13004)","offer_id":45182402461749,"sku":"10-171GLD-6","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130 CLEAR  -12AN (32-13006)","offer_id":45182402494517,"sku":"10-171GLD-1","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130 CLEAR -16AN (32-13003)","offer_id":45182402527285,"sku":"10-171GLD-2","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130 CLEAR -1.250\" Hose (32-13004)","offer_id":45182402560053,"sku":"10-171GLD-3","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_8056.jpg?v=1777398831"},{"product_id":"ls-xtra-clearance-race-bare-billet-valve-covers","title":"LS Xtra Clearance Race Bare Billet Valve Covers","description":"\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\"\u003eTall LS Race Bare Billet Valve Covers w\/ Motion Quick Release Breathers 10-171\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis valve cover was built out of desire from the market.  A bare bones billet valve cover with Burn Down breathers and no other ports or oil caps. While this valve cover utilizes burn down breathers with 12, 16, and 1.250\" hose connection, we do now include baffles for the underside of this burndown to reduce oil into PCV system\/burndown box.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: these were built with extra clearance, but are not guaranteed to work with every LS cylinder head and valvetrain on the market. Please do due diligence with measuring before purchasing, once a valve cover is installed we will not return.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese measure \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1.56\u003c\/span\u003e\" (Figure 1) from the mounting surface to the inside of the top of the valve cover, and the gasket adds an additional .050 to .100 for an overall clearance over 1.60\".  Additionally, the reinforcement points for the valve cover bolts measure \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e0.375\u003c\/span\u003e\" tall inside the valve cover. Please measure your clearance before ordering to insure fitment. See picture below (Figure 2) for reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-17003_4_Tall_LS_Race_Valve_Cover_Driver_MARKETING_Drawing.png?v=1736954830\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFigure 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Photoroom_20250115_101834.jpg?v=1736955205\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFigure 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Billet LS Valve Cover Instructions 10-120\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003eBurn Down Breather Fittings (Choose size in options)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBare Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eComes with Motion Raceworks Billet Quick Release Burn Down Breathers (choose fitting size below)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKnown\/Confirmed fitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMast Cylinder Head with T\u0026amp;D Shaft Rocker Arms\u003c\/li\u003e\n\u003cli\u003eBrodix BR7 with Crower Shaft Rockers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to utilizing large burn down breathers, these covers do not come with any coil pack mounting provisions and will require remote mounting of the coils.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOil Fill\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to provide maximum valve train clearance versus valve cover size, these do not have any oil cap provisions and will require removing covers or filling through burndown ports, or dry sump oil tank fill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are designed to work with a common 2 bolt style \"burn down\" breather fittings as supplied. Breathers can be changed to point either forward or backwards and use an Oring seal to seal against valve cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"32-130  -12AN (32-13006)","offer_id":45182405312565,"sku":"10-171-1","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130 -16AN (32-13003)","offer_id":45182405345333,"sku":"10-171-2","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130 -1.250\" Hose (32-13004)","offer_id":45182405378101,"sku":"10-171-3","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_8042.jpg?v=1777398869"},{"product_id":"motion-raceworks-clear-anodized-billet-ls-valve-covers-10-120bm","title":"Motion Raceworks Bare Billet LS Valve Covers","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks Bare Billet LS Valve Covers 10-120BM \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNote: These valve covers are bare aluminum as machined. This allows you to polish or powdercoat the valve cover to suit your needs or leave bare. Finish is not guaranteed as these are as machined.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMotion Raceworks seeks to innovate their way into simplifying builds while focusing on aesthetics and overall function! These billet LS1 valve covers are a showcase and a prime example of this.   \u003c\/p\u003e\n\u003cp\u003eThe result is a valve cover that is something that can be used for a HUGE variety of builds without sacrificing looks or function. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e \u003ca title=\"Billet LS Valve Cover Instructions 10-120\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003e(1) Billet Oil Cap (16 ORB)\u003c\/li\u003e\n\u003cli\u003e(2) Breather Fittings (Choose 10AN or 12AN in options)\u003c\/li\u003e\n\u003cli\u003ePre-Installed Baffles\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOptional:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd LS1 Multi Fit Coil Brackets 10-12007: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd D585 Coil Brackets 10-12008: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd Smart Coil (IGN1A) Brackets 10-12009 (Also Fits MSD\/Fueltech CDI Coils): See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInnovative Coil Mounting Design Adapts Nearly Every Style Coil without sacrificing looks when not running coil packs.  \u003c\/li\u003e\n\u003cli\u003eValve Cover able to be removed without unbolting coil packs\u003c\/li\u003e\n\u003cli\u003eBaffled -12ORB Breathers adaptable to 10AN and 12AN\u003c\/li\u003e\n\u003cli\u003eBillet Oil Cap (-16 ORB)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eCoil-pack mounting able to be changed at later time with A la Carte Coil Pack brackets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA variety of factors go into keeping coil packs on the valve cover including looks, serviceability, coil choice, clearance for fittings, header design, and more.  Whether you choose to run coils or not, this cover is perfect for you.  Featuring a top rail mounting design, if you do not wish to run coils, there are no leftover mounting bosses or holes that are unsightly or in plain view.  If you decide to run coil packs, every LS coil made as well as aftermarket coils such as Smart Coils (IGN1A), CDI can be used.  We thought of everything. To add the brackets, you simply choose the bracket options in the listing or add ala carte at a later time.  \u003c\/p\u003e\n\u003cp\u003eEvery coil bracket is adjustable and clears not only the breather fittings, but also allows for a large billet oil cap. Finally valve cover hardware to remove valve cover is accessible and usable with coils on the car.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, coil packs have been checked and will clear intakes, fuel rails, and even wide hanging superchargers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt Motion Raceworks we understand PCV and crank case pressure is unavoidable.  We also believe that filling catch cans up with oil due to poor breather design is not acceptable.  This valve cover features a long high flow breather channel which will remove excess crank case pressure, and is serviceable by removing C-Clips. Our cover was machined on the top side to receive one of our custom low profile -12 ORB fittings.  This means you can adapt to 10AN or 12AN. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Custom fittings were designed and made to allow for packaging and clearance of internal baffling, standard -12ORB fittings will not work.  Fittings Included, but also sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCoil-Pack Identifier and Links\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eD585: Heat Sink Truck Style\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\"\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003ehttps:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Fit Brackets: LS3 L92 LS1 (F-Body) LQ4, Gen V LT\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\"\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003ehttps:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSmart Coil IGN1A \/ CDI\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\"\u003ehttps:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Rocker Clearance: Does clear factory rocker arms, as well as TSP Roller Tip Rocker arms.  Not known to clear most aftermarket Roller Rockers.***  Does not clear shaft mounted rockers \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg data-mce-fragment=\"1\" alt=\"LS Billet Valve Cover Dimensions\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\"\u003e\u003cbr\u003e\u003cbr\u003ePlease use dimensions to verify fitment on your project\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"10AN (34-11012 (x2)) \/ None","offer_id":45182408687669,"sku":"10-120BM-1","price":599.99,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182408720437,"sku":"10-120BM-2","price":708.0,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182408753205,"sku":"10-120BM-3","price":708.0,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182408785973,"sku":"10-120BM-4","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ None","offer_id":45182408818741,"sku":"10-120BM-5","price":599.99,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182408851509,"sku":"10-120BM-6","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182408884277,"sku":"10-120BM-7","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182408917045,"sku":"10-120BM-8","price":708.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_8038.jpg?v=1777398901"},{"product_id":"tall-ls-race-black-anodized-billet-valve-covers-w-motion-quick-release-breathers-10-171blk","title":"LS Xtra Clearance Race Black Anodized Billet Valve Covers","description":"\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\"\u003eTall LS Race Black Anodized Billet Valve Covers w\/ Motion Quick Release Breathers 10-171BLK\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis valve cover was built out of desire from the market.  A bare bones billet valve cover with Burn Down breathers and no other ports or oil caps. While this valve cover utilizes burn down breathers with 12, 16, and 1.250\" hose connection, we do now include baffles for the underside of this burndown to reduce oil into PCV system\/burndown box.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: these were built with extra clearance, but are not guaranteed to work with every LS cylinder head and valvetrain on the market. Please do due diligence with measuring before purchasing, once a valve cover is installed we will not return.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese measure \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1.56\u003c\/span\u003e\" (Figure 1) from the mounting surface to the inside of the top of the valve cover, and the gasket adds an additional .050 to .100 for an overall clearance over 1.60\".  Additionally, the reinforcement points for the valve cover bolts measure \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e0.375\u003c\/span\u003e\" tall inside the valve cover. Please measure your clearance before ordering to insure fitment. See picture below (Figure 2) for reference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-17003_4_Tall_LS_Race_Valve_Cover_Driver_MARKETING_Drawing.png?v=1736954830\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFigure 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Photoroom_20250115_101834.jpg?v=1736955205\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFigure 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Billet LS Valve Cover Instructions 10-120\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003eBurn Down Breather Fittings (Choose size in options)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBright Black Anodized Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eComes with Motion Raceworks Billet Quick Release Burn Down Breathers (choose fitting size below)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKnown\/Confirmed fitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMast Cylinder Head with T\u0026amp;D Shaft Rocker Arms\u003c\/li\u003e\n\u003cli\u003eBrodix BR7 with Crower Shaft Rockers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to utilizing large burn down breathers, these covers do not come with any coil pack mounting provisions and will require remote mounting of the coils.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOil Fill\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to provide maximum valve train clearance versus valve cover size, these do not have any oil cap provisions and will require removing covers or filling through burndown ports, or dry sump oil tank fill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are designed to work with a common 2 bolt style \"burn down\" breather fittings as supplied. Breathers can be changed to point either forward or backwards and use an Oring seal to seal against valve cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"32-130BLK  -12AN (32-13006)","offer_id":45182428119093,"sku":"10-171BLK-1","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130BLK  -16AN (32-13003)","offer_id":45182428151861,"sku":"10-171BLK-2","price":899.0,"currency_code":"USD","in_stock":true},{"title":"32-130BLK  -1.250\" Hose (32-13004)","offer_id":45182428184629,"sku":"10-171BLK-3","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_8048.jpg?v=1777399068"},{"product_id":"12an-push-in-fitting-for-factory-gm-ls-valve-cover-grommet","title":"12AN Push in Fitting for Factory GM LS Valve cover grommet","description":"\u003ch3\u003e12AN Push in Fitting for Factory GM LS Valve cover grommet Motion Raceworks\u003c\/h3\u003e\n\u003cp\u003eThis billet aluminum fitting presses into the driver side rear valve cover grommet on Gen 3 and 4 LS engines to adapt to 12AN for easy connection of PCV systems. \u003c\/p\u003e\n\u003cp\u003eMade in the USA\u003c\/p\u003e\n\u003cp\u003eIncludes grommet for use if not using in intended valve cover use\u003c\/p\u003e\n\u003c!----\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182428414005,"sku":"34-012LS","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_0979.jpg?v=1777399071"},{"product_id":"99-18-silverado-2wd-4wd-xs3-front-extreme-street-brake-kit-5-lug","title":"99-18 Silverado 2WD\/4WD XS3 Front Extreme Street Brake Kit 5 lug","description":"\u003ch3\u003e\u003cstrong\u003e99-18 Silverado 2WD\/4WD XS3 Front Extreme Street Performance 12.19\" Brake Kit 5 Lug (5x5 \u0026amp; 5x4.75) - Reusing Factory Hubs 012-0291\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNote: This Kit use 1\/2 wheel studs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan\u003eNote: This kit is designed to work with factory hubs which are modified and redrilled for 5x4.75\" OR 5x5\" lug pattern\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1999-2018_Chevy_Silverado_Front_XS3_-_012-0290.pdf?v=1726518472\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eClick Here\u003c\/span\u003e\u003c\/a\u003e\u003c\/b\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBrake Lines: \u003c\/strong\u003e\u003cstrong\u003e99-06 \u003ca href=\"https:\/\/tbmbrakes.com\/products\/99-06-silverado-sierra-front-brake-line-kit-for-tbm-brakes\"\u003eClick Here\u003c\/a\u003e \/ 07-19 \u0026amp; 21-24 \u003ca href=\"https:\/\/tbmbrakes.com\/products\/21-24-silverado-front-brake-line-kit-for-tbm-brakes\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eFactory brake weight (both sides): 85lbs\u003c\/p\u003e\n\u003cp\u003eXS3 Brake weight (both sides): 34lbs\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThis kit saves over 51lbs total over factory brakes!\u003c\/strong\u003e\u003c\/em\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eBuilt with over 30 years of heritage in racing, TBM Brakes introduces its first purpose built street performance brake kit, the XS3 series featuring a 12.19\" vented rotor. Designed to be the bridge between our lightweight single thickness steel racing brakes and the large diameter rotor street performance brakes commonly seen in late model vehicles while providing incredible stopping power.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis brake kit was specifically designed to give the ability to run smaller diameter \/ factory size wheels without sacrificing braking potential. We even found this kit able to work with many steel factory 15\" wheels as well as drag racing wheels. \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eBillet caliper housings machined from solid 6061 Aluminum Alloy\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eCrossflow caliper design eliminates external tubes, and promotes equal pressure to piston distribution \u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e(4) 1.75\" OD pistons per caliper deliver exceptional stopping power and pedal feedback\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eBillet CNC Machined 304 Stainless Steel Pistons\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eTwo Part Durable Powdercoated Calipers (choose color in options)\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eBlack Anodized Brackets, Hats\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eDark Zinc Plated rotors offer corrosion resistance before and after installation (please note rotor color can vary due to process)\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eUnique Cross flow fluid design for smoother operation\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e12 point hardware\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eRace derived caliper design provides excellent stopping and better pedal feel\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eMade in the USA in our Bradenton, FL location!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(1) 12.19\" vented rotors 3-12198108778-1\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(1) 12.19\" vented rotors 3-12198108778-2\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(2) Billet Aluminum brake hat 205-0008-5\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(2) XS3 4 Piston Caliper (Choose color below)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(2) Caliper Bracket 17-0079\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eComplete Set of Pads \u003c\/b\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/sx3-replacement-brake-pads-6-0002hps\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003e6-0002HPS\u003c\/b\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eHardware Kit 011-0338\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThis kit fits the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1998-2018 Silverado 2WD\/4WD\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1998-2018 Sierra 2WD\/4WD\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eInnovative caliper with class leading stopping power!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe XS3 Extreme Street caliper is an innovative new design built off principles and engineering from our line of racing calipers. This all billet caliper provides ultimate in strength for a better feel and performance. With a stronger bridge strength and more rigid caliper than most aftermarket aluminum calipers we are able to provide larger clamping force to achieve the brake torque to stop your vehicle. Choose your choice of color in powdercoat. \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003e12.19\" Slotted \u0026amp; Vented Rotor Balances Weight and Durability\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eOur cast vented and slotted 12.19\" rotor was designed to balance weight, stopping power, cooling ability, and looks while keeping the ability to package with most factory and aftermarket wheels 15\" and larger. These rotors are black plated to protect against rusting \/ corrosion and look good before first use and beyond.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eProven Brake Pad Technology:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eUtilizing the Hawk Performance HPS Ferro Carbon compound, this brake pad strikes the perfect balance of stopping potential without bringing noisy brake pads and large amounts of brake dust into play.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eBillet TBM Brake Hats\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eOur billet aluminum brake hats remove the weight of a steel center all in one rotor while allowing for minor adjustment of axle offset thanks to our unique stepped mounting design.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eNote\u003c\/b\u003e: We do not recommend the use of silicone based brake fluid with these calipers. Only use approved DOT3, DOT4, or DOT 5.1 brake fluid. We recommend using TBM Extreme 6 Fluid for best results.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eTo purchase TBM Extreme 6 DOT 5.1 fluid: \u003c\/b\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid?variant=42441905340628\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eCLICK HERE\u003c\/b\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThese brakes perform and operate best at 6-800 psi brake pressure under normal braking pressure. The proper master cylinder and pedal ratio is essential to proper performance. Don't know how to calculate this? Give our team a call, we are happy to help! (800) 878-9274\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cmeta charset=\"utf-8\"\u003eFor Max OD Reference of this kit for barrel fitment see below\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cimg alt='GM 60s\/70s Muscle Car XS3 Front Extreme Street Performance 12.19\" Brake Kit-TBM Brakes-Motion Raceworks' src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/MaxOD_e66b2845-0c95-442a-aee7-0e631c8fcac9.png?v=1720207581\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Onyx Black","offer_id":45182429265973,"sku":"012-0291-1","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Race Red","offer_id":45182429298741,"sku":"012-0291-2","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Satin Metallic Blue","offer_id":45182429331509,"sku":"012-0291-3","price":1529.0,"currency_code":"USD","in_stock":true},{"title":"Velocity Yellow","offer_id":45182429364277,"sku":"012-0291-4","price":1529.0,"currency_code":"USD","in_stock":true},{"title":"Gunmetal Gray","offer_id":45182429397045,"sku":"012-0291-5","price":1529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/XS3_Hat_Style_Red_0cc6bb19-e84e-40ee-8148-4740e42c4d00.jpg?v=1777399081"},{"product_id":"2024-silverado-2wd-4wd-medium-duty-4-piston-front-drag-racing-brake-kit-6x5-5-lug-front-brake-kit-003-0335-1","title":"22-24 Silverado 2WD\/4WD Medium Duty 4 Piston Front Drag Racing Brake Kit 6x5.5 lug Front Brake Kit 003-0335-1","description":"\u003cp\u003e\u003cstrong\u003e2024 Silverado Medium Duty 4 piston Drag Racing Front Brake Kit (Reusing Factory 6x5.5 Hubs) 003-0335-1 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1999-2018_Silverado_Front_Brake_Kit_6x5.5_001-0290.pdf?v=1707274922\" title=\"Silverado 5 \u0026amp; 6 Lug Front Brake Instructions\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstructions - CLICK HERE\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBrake Lines: 07-19 \u0026amp; 21-24 \u003ca href=\"https:\/\/tbmbrakes.com\/products\/21-24-silverado-front-brake-line-kit-for-tbm-brakes\"\u003eClick Here\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDual Line Lock Kit: \u003ca href=\"https:\/\/tbmbrakes.com\/products\/2022-24-silverado-sierra-tbm-dual-line-lock-kit-w-brackets\"\u003eClick Here\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTBM Brakes Medium Duty 4 piston Silverado \/ Sierra drag racing brakes are designed to deliver ultimate stopping power combined with huge weight savings and durability. Thanks to unmatched F3 4 piston caliper stopping power and a 12\" revolution rotor, you will have equal or increased stopping power compared to your factory brakes without carrying the weight. \u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNote: This Kit Reuses Factory Hubs\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: These only work with 17\" or larger wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit fits the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e22-24 Chevy Silverado 2WD \/ 4WD\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e22-24 GMC Sierra 2WD \/ 4WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight: 12.5lbs per side or 25 lbs overall. This kit saves 60 lbs over factory disc brakes (both sides).\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3 4 piston calipers\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-1\" title=\"F3 Caliper 1.75 DIA STAINLESS STEEL PISTON .500 RTR - 002-0192SSP-1\" data-mce-fragment=\"1\"\u003e002-0192SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/copy-of-f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-2\" title=\"Copy of F3 Caliper 1.75 DIA STAINLESS STEEL PISTON .500 RTR - 002-0192SSP-2\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0192SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #000000; text-decoration: underline;\"\u003e\u003ca style=\"color: #000000; text-decoration: underline;\" title=\"F3 Pad #1 Compound #1 - 6-0102W\" href=\"https:\/\/www.tbmbrakes.com\/products\/6-0102w\"\u003e#1 standard track pads 6-0102W\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e(2) 12.50 x .500” thermally treated revolution rotors\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Aluminum rotor hats 204-0226\u003c\/li\u003e\n\u003cli\u003e(2) Aluminum caliper mounting bracket 17-0060\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstallation of this kit will require 3AN lines that are sold separately\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-fragment=\"1\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb\u003e*Please use red Loctite on all rotor bolts*\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182430183477,"sku":"003-0335-1","price":1439.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/6LugTBM.jpg?v=1777399086"},{"product_id":"2022-24-silverado-sierra-tbm-dual-line-lock-kit-w-brackets","title":"2022-24 Silverado\/Sierra Dual Line Lock Kit w\/ Brackets","description":"\u003cp\u003e\u003cstrong\u003e2022-24 Silverado\/Sierra Dual Line Lock Kit w\/ Brackets \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bolt on dual line lock kit is an easy to plumb and mount kit for your 2022 to 2024 Silverado or Sierra Truck. This dual line lock kit allows you to attach the factory front brake hardline directly to the TBM line lock with the supplied adapters and brackets. The included brake line is designed to connect directly to your TBM F3, XS3, or Stock front caliper.\u003c\/p\u003e\n\u003cp\u003eThese line lock kits allow for easier burnout function with your Silverado\/Sierra by allowing to hold pressure to front brakes while holding no pressure to rear brakes when activated. \u003c\/p\u003e\n\u003cp\u003eNote: Wiring is required for line locks to function. See instructions for line lock functionality. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Line-Lock-Instructions.pdf?22178\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: If not utilizing, you will need to install a plug in the sensor port location of the line locks.\u003c\/p\u003e\n\u003cp\u003eNote: Slight bending of the factory hardline may be required, as well as bending of the factory driver side brake line mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) T52-1022 TBM Line Lock\u003c\/li\u003e\n\u003cli\u003e(2) Factory Brake Line Adapters (M12x1.0)\u003c\/li\u003e\n\u003cli\u003e(2) 12-2029 Line Lock Bracket\u003c\/li\u003e\n\u003cli\u003e(2) 24\" Brake Lines\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardware Kit\u003c\/li\u003e\n\u003cli\u003e(2) Pigtail wiring for linelock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStock Caliper Kit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStock Caliper Banjo Adapter 12-2037\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTBM Brakes Line Lock Benefits\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e3AN or 3\/16 Brake Lines – No Pipe Adapters!\u003c\/li\u003e\n\u003cli\u003eLow Amp Draw (1.5A Typ.)\u003c\/li\u003e\n\u003cli\u003e12-20V Input\u003c\/li\u003e\n\u003cli\u003eLight Weight (350 grams)\u003c\/li\u003e\n\u003cli\u003eFly-Back Diode in Coil\u003c\/li\u003e\n\u003cli\u003eIP67 Coil and Deutsch Connector\u003c\/li\u003e\n\u003cli\u003eHarness Included\u003c\/li\u003e\n\u003cli\u003eRated for 3000psi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePressure sensor port for 1\/8\" NPT female. This sensor port is known to clear SSI, Holley, and RIFE pressure sensors. Other sensors may be too large to clear fittings when directly mounted and may require a 90 or 45 degree male\/female fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/MRW_8164-1_b0b36bf6-c30f-4797-afb3-23bd751ebc97.jpg?v=1719417077\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"TBM Brakes","offers":[{"title":"TBM Brakes","offer_id":45182432510005,"sku":"LLK-GMT-1","price":389.99,"currency_code":"USD","in_stock":true},{"title":"Stock Brakes","offer_id":45182432542773,"sku":"LLK-GMT-1-STK","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/S550_LL_15-23-Photoroom_dc8379d6-b21f-4466-9dd3-eac44e52f238.jpg?v=1777399104"},{"product_id":"99-06-silverado-sierra-front-brake-line-kit-for-tbm-brakes","title":"99-06 Silverado\/Sierra Front Brake Line Kit for TBM Brakes","description":"\u003cp\u003e99-06 Silverado\/Sierra Front Brake Line Kit for TBM Brakes (TB-FBK31)\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"3AN 90 degree on one end, 14in stainless black braided line, factory brake line fitting adapter on the other end.\\n\\nDesigned to connect factory lines to TBM calipers\"}' data-sheets-root=\"1\"\u003e3AN 90 degree on one end, 31in stainless black braided line, factory brake line fitting adapter on the other end.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"3AN 90 degree on one end, 14in stainless black braided line, factory brake line fitting adapter on the other end.\\n\\nDesigned to connect factory lines to TBM calipers\"}' data-sheets-root=\"1\"\u003e\u003cstrong\u003e*Note: This brake line kit is designed to work with trucks that have the factory hardline mounted in front of the upper control arm on the forward frame rail.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"3AN 90 degree on one end, 14in stainless black braided line, factory brake line fitting adapter on the other end.\\n\\nDesigned to connect factory lines to TBM calipers\"}' data-sheets-root=\"1\"\u003e\u003cbr\u003e\u003cstrong\u003eDesigned to connect factory lines to TBM calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"3AN 90 degree on one end, 14in stainless black braided line, factory brake line fitting adapter on the other end.\\n\\nDesigned to connect factory lines to TBM calipers\"}' data-sheets-root=\"1\"\u003e\u003cstrong\u003e\u003cspan data-sheets-userformat='{\"2\":16897,\"3\":{\"1\":0},\"12\":0,\"17\":1}' data-sheets-value='{\"1\":2,\"2\":\"Kit Includes: Two Vehicle Specific Brake Lines\"}' data-sheets-root=\"1\"\u003eKit Includes: Two Vehicle Specific Brake Lines\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182436409397,"sku":"TB-FBK31","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/TB-FBK25-Photoroom_4bc92afa-b60d-4421-b4b0-94ea20401ed3.jpg?v=1777399142"},{"product_id":"21-24-silverado-front-brake-line-kit-for-tbm-brakes","title":"07-19 \u0026 21-24 Silverado\/Sierra Front Brake Line Kit for TBM Brakes","description":"\u003cp\u003e07-19 \u0026amp; 21-24 Silverado Front Brake Line Kit for TBM Brakes (TB-FBK24-1)\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"3AN 90 degree on one end, 14in stainless black braided line, factory brake line fitting adapter on the other end.\\n\\nDesigned to connect factory lines to TBM calipers\"}' data-sheets-root=\"1\"\u003e3AN 90 degree on one end, 24in stainless black braided line, factory brake line fitting adapter on the other end.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"3AN 90 degree on one end, 14in stainless black braided line, factory brake line fitting adapter on the other end.\\n\\nDesigned to connect factory lines to TBM calipers\"}' data-sheets-root=\"1\"\u003e\u003cstrong\u003e*Note 07-19 Trucks: This brake line kit will work for your truck if the factory hardline is mounted to the backside of the upper control arm frame mount*\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned to connect factory lines to TBM calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"3AN 90 degree on one end, 14in stainless black braided line, factory brake line fitting adapter on the other end.\\n\\nDesigned to connect factory lines to TBM calipers\"}' data-sheets-root=\"1\"\u003e\u003cstrong\u003e\u003cspan data-sheets-userformat='{\"2\":16897,\"3\":{\"1\":0},\"12\":0,\"17\":1}' data-sheets-value='{\"1\":2,\"2\":\"Kit Includes: Two Vehicle Specific Brake Lines\"}' data-sheets-root=\"1\"\u003eKit Includes: Two Vehicle Specific Brake Lines\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182437195829,"sku":"TB-FBK24-1","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/TB-FBK25-Photoroom_4c27de0d-c64b-4509-b115-96a5b1e6a5f6.jpg?v=1777399153"},{"product_id":"ls-oil-cap-to-12orb-male-fitting-by-fluidworks","title":"LS Billet Vented Oil Cap to -12ORB Male Fitting by Motion Raceworks","description":"\u003ch3\u003eLS Oil Cap to -12ORB Male Fitting by Motion Raceworks 34-00045\u003c\/h3\u003e\n\u003cp\u003eEasily add a PCV connection to your factory LS valve covers with this billet oil cap with machined in baffling. This screws directly into LS factory valve covers and has a -12ORB female thread. This means you can adapt up and down to whatever AN size needed to connect your catch can or breather system.\u003c\/p\u003e\n\u003cp\u003eAdd fitting in the drop down below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No Fitting","offer_id":45182437294133,"sku":"34-00045","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Add -12ORB to 12AN Fitting (34-11212)","offer_id":45182437326901,"sku":"34-00045-2","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Add -12ORB to 10AN Fitting (34-11012)","offer_id":45182437359669,"sku":"34-00045-3","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Add -12ORB to 8AN Fitting (34-10812)","offer_id":45182437392437,"sku":"34-00045-4","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_2356_a4015c84-b89f-4334-b205-4578be1f2b1d.jpg?v=1777399156"},{"product_id":"99-18-silverado-2wd-4wd-xs3-front-extreme-street-brake-kit-6-lug","title":"99-18 Silverado 2WD\/4WD XS3 Front Extreme Street Brake Kit 6 lug","description":"\u003ch3\u003e\u003cstrong\u003e99-18 Silverado 2WD\/4WD XS3 Front Extreme Street Performance 12.19\" Brake Kit 6 (6x5.5) lug 012-0290\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNote: This Kit Reuses Factory Hubs with 14mm wheel studs\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1999-2018_Chevy_Silverado_Front_XS3_-_012-0290.pdf?v=1726518472\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eClick Here\u003c\/span\u003e\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eFactory brake weight (both sides): 85lbs\u003c\/p\u003e\n\u003cp\u003eXS3 Brake weight (both sides): 34lbs\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThis kit saves over 51lbs total over factory brakes!\u003c\/strong\u003e\u003c\/em\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eBuilt with over 30 years of heritage in racing, TBM Brakes introduces its first purpose built street performance brake kit, the XS3 series featuring a 12.19\" vented rotor. Designed to be the bridge between our lightweight single thickness steel racing brakes and the large diameter rotor street performance brakes commonly seen in late model vehicles while providing incredible stopping power.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis brake kit was specifically designed to give the ability to run smaller diameter \/ factory size wheels without sacrificing braking potential. We even found this kit able to work with many steel factory 15\" wheels as well as drag racing wheels. \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eBillet caliper housings machined from solid 6061 Aluminum Alloy\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eCrossflow caliper design eliminates external tubes, and promotes equal pressure to piston distribution \u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e(4) 1.75\" OD pistons per caliper deliver exceptional stopping power and pedal feedback\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eBillet CNC Machined 304 Stainless Steel Pistons\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eTwo Part Durable Powdercoated Calipers (choose color in options)\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eBlack Anodized Brackets, Hats\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eDark Zinc Plated rotors offer corrosion resistance before and after installation (please note rotor color can vary due to process)\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eUnique Cross flow fluid design for smoother operation\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e12 point hardware\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eRace derived caliper design provides excellent stopping and better pedal feel\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eMade in the USA in our Bradenton, FL location!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(1) 12.19\" vented rotors 3-12198108778-1\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(1) 12.19\" vented rotors 3-12198108778-2\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(2) Billet Aluminum brake hat 205-0008\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(2) XS3 4 Piston Caliper (Choose color below)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(2) Caliper Bracket 17-0079\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eComplete Set of Pads \u003c\/b\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/sx3-replacement-brake-pads-6-0002hps\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003e6-0002HPS\u003c\/b\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eHardware Kit 011-0338\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eThis kit fits the following:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1998-2018 Silverado 2WD\/4WD\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1998-2018 Sierra 2WD\/4WD\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eInnovative caliper with class leading stopping power!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe XS3 Extreme Street caliper is an innovative new design built off principles and engineering from our line of racing calipers. This all billet caliper provides ultimate in strength for a better feel and performance. With a stronger bridge strength and more rigid caliper than most aftermarket aluminum calipers we are able to provide larger clamping force to achieve the brake torque to stop your vehicle. Choose your choice of color in powdercoat. \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003e12.19\" Slotted \u0026amp; Vented Rotor Balances Weight and Durability\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eOur cast vented and slotted 12.19\" rotor was designed to balance weight, stopping power, cooling ability, and looks while keeping the ability to package with most factory and aftermarket wheels 15\" and larger. These rotors are black plated to protect against rusting \/ corrosion and look good before first use and beyond.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eProven Brake Pad Technology:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eUtilizing the Hawk Performance HPS Ferro Carbon compound, this brake pad strikes the perfect balance of stopping potential without bringing noisy brake pads and large amounts of brake dust into play.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eBillet TBM Brake Hats\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eOur billet aluminum brake hats remove the weight of a steel center all in one rotor while allowing for minor adjustment of axle offset thanks to our unique stepped mounting design.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eNote\u003c\/b\u003e: We do not recommend the use of silicone based brake fluid with these calipers. Only use approved DOT3, DOT4, or DOT 5.1 brake fluid. We recommend using TBM Extreme 6 Fluid for best results.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eTo purchase TBM Extreme 6 DOT 5.1 fluid: \u003c\/b\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid?variant=42441905340628\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eCLICK HERE\u003c\/b\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThese brakes perform and operate best at 6-800 psi brake pressure under normal braking pressure. The proper master cylinder and pedal ratio is essential to proper performance. Don't know how to calculate this? Give our team a call, we are happy to help! (800) 878-9274\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cmeta charset=\"utf-8\"\u003eFor Max OD Reference of this kit for barrel fitment see below\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/MaxOD_e66b2845-0c95-442a-aee7-0e631c8fcac9.png?v=1720207581\" alt='GM 60s\/70s Muscle Car XS3 Front Extreme Street Performance 12.19\" Brake Kit-TBM Brakes-Motion Raceworks'\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\" data-mce-href=\"http:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Onyx Black","offer_id":45182439882805,"sku":"012-0290-1","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Race Red","offer_id":45182439915573,"sku":"012-0290-2","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Satin Metallic Blue","offer_id":45182439948341,"sku":"012-0290-3","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Velocity Yellow","offer_id":45182439981109,"sku":"012-0290-4","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Gunmetal Gray","offer_id":45182440013877,"sku":"012-0290-5","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/XS3_6_Lug_Hat_Red_53cd92bc-7d79-4231-9550-d30ba0a40fd0.jpg?v=1777399191"},{"product_id":"push-in-fitting-for-factory-gm-ls-valve-cover-grommet-motion-raceworks-34-010ls","title":"10AN Push in Fitting for Factory GM LS Valve cover grommet","description":"\u003ch3\u003e10AN Push in Fitting for Factory GM LS Valve cover grommet Motion Raceworks\u003c\/h3\u003e\n\u003cp\u003eThis billet aluminum fitting presses into the driver side rear valve cover grommet on Gen 3 and 4 LS engines to adapt to 10AN for easy connection of PCV systems. \u003c\/p\u003e\n\u003cp\u003eMade in the USA\u003c\/p\u003e\n\u003cp\u003eIncludes grommet for use if not using in intended valve cover use\u003c\/p\u003e\n\u003c!----\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182452826165,"sku":"34-010LS","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_0979_767d88ce-9cc5-4559-96ea-30a5e78b2caa.jpg?v=1777399324"},{"product_id":"blem-motion-raceworks-gold-billet-ls-valve-covers-10-120gld-blem","title":"BLEM Motion Raceworks GOLD Billet LS Valve Covers 10-120GLD-BLEM","description":"\u003cp\u003e\u003cstrong\u003eBLEM Motion Raceworks GOLD Billet LS Valve Covers 10-120GLD *BLEM*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese have minor scratches or blemishes in the anodizing \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMotion Raceworks seeks to innovate their way into simplifying builds while focusing on aesthetics and overall function! These billet LS1 valve covers are a showcase and a prime example of this.   \u003c\/p\u003e\n\u003cp\u003eThe result is a valve cover that is something that can be used for a HUGE variety of builds without sacrificing looks or function. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" title=\"Billet LS Valve Cover Instructions 10-120\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003e(1) Billet Oil Cap (16 ORB)\u003c\/li\u003e\n\u003cli\u003e(2) Breather Fittings (Choose 10AN or 12AN in options)\u003c\/li\u003e\n\u003cli\u003ePre-Installed Baffles\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOptional:\u003c\/b\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cb\u003eAdd LS1 Multi Fit Coil Brackets 10-12007: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd D585 Coil Brackets 10-12008: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cb\u003eAdd Smart Coil (IGN1A) Brackets 10-12009 (Also Fits MSD\/Fueltech CDI Coils): See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGold Anodized Finish\u003c\/li\u003e\n\u003cli\u003eInnovative Coil Mounting Design Adapts Nearly Every Style Coil without sacrificing looks when not running coil packs.  \u003c\/li\u003e\n\u003cli\u003eValve Cover able to be removed without unbolting coil packs\u003c\/li\u003e\n\u003cli\u003eBaffled -12ORB Breathers adaptable to 10AN and 12AN\u003c\/li\u003e\n\u003cli\u003eBillet Oil Cap (-16 ORB)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eCoil-pack mounting able to be changed at later time with A la Carte Coil Pack brackets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA variety of factors go into keeping coil packs on the valve cover including looks, serviceability, coil choice, clearance for fittings, header design, and more.  Whether you choose to run coils or not, this cover is perfect for you.  Featuring a top rail mounting design, if you do not wish to run coils, there are no leftover mounting bosses or holes that are unsightly or in plain view.  If you decide to run coil packs, every LS coil made as well as aftermarket coils such as Smart Coils (IGN1A), CDI can be used.  We thought of everything. To add the brackets, you simply choose the bracket options in the listing or add ala carte at a later time.  \u003c\/p\u003e\n\u003cp\u003eEvery coil bracket is adjustable and clears not only the breather fittings, but also allows for a large billet oil cap. Finally valve cover hardware to remove valve cover is accessible and usable with coils on the car.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, coil packs have been checked and will clear intakes, fuel rails, and even wide hanging superchargers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt Motion Raceworks we understand PCV and crank case pressure is unavoidable.  We also believe that filling catch cans up with oil due to poor breather design is not acceptable.  This valve cover features a long high flow breather channel which will remove excess crank case pressure, and is serviceable by removing C-Clips. Our cover was machined on the top side to receive one of our custom low profile -12 ORB fittings.  This means you can adapt to 10AN or 12AN. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Custom fittings were designed and made to allow for packaging and clearance of internal baffling, standard -12ORB fittings will not work.  Fittings Included, but also sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCoil-Pack Identifier and Links\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eD585: Heat Sink Truck Style\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Fit Brackets: LS3 L92 LS1 (F-Body) LQ4, Gen V LT\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSmart Coil IGN1A \/ CDI\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\"\u003ehttps:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Rocker Clearance: Does clear factory rocker arms, as well as TSP Roller Tip Rocker arms.  Not known to clear most aftermarket Roller Rockers.***  Does not clear shaft mounted rockers \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\" alt=\"LS Billet Valve Cover Dimensions\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"10AN (34-11012 (x2)) \/ None","offer_id":45182478057525,"sku":"10-120GLD-BLEM-1","price":499.99,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ None","offer_id":45182478090293,"sku":"10-120GLD-BLEM-5","price":499.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/376385273_203753026048388_7042787426375275800_n_a70a65c0-22c4-40f6-84b3-990d4eec52da.jpg?v=1777399555"},{"product_id":"motion-raceworks-clear-anodized-billet-ls-valve-covers-10-120clr","title":"Motion Raceworks Clear Anodized Billet LS Valve Covers","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks Clear Anodized Billet LS Valve Covers 10-120CLR *LIMITED  EDITION*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMotion Raceworks seeks to innovate their way into simplifying builds while focusing on aesthetics and overall function! These billet LS1 valve covers are a showcase and a prime example of this.   \u003c\/p\u003e\n\u003cp\u003eThe result is a valve cover that is something that can be used for a HUGE variety of builds without sacrificing looks or function. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e \u003ca title=\"Billet LS Valve Cover Instructions 10-120\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003e(1) Billet Oil Cap (16 ORB)\u003c\/li\u003e\n\u003cli\u003e(2) Breather Fittings (Choose 10AN or 12AN in options)\u003c\/li\u003e\n\u003cli\u003ePre-Installed Baffles\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOptional:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd LS1 Multi Fit Coil Brackets 10-12007: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd D585 Coil Brackets 10-12008: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd Smart Coil (IGN1A) Brackets 10-12009 (Also Fits MSD\/Fueltech CDI Coils): See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClear Anodized Finish\u003c\/li\u003e\n\u003cli\u003eInnovative Coil Mounting Design Adapts Nearly Every Style Coil without sacrificing looks when not running coil packs.  \u003c\/li\u003e\n\u003cli\u003eValve Cover able to be removed without unbolting coil packs\u003c\/li\u003e\n\u003cli\u003eBaffled -12ORB Breathers adaptable to 10AN and 12AN\u003c\/li\u003e\n\u003cli\u003eBillet Oil Cap (-16 ORB)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eCoil-pack mounting able to be changed at later time with A la Carte Coil Pack brackets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA variety of factors go into keeping coil packs on the valve cover including looks, serviceability, coil choice, clearance for fittings, header design, and more.  Whether you choose to run coils or not, this cover is perfect for you.  Featuring a top rail mounting design, if you do not wish to run coils, there are no leftover mounting bosses or holes that are unsightly or in plain view.  If you decide to run coil packs, every LS coil made as well as aftermarket coils such as Smart Coils (IGN1A), CDI can be used.  We thought of everything. To add the brackets, you simply choose the bracket options in the listing or add ala carte at a later time.  \u003c\/p\u003e\n\u003cp\u003eEvery coil bracket is adjustable and clears not only the breather fittings, but also allows for a large billet oil cap. Finally valve cover hardware to remove valve cover is accessible and usable with coils on the car.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, coil packs have been checked and will clear intakes, fuel rails, and even wide hanging superchargers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt Motion Raceworks we understand PCV and crank case pressure is unavoidable.  We also believe that filling catch cans up with oil due to poor breather design is not acceptable.  This valve cover features a long high flow breather channel which will remove excess crank case pressure, and is serviceable by removing C-Clips. Our cover was machined on the top side to receive one of our custom low profile -12 ORB fittings.  This means you can adapt to 10AN or 12AN. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Custom fittings were designed and made to allow for packaging and clearance of internal baffling, standard -12ORB fittings will not work.  Fittings Included, but also sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCoil-Pack Identifier and Links\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eD585: Heat Sink Truck Style\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\"\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003ehttps:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Fit Brackets: LS3 L92 LS1 (F-Body) LQ4, Gen V LT\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\"\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003ehttps:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSmart Coil IGN1A \/ CDI\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\"\u003ehttps:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Rocker Clearance: Does clear factory rocker arms, as well as TSP Roller Tip Rocker arms.  Not known to clear most aftermarket Roller Rockers.***  Does not clear shaft mounted rockers \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg data-mce-fragment=\"1\" alt=\"LS Billet Valve Cover Dimensions\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\"\u003e\u003cbr\u003e\u003cbr\u003ePlease use dimensions to verify fitment on your project\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"10AN (34-11012 (x2)) \/ None","offer_id":45182489395253,"sku":"10-120CLR-1","price":599.99,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182489428021,"sku":"10-120CLR-2","price":708.0,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182489460789,"sku":"10-120CLR-3","price":708.0,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182489493557,"sku":"10-120CLR-4","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ None","offer_id":45182489526325,"sku":"10-120CLR-5","price":599.99,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182489559093,"sku":"10-120CLR-6","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182489591861,"sku":"10-120CLR-7","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182489624629,"sku":"10-120CLR-8","price":708.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/Image_3.jpg?v=1777399645"},{"product_id":"motion-raceworks-gold-billet-ls-valve-covers-10-120gld","title":"Motion Raceworks GOLD Billet LS Valve Covers","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks GOLD Billet LS Valve Covers 10-120GLD \u003cem\u003eLIMITED EDITION\u003c\/em\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMotion Raceworks seeks to innovate their way into simplifying builds while focusing on aesthetics and overall function! These billet LS1 valve covers are a showcase and a prime example of this.   \u003c\/p\u003e\n\u003cp\u003eThe result is a valve cover that is something that can be used for a HUGE variety of builds without sacrificing looks or function. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" title=\"Billet LS Valve Cover Instructions 10-120\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003e(1) Billet Oil Cap (16 ORB)\u003c\/li\u003e\n\u003cli\u003e(2) Breather Fittings (Choose 10AN or 12AN in options)\u003c\/li\u003e\n\u003cli\u003ePre-Installed Baffles\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOptional:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd LS1 Multi Fit Coil Brackets 10-12007: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd D585 Coil Brackets 10-12008: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd Smart Coil (IGN1A) Brackets 10-12009 (Also Fits MSD\/Fueltech CDI Coils): See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGold Anodized Finish\u003c\/li\u003e\n\u003cli\u003eInnovative Coil Mounting Design Adapts Nearly Every Style Coil without sacrificing looks when not running coil packs.  \u003c\/li\u003e\n\u003cli\u003eValve Cover able to be removed without unbolting coil packs\u003c\/li\u003e\n\u003cli\u003eBaffled -12ORB Breathers adaptable to 10AN and 12AN\u003c\/li\u003e\n\u003cli\u003eBillet Oil Cap (-16 ORB)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eCoil-pack mounting able to be changed at later time with A la Carte Coil Pack brackets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA variety of factors go into keeping coil packs on the valve cover including looks, serviceability, coil choice, clearance for fittings, header design, and more.  Whether you choose to run coils or not, this cover is perfect for you.  Featuring a top rail mounting design, if you do not wish to run coils, there are no leftover mounting bosses or holes that are unsightly or in plain view.  If you decide to run coil packs, every LS coil made as well as aftermarket coils such as Smart Coils (IGN1A), CDI can be used.  We thought of everything. To add the brackets, you simply choose the bracket options in the listing or add ala carte at a later time.  \u003c\/p\u003e\n\u003cp\u003eEvery coil bracket is adjustable and clears not only the breather fittings, but also allows for a large billet oil cap. Finally valve cover hardware to remove valve cover is accessible and usable with coils on the car.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, coil packs have been checked and will clear intakes, fuel rails, and even wide hanging superchargers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt Motion Raceworks we understand PCV and crank case pressure is unavoidable.  We also believe that filling catch cans up with oil due to poor breather design is not acceptable.  This valve cover features a long high flow breather channel which will remove excess crank case pressure, and is serviceable by removing C-Clips. Our cover was machined on the top side to receive one of our custom low profile -12 ORB fittings.  This means you can adapt to 10AN or 12AN. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Custom fittings were designed and made to allow for packaging and clearance of internal baffling, standard -12ORB fittings will not work.  Fittings Included, but also sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCoil-Pack Identifier and Links\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eD585: Heat Sink Truck Style\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Fit Brackets: LS3 L92 LS1 (F-Body) LQ4, Gen V LT\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSmart Coil IGN1A \/ CDI\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\"\u003ehttps:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Rocker Clearance: Does clear factory rocker arms, as well as TSP Roller Tip Rocker arms.  Not known to clear most aftermarket Roller Rockers.***  Does not clear shaft mounted rockers \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\" alt=\"LS Billet Valve Cover Dimensions\"\u003e\u003cbr\u003e\u003cbr\u003ePlease use dimensions to verify fitment on your project\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"10AN (34-11012 (x2)) \/ None","offer_id":45182489952309,"sku":"10-120GLD-1","price":599.99,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182489985077,"sku":"10-120GLD-2","price":708.0,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182490017845,"sku":"10-120GLD-3","price":708.0,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182490050613,"sku":"10-120GLD-4","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ None","offer_id":45182490083381,"sku":"10-120GLD-5","price":599.99,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182490116149,"sku":"10-120GLD-6","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182490148917,"sku":"10-120GLD-7","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182490181685,"sku":"10-120GLD-8","price":708.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_8051.jpg?v=1777399650"},{"product_id":"1988-98-gm-obs-1500-f3-caliper-front-medium-duty-drag-racing-brakes-001-0320-1","title":"1988-98 GM OBS 1500 5x4.75 Lug Pattern F3 Caliper Front Medium Duty Drag Racing Brakes - 001-0320-1","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e1988-98 GM OBS 1500 5x4.75 Lug Pattern F3 Caliper Front Medium Duty Drag Racing Brakes - 001-0320-1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnrivaled stopping power delivered by the industry leading F3 4 piston caliper and our .500 thick Revolution Rotor. This is the most powerful steel drag racing brake for the most demanding of applications while keeping crucial rotating mass and longevity in mind.\u003cbr\u003e\u003cbr\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1988-1998_GM_OBS_1500_F3_Medium_Duty_Front_Drag_Brakes_-_001-0320.pdf?v=1711397441\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1988-1998_GM_OBS_1500_F3_Medium_Duty_Front_Drag_Brakes_-_001-0320.pdf?v=1711397441\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit fits the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1988-1998 Chevy Silverado 2WD\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1988-1998 GMC Sierra 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWeight: 12.5lbs per side or 25 lbs overall. This kit saves 60 lbs over factory disc brakes (both sides).\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3 4 piston calipers\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"F3 Caliper 1.75 DIA STAINLESS STEEL PISTON .500 RTR - 002-0192SSP-1\" href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-1\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-1\"\u003e002-0192SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca title=\"Copy of F3 Caliper 1.75 DIA STAINLESS STEEL PISTON .500 RTR - 002-0192SSP-2\" href=\"https:\/\/www.tbmbrakes.com\/products\/copy-of-f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-2\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/copy-of-f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-2\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0192SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e#1 Standard F3 Pads\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f3-pads\" target=\"_blank\"\u003e\u003cspan face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e6-1020W\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) 11.75 x .500” thermally treated revolution rotors\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(2) Billet Lightweight OBS 5x4.75 Hubs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e(2) Aluminum rotor hats 204-0017R Hats\u003c\/li\u003e\n\u003cli\u003e(2) Aluminum caliper mounting bracket 16-0226\u003c\/li\u003e\n\u003cli\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* Installation of this kit will require 3AN lines that are sold separately. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e* These kits are designed to be used on spindles that accept a 1.375\" Inner Wheel Bearing. These spindles are commonly found on 92-98 model year trucks, however please verify the measurement on your spindles to ensure fitment. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.motionraceworks.com\/products\/tbm-dot-5-1-extreme-6-high-temp-brake-fluid-1-pint\" target=\"_blank\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182496047157,"sku":"001-0320-1","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/2010-2022chevroletcamaroreardragracingbrakekit_b10c80c1-545f-4698-966d-8eb83e9f6c93.jpg?v=1777399698"},{"product_id":"motion-valve-cover-fittings-12-orb-to-12an-single-34-00003s","title":"'-12AN to -12ORB Male Aluminum Fitting by Fluidworks","description":"\u003cp\u003e\u003cstrong\u003e-12AN to -12ORB Male Aluminum Fitting by Fluidworks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP\/N 34-11212\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluidworks ORB fittings feature a high taper transition for optimum flow and flow characteristics. \u003c\/p\u003e\n\u003cp\u003eMade in the USA from US 6061 Aluminum\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined in house in Dewitt, IA\u003c\/li\u003e\n\u003cli\u003e-12ORB Male \/  1 1\/16-12 (12) Male\u003c\/li\u003e\n\u003cli\u003e-12AN Male\u003c\/li\u003e\n\u003cli\u003eBlack Anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182503452725,"sku":"34-11212","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/12_orb_to_12_an-Photoroom_d80e8883-ab04-424f-a22b-485b8b2f0e5e.jpg?v=1777399752"},{"product_id":"1999-18-silverado-rear-drag-brake-kit-f3-4-piston-calipers-6-x-5-5-bc-big-ford-new-late-torino-housing-ends-001-0187a6-1","title":"1999-18 Silverado Rear Drag Brake Kit F3 4 Piston Calipers 6 x 5.5 BC (Big Ford New \/ Late \/ Torino Housing Ends) 001-0187A6-1","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSilverado Rear Drag Brake Kit F3 4 Piston Calipers 6 x 5.5 BC (Big Ford New \/ Late \/ Torino Housing Ends) 001-0187A6-1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) F3 Calipers\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/tbm-brakes.myshopify.com\/admin\/products\/F3%20Caliper,%201.75%22%20Diameter%20Piston,%203\/8%22%20Rotor%20-%20002-0056ssp-1\" title='F3 Caliper, 1.75\" Diameter Piston, 3\/8\" Rotor - 002-0056ssp-1' data-mce-href=\"https:\/\/tbm-brakes.myshopify.com\/admin\/products\/F3%20Caliper,%201.75%22%20Diameter%20Piston,%203\/8%22%20Rotor%20-%20002-0056ssp-1\" data-mce-fragment=\"1\"\u003e002-0056SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/002-0056ssp-2\" title='F3 Caliper, 1.75\" Diameter Piston, 3\/8\" Rotor - 002-0056ssp-2' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0056ssp-2\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0056SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) 11.500\"x.375 rotors\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/3-1150375d\" title='Revolution Rotor 11.50\" x .375\", 8 on 7.00\" Bolt Circle - (Drilled) - 3-1150375D' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/3-1150375d\" data-mce-fragment=\"1\"\u003e3-1150375D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) \u003cmeta charset=\"utf-8\"\u003e#1 Standard F3 Pads\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f3-pads\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.motionraceworks.com\/products\/f3-pads\" target=\"_blank\"\u003e\u003cspan face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\" data-mce-fragment=\"1\"\u003e6-1020W\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) Caliper mounting brackets \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/9-ford-drag-racing-left-rear-caliper-bracket-16-0120-1150-1\" title='9\" Ford Drag Racing Left Rear Caliper Bracket - 16-0120-1150-1' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/9-ford-drag-racing-left-rear-caliper-bracket-16-0120-1150-1\" data-mce-fragment=\"1\"\u003e16-0120-1150-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\/ \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/9-ford-drag-racing-right-rear-caliper-bracket-16-0120-1150-2\" title='9\" Ford Drag Racing Right Rear Caliper Bracket - 16-0120-1150-2' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/9-ford-drag-racing-right-rear-caliper-bracket-16-0120-1150-2\" data-mce-fragment=\"1\"\u003e16-0120-1150-2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) Hats for 6 x 5.5 Bolt Circle (GM Truck Late)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounting hardware kit\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/011-0187\" title=\"Hardware Kit, Rear Drag Race - 011-0187\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/011-0187\" data-mce-fragment=\"1\"\u003e011-0187\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor custom bolt pattern please contact us directly, otherwise OE factory bolt pattern will be issued.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease note this rotor hat is designed as such:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMaximum inner hub diameter: 6.250\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHub inner register diameter: 3.070\"\u003c\/p\u003e\n\u003cdiv class=\"description bottom\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e*Please Call for lead times before ordering*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e*Please use red Loctite on all rotor bolts*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0187A.pdf?v=1638825744\" title=\"Rear Drag Racing Brake Kit Big Ford New Housing Ends 001-0187A\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0187A.pdf?v=1638825744\" data-mce-fragment=\"1\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-fragment=\"1\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg alt=\"Rear Flange Chart\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/rear_housing_flange_chart_1024x1024.png?v=1645480416\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/rear_housing_flange_chart_1024x1024.png?v=1645480416\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182512398389,"sku":"001-0187A6-1","price":1479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/6LugTBM_7ec37314-d856-4638-8a08-6183793a1253.jpg?v=1777399839"},{"product_id":"motion-raceworks-1995-98-chevrolet-silverado-gmc-sierra-chromoly-lightweight-steering-column-race-only","title":"1995-98 Chevrolet Silverado GMC Sierra Chromoly Lightweight Steering Column","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks 1995-98 Chevrolet Silverado GMC Sierra Chromoly Lightweight Steering Column - Race Only 15-290\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003eThis column utilizes American made and SFI parts to create a very safe and high quality column. This column is professionally tig welded using Chromoly material for weight reduction. \u003c\/p\u003e\n\u003cp\u003eOur columns \u003cspan\u003ecome standard with Motion Raceworks 5\/6 bolt SFI approved quick release installed and welded.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eComes powdercoated gloss black\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStandard:\u003c\/p\u003e\n\u003cp\u003e-Powdercoated Steering Column\u003c\/p\u003e\n\u003cp\u003e-Inner Shaft w\/ welded quick release\u003c\/p\u003e\n\u003cp\u003e-Motion SFI Quick Release for 5\/6 bolt steering wheels\u003c\/p\u003e\n\u003cp\u003e-Split lock collar for bottom of column\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-Add Intermediate Steering Shaft with U joints in the options for a complete solution. Includes (1) 15\" double D shaft, (1) 3\/4 round to 3\/4 DD Ujoint and (1) 3\/4 DD to 3\/4 30 Spline for Factory Steering Box, (1) locating bushing to work with factory firewall grommet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor steering wheel options please visit this link: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Steering Wheels\" href=\"https:\/\/www.motionraceworks.com\/collections\/steering-wheel-and-accessories\" target=\"_blank\"\u003e\u003cstrong\u003ehttps:\/\/www.motionraceworks.com\/collections\/steering-wheel-and-accessories\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLearn more about U-Joints and Intermediate Steering Shafts by watching the video below!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/A0mbVBebJvo\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No I'll make my own \/ No Steering Wheel","offer_id":45182515544117,"sku":"15-290-1","price":349.99,"currency_code":"USD","in_stock":true},{"title":"No I'll make my own \/ Add MPI Motion Edition Race Steering Wheel All Black (MPI-DRG-R513-BLK-MRW)","offer_id":45182515576885,"sku":"15-290-3","price":514.98,"currency_code":"USD","in_stock":true},{"title":"No I'll make my own \/ Add MPI Motion Edition Race Steering Wheel w\/Orange Stripe (MPI-DRG-R513-MRW)","offer_id":45182515609653,"sku":"15-290-4","price":514.98,"currency_code":"USD","in_stock":true},{"title":"Add Shaft and U-Joints to Connect to Factory Steering Box (15-50020)(15-50001)(15-50002)(15-29101) \/ No Steering Wheel","offer_id":45182515642421,"sku":"15-290-2","price":572.99,"currency_code":"USD","in_stock":true},{"title":"Add Shaft and U-Joints to Connect to Factory Steering Box (15-50020)(15-50001)(15-50002)(15-29101) \/ Add MPI Motion Edition Race Steering Wheel All Black (MPI-DRG-R513-BLK-MRW)","offer_id":45182515675189,"sku":"15-290-5","price":722.98,"currency_code":"USD","in_stock":true},{"title":"Add Shaft and U-Joints to Connect to Factory Steering Box (15-50020)(15-50001)(15-50002)(15-29101) \/ Add MPI Motion Edition Race Steering Wheel w\/Orange Stripe (MPI-DRG-R513-MRW)","offer_id":45182515707957,"sku":"15-290-6","price":722.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/silverado-3.jpg?v=1777399864"},{"product_id":"motion-raceworks-1988-94-chevrolet-silverado-gmc-sierra-chromoly-lightweight-steering-column-race-only","title":"1988-94 OBS Chevrolet Silverado GMC Sierra Chromoly Lightweight Steering Column","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks 1988-94 Chevrolet Silverado GMC Sierra Chromoly Lightweight Steering Column - Race Only 15-280\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003eThis column utilizes American made and SFI parts to create a very safe and high quality column. This column is professionally tig welded using Chromoly material for weight reduction. \u003c\/p\u003e\n\u003cp\u003eOur columns \u003cspan\u003ecome standard with Motion Raceworks 5\/6 bolt SFI approved quick release installed and welded.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eComes powdercoated gloss black\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eStandard:\u003c\/p\u003e\n\u003cp\u003e-Powdercoated Steering Column\u003c\/p\u003e\n\u003cp\u003e-Inner Shaft w\/ welded quick release\u003c\/p\u003e\n\u003cp\u003e-Motion SFI Quick Release for 5\/6 bolt steering wheels\u003c\/p\u003e\n\u003cp\u003e-Split lock collar for bottom of column\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eOptional:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-Add Intermediate Steering Shaft with U joints in the options for a complete solution. Includes (1) 15\" double D shaft, (1) 3\/4 round to 3\/4 DD Ujoint and (1) 3\/4 DD to 3\/4 30 Spline for Factory Steering Box \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor steering wheel options please visit this link: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Steering Wheels\" href=\"https:\/\/www.motionraceworks.com\/collections\/steering-wheel-and-accessories\" target=\"_blank\"\u003e\u003cstrong\u003ehttps:\/\/www.motionraceworks.com\/collections\/steering-wheel-and-accessories\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eTHIS COLUMN IS FOR OFF-ROAD USE ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLearn more about U-Joints and Intermediate Steering Shafts by watching the video below!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/A0mbVBebJvo\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No I'll make my own \/ No Steering Wheel","offer_id":45182515806261,"sku":"15-280-1","price":349.99,"currency_code":"USD","in_stock":true},{"title":"No I'll make my own \/ Add MPI Motion Edition Race Steering Wheel w\/Orange Stripe (MPI-R513-MRW)","offer_id":45182515839029,"sku":"15-280-3","price":514.98,"currency_code":"USD","in_stock":true},{"title":"No I'll make my own \/ Add MPI Motion Edition Race Steering Wheel All Black (MPI-R513-BLK-MRW)","offer_id":45182515871797,"sku":"15-280-4","price":514.98,"currency_code":"USD","in_stock":true},{"title":"Add Shaft and U-Joints to Connect to Factory Steering Box (15-50016)(15-50001)(15-50002) \/ No Steering Wheel","offer_id":45182515904565,"sku":"15-280-2","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Add Shaft and U-Joints to Connect to Factory Steering Box (15-50016)(15-50001)(15-50002) \/ Add MPI Motion Edition Race Steering Wheel w\/Orange Stripe (MPI-R513-MRW)","offer_id":45182515937333,"sku":"15-280-5","price":699.98,"currency_code":"USD","in_stock":true},{"title":"Add Shaft and U-Joints to Connect to Factory Steering Box (15-50016)(15-50001)(15-50002) \/ Add MPI Motion Edition Race Steering Wheel All Black (MPI-R513-BLK-MRW)","offer_id":45182515970101,"sku":"15-280-6","price":699.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/obs-3.jpg?v=1777399866"},{"product_id":"1999-18-silverado-5x4-75-lug-pattern-medium-duty-4-piston-drag-racing-front-brake-kit-reusing-factory-modified-hubs-001-0291-1","title":"1999-18 Silverado 5x4.75 lug pattern Medium Duty 4 piston Drag Racing Front Brake Kit (Reusing Factory Modified Hubs) 001-0291-1","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1999-18 Silverado 5x4.75 lug pattern Medium Duty 4 piston Drag Racing Front Brake Kit (Reusing Factory Modified Hubs) 001-0291-1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1999-2018_Silverado_Front_Brake_Kit_6x5.5_001-0290.pdf?v=1707274922\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1999-2018_Silverado_Front_Brake_Kit_6x5.5_001-0290.pdf?v=1707274922\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstall Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease note this kit is designed to work with factory hubs which are modified and redrilled for 5x4.75\" lug pattern\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: These only work with 17\" wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit fits the following:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1999-2018 Chevy Silverado 2WD\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1999-2018 GMC Sierra 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 12.5lbs per side or 25 lbs overall. This kit saves 60 lbs over factory disc brakes (both sides).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKit includes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eF3 4 piston calipers\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-1\" title=\"F3 Caliper 1.75 DIA STAINLESS STEEL PISTON .500 RTR - 002-0192SSP-1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-1\" data-mce-fragment=\"1\"\u003e002-0192SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/copy-of-f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-2\" title=\"Copy of F3 Caliper 1.75 DIA STAINLESS STEEL PISTON .500 RTR - 002-0192SSP-2\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/copy-of-f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-2\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0192SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e#1 Standard F3 Pads\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f3-pads\" target=\"_blank\"\u003e\u003cspan face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e6-1020W\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) 12.50 x .500” thermally treated revolution rotors\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) Aluminum rotor hats 204-0226-5\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) Aluminum caliper mounting bracket 16-0266\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\" data-mce-href=\"http:\/\/www.p65warnings.ca.gov\/\" data-mce-fragment=\"1\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eInstallation of this kit will require 3AN lines that are sold separately\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-fragment=\"1\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e*Please use red Loctite on all rotor bolts*\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182524719157,"sku":"001-0291-1","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/5LugTBM.jpg?v=1777399965"},{"product_id":"1999-18-silverado-6x5-5-lug-pattern-medium-duty-4-piston-drag-racing-front-brake-kit-reusing-factory-hubs-001-0290-1","title":"1999-18 Silverado 6x5.5 lug pattern Medium Duty 4 piston Drag Racing Front Brake Kit (Reusing Factory Hubs) 001-0290-1","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1999-18 Silverado Medium Duty 4 piston Drag Racing Front Brake Kit (Reusing Factory 6x5.5 Hubs) 001-0290-1 \u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1999-2018_Silverado_Front_Brake_Kit_6x5.5_001-0290.pdf?v=1707274922\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstall Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: These only work with 17\" wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e*ABS must be enabled when using this kit*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis kit fits the following:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1999-2018 Chevy Silverado 2WD\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1999-2018 GMC Sierra 2WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 12.5lbs per side or 25 lbs overall. This kit saves 60 lbs over factory disc brakes (both sides).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eKit includes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eF3 4 piston calipers\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" title=\"F3 Caliper 1.75 DIA STAINLESS STEEL PISTON .500 RTR - 002-0192SSP-1\" href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-1\"\u003e002-0192SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" title=\"Copy of F3 Caliper 1.75 DIA STAINLESS STEEL PISTON .500 RTR - 002-0192SSP-2\" href=\"https:\/\/www.tbmbrakes.com\/products\/copy-of-f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-2\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/copy-of-f3-caliper-1-75-dia-stainless-steel-piston-500-rtr-002-0192ssp-2\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0192SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e#1 Standard F3 Pads\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f3-pads\" target=\"_blank\"\u003e\u003cspan face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e6-1020W\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) 12.50 x .500” thermally treated revolution rotors\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) Aluminum rotor hats 204-0226\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) Aluminum caliper mounting bracket 16-0266\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca data-mce-fragment=\"1\" href=\"http:\/\/www.p65warnings.ca.gov\/\" data-mce-href=\"http:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eInstallation of this kit will require 3AN lines that are sold separately\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e*Please use red Loctite on all rotor bolts*\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182524784693,"sku":"001-0290-1","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/6LugTBM_cb9d2619-a599-4e24-82a6-c6833a764ae2.jpg?v=1777399966"},{"product_id":"replacement-oil-cap-for-motion-10-120-valve-covers-10-12003","title":"Replacement Oil Cap for Motion Billet Valve Covers","description":"\u003cp\u003eReplacement Oil Cap for Motion Valve Covers\u003c\/p\u003e\n\u003cp\u003e10-120BLK\u003cbr\u003e11-120BLK\u003cbr\u003e12-120BLK\u003cbr\u003e12-121BLK\u003cbr\u003e37-110BLK\u003cbr\u003e38-110BLK \u003c\/p\u003e\n\u003cp\u003eBlack Anodized -16ORB Oil Cap with O-Ring.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*This does not fit the cast valve covers that we sold at one time* \u003c\/p\u003e\n\u003cp\u003e*If you need a bare\/gold\/clear cap please call the Sales Department*\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182582521909,"sku":"10-12003BLK","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5009_516c15ec-3688-4dee-9f3c-59f1be6c33be.jpg?v=1777400670"},{"product_id":"smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009","title":"Smart Coil IGN1A Coil Bracket Mounting Kit for Motion Billet Valve Covers 10-12009","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Coil IGN1A Coil Bracket Mounting Kit for Motion Billet Valve Covers 10-12009\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is for the Smart Coil IGN1A style coils as popularly sold by Holley (556-112), Haltech (\u003cspan\u003eHT-020114) \u003c\/span\u003e, AEM (30-2853), Megasquirt Ms3Pro, Fueltech (\u003cspan\u003e5001100012)\u003c\/span\u003e, MSD (\u003cspan\u003e8289)\u003c\/span\u003e, Firecore, and more.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Black Anodized Laser Cut Coil Brackets for mounting Smart Coil Ignition Coils (full set)\u003c\/li\u003e\n\u003cli\u003e(4) Black Billet Brackets for Mounting Coil Brackets to Valve Covers\u003c\/li\u003e\n\u003cli\u003eNecessary Stainless\u003cspan\u003e H\u003c\/span\u003eardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: NO COILS INCLUDED. Only Hardware and Mounting Brackets.**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*These will not work with our BBC valve covers*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eFor reference on which coils are compatible with which bracket, see the chart below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/IMG_9476_480x480.jpg?v=1625149168\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1_160x160.png?v=1620924451\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182582652981,"sku":"10-12009","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5696_226b0dea-735e-447d-8a9b-4e6368713ae1.jpg?v=1777400671"},{"product_id":"d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008","title":"D585 Heat Sink Coil Bracket Mounting Kit for Motion Billet Valve Covers 10-12008","description":"\u003cp\u003e\u003cstrong\u003eD585 Heat Sink Coil Bracket Mounting Kit for Motion Billet Valve Covers 10-12008\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is for the D585 (AC Delco part number) Truck heat sink style coils.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Black Anodized Laser Cut Coil Brackets for mounting D585 Ignition Coils (full set)\u003c\/li\u003e\n\u003cli\u003e(4) Black Billet Brackets for Mounting Coil Brackets to Valve Covers\u003c\/li\u003e\n\u003cli\u003eNecessary Stainless Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: NO COILS INCLUDED. Only Hardware and Mounting Brackets.**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*These will not work with our BBC valve covers*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor reference on which coils are compatible with which bracket, see the chart below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/IMG_9476_480x480.jpg?v=1625149168\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1_160x160.png?v=1620924451\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182582685749,"sku":"10-12008","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5699_2f3e93f1-f1ed-4e2e-8b37-dc78c278f3c6.jpg?v=1777400673"},{"product_id":"ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007","title":"LS Multi Coil Bracket Mounting Kit For Motion Billet Valve Covers","description":"\u003cp\u003e\u003cstrong\u003eLS Multi Coil Bracket Mounting Kit For Motion Billet Valve Covers 10-12007\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits LS1 Car, LS3, L92, and LQ4 Coil Packs. \u003c\/p\u003e\n\u003cp\u003eFor D585 and Smart Coil Brackets see other listings for PN's 10-12008 and 10-12009.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Black Anodized Flat Coil Brackets\u003c\/li\u003e\n\u003cli\u003e(4) Billet Mounts To Bolt To Valve Cover\u003c\/li\u003e\n\u003cli\u003eNecessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: NO COILS ARE INCLUDED. Brackets and Hardware only.**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*These will not work with our BBC valve covers*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eFor reference on which coils are compatible with which bracket, see the chart below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/IMG_9476_480x480.jpg?v=1625149168\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1_160x160.png?v=1620924451\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182582816821,"sku":"10-12007","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5697_0dc7ce43-8eb6-4913-8f1d-8341243f0091.jpg?v=1777400674"},{"product_id":"copy-of-motion-valve-cover-fittings-12-orb-to-12an-pair-new","title":"Motion Valve Cover Fittings -12 ORB to -12AN (Pair) 34-11212-2","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eMotion Valve Cover Fittings -12 ORB to -12AN (Pair) \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese fittings are made specifically for our Motion Raceworks Billet valve covers.  Custom Short length ORB threads allows them to work in conjunction with our internal baffling system.  These can be used in any ORB situation as well.  Come with O-rings pre installed.\u003c\/p\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182582849589,"sku":"34-11212-2","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5095_9c7aa980-eac6-40ef-81c3-c096757080ec.jpg?v=1777400675"},{"product_id":"copy-of-motion-valve-cover-fittings-12-orb-to-10an-pair-new","title":"Motion Valve Cover Fittings -12 ORB to -10AN (Pair) 34-11012-2","description":"\u003cp\u003e\u003cstrong\u003eMotion Valve Cover Fittings -12 ORB to -10AN (Pair) \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese fittings are made specifically for our Motion Raceworks Billet valve covers.  Custom Short length ORB threads allows them to work in conjunction with our internal baffling system.  These can be used in any ORB situation as well.  Come with O-rings pre installed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182582915125,"sku":"34-11012-2","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5026_19f5cc55-5565-479e-8852-6f566d1ab883.jpg?v=1777400676"},{"product_id":"motion-billet-ls-valve-covers","title":"Motion Raceworks Billet LS Valve Covers","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks Billet LS Valve Covers 10-120\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eInstallation Instructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers_1.pdf?v=1722544048\" title=\"Billet LS Valve Cover Instructions 10-120\" rel=\"noopener\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMotion billet valve covers are designed to perform and look incredible at the exact same time. These are machined from 6061 US made aluminum in house in Dewitt, IA. Retaining factory gasket design these covers seal better than any aftermarket cover on the market. With a factory style internal drip rail ledge on the lower portion of the valve cover, these will not shift and move when tightening down and resist dripping oil on exhaust when removing much like a factory cover. A high flow internal baffling creates a usable PCV system that outperforms factory and does a great job to keep oil out of the catch can at the same time. Finally, modular coil mounting holes on the top rail of the valve cover allow you to retain good looks without coils or gives the ability to add modular coil mounting options at any time with three options of coils listed below.\u003c\/p\u003e\n\u003ch3 data-start=\"1748\" data-end=\"1775\"\u003eWhy Motion Raceworks?\u003c\/h3\u003e\n\u003cp data-start=\"1776\" data-end=\"1938\"\u003eWe're racers and builders just like you. Every Motion Raceworks product is engineered with intent, tested under pressure, and trusted by top-tier teams worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBright Black Anodized Finish\u003c\/li\u003e\n\u003cli\u003eBall Milled Surface Finish \u003c\/li\u003e\n\u003cli\u003eInnovative Coil Mounting Design Adapts Nearly Every Style Coil without sacrificing looks when not running coil packs.  \u003c\/li\u003e\n\u003cli\u003eValve Cover able to be removed without unbolting coil packs\u003c\/li\u003e\n\u003cli\u003eBaffled -12ORB Breathers adaptable to 10AN and 12AN\u003c\/li\u003e\n\u003cli\u003eBillet Oil Cap (-16 ORB)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eCoil-pack mounting able to be changed at later time with A la Carte Coil Pack brackets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003e(1) Billet Oil Cap (16 ORB)\u003c\/li\u003e\n\u003cli\u003e(2) Breather Fittings (Choose 10AN or 12AN in options)\u003c\/li\u003e\n\u003cli\u003ePre-Installed Baffles\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOptional:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd LS1 Multi Fit Coil Brackets 10-12007: See reference document below for compatibility.\u003c\/li\u003e\n\u003cli\u003eAdd D585 Coil Brackets 10-12008: See reference document below for compatibility.\u003c\/li\u003e\n\u003cli\u003eAdd Smart Coil (IGN1A) Brackets 10-12009 (Also Fits MSD\/Fueltech CDI Coils): See reference document below for compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA variety of factors go into keeping coil packs on the valve cover including looks, serviceability, coil choice, clearance for fittings, header design, and more.  Whether you choose to run coils or not, this cover is perfect for you.  Featuring a top rail mounting design, if you do not wish to run coils, there are no leftover mounting bosses or holes that are unsightly or in plain view.  If you decide to run coil packs, every LS coil made as well as aftermarket coils such as Smart Coils (IGN1A), CDI can be used.  We thought of everything. To add the brackets, you simply choose the bracket options in the listing or add ala carte at a later time.  \u003c\/p\u003e\n\u003cp\u003eEvery coil bracket is adjustable and clears not only the breather fittings, but also allows for a large billet oil cap. Finally valve cover hardware to remove valve cover is accessible and usable with coils on the car.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, coil packs have been checked and will clear intakes, fuel rails, and even wide hanging superchargers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt Motion Raceworks we understand PCV and crank case pressure is unavoidable.  We also believe that filling catch cans up with oil due to poor breather design is not acceptable.  This valve cover features a long high flow breather channel which will remove excess crank case pressure, and is serviceable by removing C-Clips. Our cover was machined on the top side to receive one of our custom low profile -12 ORB fittings.  This means you can adapt to 10AN or 12AN. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Custom fittings were designed and made to allow for packaging and clearance of internal baffling, standard -12ORB fittings will not work.  Fittings Included, but also sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCoil-Pack Identifier and Links\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eD585: Heat Sink Truck Style\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Fit Brackets: LS3 L92 LS1 (F-Body) LQ4, Gen V LT\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSmart Coil IGN1A \/ CDI\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\"\u003ehttps:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Rocker Clearance: Does clear factory rocker arms, as well as TSP Roller Tip Rocker arms.  Not known to clear most aftermarket Roller Rockers.***  Does not clear shaft mounted rockers \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\" alt=\"LS Billet Valve Cover Dimensions\"\u003e\u003cbr\u003e\u003cbr\u003ePlease use dimensions to verify fitment on your project\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DV_CfG10AgA?si=MJfUQ6FVgsHWhbsR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"10AN (34-11012 (x2)) \/ None","offer_id":45182583013429,"sku":"10-120BLK-1","price":599.99,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182583046197,"sku":"10-120BLK-2","price":708.0,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182583078965,"sku":"10-120BLK-3","price":708.0,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182583111733,"sku":"10-120BLK-4","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ None","offer_id":45182583144501,"sku":"10-120BLK-5","price":599.99,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182583177269,"sku":"10-120BLK-6","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182583210037,"sku":"10-120BLK-7","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182583242805,"sku":"10-120BLK-8","price":708.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_8049.jpg?v=1777400679"},{"product_id":"motion-raceworks-billet-valve-cover-replacement-hardware-complete-set-with-oring-seals","title":"Motion Raceworks Billet Valve Cover Replacement Hardware (Complete set with Oring Seals)","description":"\u003cp\u003eReplacement Stainless M6x1.0 Hardware for Motion Raceworks Billet Valve Covers. This is a complete set of hardware (enough to do two covers).  Comes with oring seals.\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182583373877,"sku":"10-120HW","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_4997.jpg?v=1777400681"},{"product_id":"1999-07-silverado-chromoly-lightweight-steering-column-race-only","title":"1999-07 Chevrolet Silverado Chromoly Lightweight Steering Column","description":"\u003cp\u003e\u003cstrong\u003e1999-07 Silverado Chromoly Lightweight Steering Column Race Only 15-170\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e This column utilizes American made and SFI parts to create a very safe and high quality column. This column is professionally tig welded using Chromoly material for weight reduction. \u003c\/p\u003e\n\u003cp\u003eOur columns \u003cspan\u003ecome standard with Motion Raceworks 5\/6 bolt SFI approved quick release installed and welded.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAdd a MPI steering wheel or our steering shaft in the options. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e  This column uses a special U-Joint and Special shaft to connect to the factory steering box.  It does \u003cstrong\u003eNOT\u003c\/strong\u003e use a standard DD shaft.  You must select \"Add Intermediate Shaft\" unless you are fabricating an aftermarket rack and pinion to your vehicle.  \u003cstrong\u003e(Note - you will reuse your factory steering joint at steering box)\u003c\/strong\u003e.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLearn more about U-Joints and Intermediate Steering Shafts by watching the video below!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/A0mbVBebJvo\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No Steering Wheel \/ No (I Will Be Building My Own)","offer_id":45182617255989,"sku":"15-170-1","price":349.99,"currency_code":"USD","in_stock":true},{"title":"No Steering Wheel \/ Add Intermediate Shaft and U-Joint to Connect to Factory Steering Box (15-50008) (15-50018)","offer_id":45182617288757,"sku":"15-170-2","price":489.99,"currency_code":"USD","in_stock":true},{"title":"Add MPI Steering Wheel w\/ Orange Stripe MPI-R513-MRW \/ No (I Will Be Building My Own)","offer_id":45182617321525,"sku":"15-170-3","price":514.98,"currency_code":"USD","in_stock":true},{"title":"Add MPI Steering Wheel w\/ Orange Stripe MPI-R513-MRW \/ Add Intermediate Shaft and U-Joint to Connect to Factory Steering Box (15-50008) (15-50018)","offer_id":45182617354293,"sku":"15-170-4","price":639.98,"currency_code":"USD","in_stock":true},{"title":"Add MPI Steering Wheel - All Black MPI-R513-BLK-MRW \/ No (I Will Be Building My Own)","offer_id":45182617387061,"sku":"15-170-5","price":514.98,"currency_code":"USD","in_stock":true},{"title":"Add MPI Steering Wheel - All Black MPI-R513-BLK-MRW \/ Add Intermediate Shaft and U-Joint to Connect to Factory Steering Box (15-50008) (15-50018)","offer_id":45182617419829,"sku":"15-170-6","price":639.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/IMG_0388.jpg?v=1777401054"},{"product_id":"99-07-gm-full-size-truck-silverado-sierra-parachute-mount-kit","title":"1999-18 GM Silverado\/Sierra Parachute Mount 14-130","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1999-18 GM Silverado\/Sierra Parachute Mount 14-130\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eThis Motion Raceworks 1999-18 GM Silverado\/Sierra Parachute Mount is a great NHRA \u0026amp; IHRA track legal option to stop your vehicle safely, but look good while doing it. Made in the USA, we fully TIG weld a combo of DOM Chromoly Tubing and CNC Laser Formed Brackets for a strong but lightweight design. From there the mount is inspected and prepped for its standard gloss black powder coat finish to become the highest quality piece on the market!\u003cbr\u003e\u003cbr\u003eThe Frame Cross Bar is designed to bolt on to your factory frame mounts replacing the factory crash bar\/bumper support. With a cross bolt receiver design this allows for easy installation and with removal of one bolt, the Parachute Receiver Mount comes out. Then the hole can be quickly hidden with a license plate for street driving, trailering, or storage when not at the track.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eParts Included:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrame Cross Bar Mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eParachute Receiver Mount\u003c\/li\u003e\n\u003cli\u003eAll Necessary Grade 8 Hardware (some kits reuse factory hardware)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe also highly suggest picking up our Parachute Essentials Kit when ordering. This gives you a billet end cap for your cable to avoid snags that would prevent the parachute from deploying as well as a cable holder and Remove Before Flight Flag\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/motion-raceworks-parachute-essentials\" title=\"Remove Before Flight\" target=\"_blank\"\u003e\u003cspan\u003ehttps:\/\/www.motionraceworks.com\/products\/motion-raceworks-parachute-essentials\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you are interested in some optional parts with the parachute mount, please check out the links below for info or purchasing. Refer to the picture chart above for parachute sizing and specifications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOptional Parts:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-levers-mounts\/products\/billet-parachute-release-lever-cable-mount-kit\" title=\"Billet Cable Handle Release Kit\" target=\"_blank\"\u003eBillet Handle \u0026amp; Cable Release Kit\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-systems\/products\/stroud-420-comp-eliminator-parachute\" title=\"Stroud 420 Comp Eliminator Pilot Spring Parachute\" target=\"_blank\"\u003eStroud 420 Comp Eliminator Pilot Spring Parachute\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-systems\/products\/stroud-430-pro-stock-parachute\" title=\"Stroud 430 Pro Stock Pilot Spring Parachute\" target=\"_blank\"\u003eStroud 430 Pro Stock Pilot Spring Parachute\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-kits\/products\/motion-raceworks-parachute-cable-holder\" title=\"Parachute Cable Holder\" target=\"_blank\"\u003eParachute Cable Holder\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstall Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is designed to be used in conjunction with a roll pan. After removing the stock bumper and bumper brackets from your truck frame, this bolts in place of where the bumper came off. The bolts are made for locating, we suggest welding directly to the frame after installation for the most secure and safe install. After the main cross bar is installed, the parachute receiver simply bolts in right behind the license plate location with a single cross bolt for easy install and removal. This keeps your tail gate as functional as possible for those who use their trucks for more than a track only purpose.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWatch this video to learn how to cut the perfect hole through your bumper when mounting your parachute mount\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZbkN55UqKgU\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong style=\"text-align: center;\"\u003eWatch these videos and learn how to pack your Stroud Safety Parachute!\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Zlk3REH88oM\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WqB7MwwGPl8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWant to learn how to adjust the length of your parachute cable? Click here! \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/7dhOMmwD3ZM\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cem\u003eNOTE: With hardware fully tightened, w\u003c\/em\u003e\u003cem\u003ee always recommend welding the \u003c\/em\u003e\u003cem\u003eparachute mount to the vehicle for added strength and security as not to rely on only the\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e\u003cem\u003ehardwa\u003c\/em\u003e\u003cem\u003ere.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***For off-road racing use only*** \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"Motion Raceworks","offers":[{"title":"No \/ No","offer_id":45182633672757,"sku":"14-130","price":389.99,"currency_code":"USD","in_stock":true},{"title":"No \/ Add Stroud 430 Chute (430-01-05)","offer_id":45182633705525,"sku":"14-130-1","price":918.99,"currency_code":"USD","in_stock":true},{"title":"Add Billet Cable Handle Release Kit (14-020) \/ No","offer_id":45182633738293,"sku":"14-130-2","price":548.99,"currency_code":"USD","in_stock":true},{"title":"Add Billet Cable Handle Release Kit (14-020) \/ Add Stroud 430 Chute (430-01-05)","offer_id":45182633771061,"sku":"14-130-3","price":1098.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/SilveradoParachuteMount.jpg?v=1777401224"}],"url":"https:\/\/shoplegacymotorsports.com\/collections\/silverado.oembed?page=3","provider":"ShopLegacyMotorsports","version":"1.0","type":"link"}