{"title":"1993-2002 4th Gen Camaro Engine and Drivetrain","description":"","products":[{"product_id":"ls-single-stage-external-wet-sump-oiling-system-kit-1","title":"LS Single Stage External Wet Sump Oiling System Kit 56 tooth HTD (Passenger Side)","description":"\u003cp\u003eThe Fluidworks LS external oil pump is a high performance solution designed to fix the inherent issues with factory oil pumps when used in high horsepower, high demand, higher than factory RPM applications. Featuring a very durable and high flow Fluidworks spur gear single stage pump, this system will not only increase flow, but will also increase pressure with an adjustable pump regulator that can in most cases more than double your oil pressure. \u003c\/p\u003e\n\u003cp\u003eThis pump is designed to bolt to the passenger side of an LS block and work in conjunction with an ATI balancer that has a 28 tooth rear HTD drive. \u003c\/p\u003e\n\u003cp\u003eThis kit is designed to be incorporated with a pan setup for external oil pump pickup, or a modified pan with a baffled pickup tube. Note: we recommend 16AN pickup if possible to allow proper feed to pump.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBundle and Save with this kit!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis oil pump has 3 bolt\/ 3\/8\" hex drive provisions to bolt on a mechanical fuel pump or cable drive for future or current fuel pump needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e You may need to alter oiling system\/remove factory oil pump for this install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFluidworks 1.38\" Pressure Section Single stage pump w\/ Fuel Pump Drive on rear \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e5-101FP-5\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePassenger Mount billet bracket\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e-16AN Smooth Taper Inlet Fitting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e-12AN Smooth Taper Outlet Fitting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFluidworks 5-901-1 Remote Oil Filter Relocation w\/ 12AN fittings\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e56 tooth 20mm HTD Pulley\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFluidworks 12AN LS 5-90012 Block Oil Feed Fitting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e808-20 HTD \u003cspan class=\"il\"\u003eBelt\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"il\"\u003eNote: fuel pump clamp and pump not included\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLearn proper Oil Plumbing Techniques and Routing. Watch this Tech Tip Tuesday!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/cKN3G0QpIj8?si=eRKNFcsp-61IgAnj\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182390009909,"sku":"LSKIT-4","price":1359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_0741_9d40e623-ce5e-42b3-b37c-bc2a8e5d79cf.jpg?v=1777398713"},{"product_id":"ls-single-stage-external-wet-sump-oiling-system-kit","title":"LS Single Stage External Wet Sump Oiling System Kit 50 tooth HTD (Passenger Mount)","description":"\u003cp\u003eThe Fluidworks LS external oil pump is a high performance solution designed to fix the inherent issues with factory oil pumps when used in high horsepower, high demand, higher than factory RPM applications. Featuring a very durable and high flow Fluidworks spur gear single stage pump, this system will not only increase flow, but will also increase pressure with an adjustable pump regulator that can in most cases more than double your oil pressure. \u003c\/p\u003e\n\u003cp\u003eThis pump is designed to bolt to the passenger side of an LS block and work in conjunction with an ATI balancer that has a 25 tooth rear HTD drive. \u003c\/p\u003e\n\u003cp\u003eThis kit is designed to be incorporated with a pan setup for external oil pump pickup, or a modified pan with a baffled pickup tube. Note: we recommend 16AN pickup if possible to allow proper feed to pump.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBundle and Save with this kit!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis oil pump has 3 bolt\/ 3\/8\" hex drive provisions to bolt on a mechanical fuel pump or cable drive for future or current fuel pump needs.\u003c\/p\u003e\n\u003ch3\u003e\u003cem style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eBundle and Save with this kit!\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis oil pump has 3 bolt\/ 3\/8\" hex drive provisions to bolt on a mechanical fuel pump or cable drive for future or current fuel pump needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e You may need to alter oiling system\/remove factory oil pump for this install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFluidworks 1.38\" Pressure Section Single stage pump w\/ Fuel Pump Drive on rear \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e5-101FP-5\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePassenger Mount billet bracket\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e-16AN Smooth Taper Inlet Fitting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e-12AN Smooth Taper Outlet Fitting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFluidworks 5-901-1 Remote Oil Filter Relocation w\/ 12AN fittings\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e50 tooth 20mm HTD Pulley\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFluidworks 12AN LS 5-90012 Block Oil Feed Fitting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e776-20 HTD Belt\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: fuel pump clamp and fuel pump not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLearn proper Oil Plumbing Techniques and Routing. Watch this Tech Tip Tuesday!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/cKN3G0QpIj8?si=eRKNFcsp-61IgAnj\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182390108213,"sku":"LSKIT-2","price":1359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_0741_6e164036-7cab-401b-9f7d-adfecd931049.jpg?v=1777398715"},{"product_id":"motion-raceworks-steam-kit-coolant-crossover-2650-supercharger","title":"Motion Raceworks Steam Kit Coolant Crossover 2650 Supercharger","description":"\u003ch3\u003eMotion Raceworks Steam Kit Coolant Crossover 2650 Supercharger 10-10052\u003c\/h3\u003e\n\u003cp\u003eBalancing cylinder temperature in a boosted application is essential to building safe and durable tuneups.  LS engines come with 4 corner cooling capabilities, unfortunately many times they are blocked off creating \"hot\" cylinders in the rear two corners where air\/steam gets trapped.  \u003c\/p\u003e\n\u003cp\u003eMotion Raceworks Steam Kit for the 2650 Supercharger applications provides a plug and play solution.  Including all Motion made billet components, bracketry, and Fragola line\/fittings.  This kit was made for Harrop 2650 and Kong\/LSA style 2650 Superchargers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003cmeta charset=\"utf-8\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Corner Blocks (Black Anodized) - 1 Specific for driver's front clearance.\u003c\/li\u003e\n\u003cli\u003e(1) Set of Gaskets for Corner Blocks\u003c\/li\u003e\n\u003cli\u003e(1) 5 port Billet Manifold Block (Black Anodized)\u003c\/li\u003e\n\u003cli\u003e(1) CNC Laser\/Formed Aluminum Mounting Bracket (Black Anodized)\u003c\/li\u003e\n\u003cli\u003e(4) Premade Fragola Black Lines\u003c\/li\u003e\n\u003cli\u003eNecessary Fittings\u003c\/li\u003e\n\u003cli\u003eNecessary Hardware \u003c\/li\u003e\n\u003cli\u003e1 p clamp added to hold down the front line (not pictured)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDoes not work with factory plastic intake cover. Also will be extremely tight with any adaptors installed between the blower and the cylinder heads. May not fit with lid spacers either. \u003c\/p\u003e\n\u003cp\u003eWill bolt on the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLSA 2650 \u003c\/li\u003e\n\u003cli\u003eKong 2650\u003c\/li\u003e\n\u003cli\u003eHarrop 2650i\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMay fit other 2650 variants with a custom mounting bracket for 4 port block.\u003c\/p\u003e\n\u003cp\u003eLearn where to \"return\" your coolant crossover kit to by watching this video. Very Important! \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/hssDwq88rF4\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"None","offer_id":45182395580469,"sku":"10-10052","price":229.99,"currency_code":"USD","in_stock":true},{"title":"Add 36\" (412-1-1-36-BL)","offer_id":45182395613237,"sku":"10-10052-1","price":259.99,"currency_code":"USD","in_stock":true},{"title":"Add 42\" (412-1-1-42-BL)","offer_id":45182395646005,"sku":"10-10052-2","price":264.99,"currency_code":"USD","in_stock":true},{"title":"Add 48\" (412-1-1-48-BL)","offer_id":45182395678773,"sku":"10-10052-3","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/0eb6341a-993c-43a7-bd38-b273284ca3dd.jpg?v=1777398773"},{"product_id":"motion-raceworks-1-quart-xl-coolant-transmission-billet-overflow-catch-can","title":"Motion Raceworks 1 Quart XL Coolant \/ Transmission Billet Overflow Catch Can","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks Coolant \/ Transmission Billet Overflow Catch Can 32-112\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur all new billet overflow catch can setup may be used with coolant or transmission fluid. Made in the USA to solve problems in the real world of building high performance builds. We designed this catch can to be a solution for either option of coolant or transmission fluid.  \u003c\/p\u003e\n\u003cp\u003eFeaturing a top port and a bottom port.  This affords you the ability to either catch and capture over flow fluid, or catch and drain back.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatch and capture:\u003c\/strong\u003e Run fluid to top of can, use plug or petcock for bottom port to drain when full.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrainback:\u003c\/strong\u003e Run fluid to bottom of can, plug top port of catch can.  Mount can above top level of coolant reservoir or transmission.  Fluid will drain back as needed.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Top of can features mounting holes for bracket (included) as well as a weep hole for relieving pressure.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Catch Can Black Anodized\u003c\/li\u003e\n\u003cli\u003eMounting Bracket w\/ hardware\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT Plug\u003c\/li\u003e\n\u003cli\u003e1\/4\" Petcock for draining fluid\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT to 1\/4\" Push To Connect Fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCatch Can Top and Bottom Ports are both 1\/4\" NPT fitting size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1\/4\" Push To Connect plastic line click this link:  \u003c\/strong\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/black-1-4-push-to-connect-plastic-tubing-per-foot\" data-mce-fragment=\"1\"\u003ehttps:\/\/www.motionraceworks.com\/products\/black-1-4-push-to-connect-plastic-tubing-per-foot\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1\/4\" Push To Connect fitting options click this link:  \u003c\/strong\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/pages\/search-results-page?q=push+to+connect\"\u003ehttps:\/\/www.motionraceworks.com\/pages\/search-results-page?q=push+to+connect\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo Be Used As Coolant Overflow Radiator Recovery and Transmission Fluid Expansion Recovery Tank\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e Learn more about safe placement of a coolant catch can by watching this video!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Rb5JRxdPWWs\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182397513781,"sku":"32-112","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/9P4A3820_2-1_5abdc3e2-6280-454b-acbb-da28affae95c.png?v=1777398788"},{"product_id":"1-quart-motion-raceworks-top-loader-billet-internally-baffled-oil-catch-can-single-12-an-port","title":"1 Qt XL Top Loader Billet Internally Baffled Oil Catch Can ( Single 12 AN Port )","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks XL Top Loader Billet Catch Can 1 Qt ( Single 12 AN Port ) 32-111BLK\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(NOTE: DOES NOT INCLUDE ring to AN fittings unless added in options.)\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMany have seen our billet top loader catch can and love it. While our standard catch can has proven highly effective and more than adequate, for years of requests for a larger 1 qt catch can to satisfy \u003cmeta charset=\"utf-8\"\u003eSports Car Club of America (SCCA), \u003cmeta charset=\"utf-8\"\u003eNational Auto Sport Association NASA, Formula Drift, \u003cmeta charset=\"utf-8\"\u003eThunder Roadster Series (NASA) and more have beee made. So we created our XL billet catch can. This will result in the same high performance baffled catch can attributes but with larger capacity.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis catch can is the results of years of building, refining, and optimizing N\/A and Boosted combos. Featuring a dual internal baffling design, this can not only flows a high amount of air but keeps the filter and your engine bay dry from oil saturation due to poor can design.  \u003c\/p\u003e\n\u003cp\u003eOne of the shortcomings of a typical can (including our own) is fitting location, and\/or having the fittings clocked incorrectly.  This has been solved by having fittings coming out at 90°'s from the top of the can with a 180° clockable can by using our multiple bolt hole configuration top lid.  This means you can mount the can virtually anywhere in the engine bay and still have the fittings pointing in the correct orientation.  \u003c\/p\u003e\n\u003cp\u003eAll cans come bright black anodized for a beautiful and durable finish.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBillet Top\/Bottom Hat and Barrel Design\u003c\/li\u003e\n\u003cli\u003e180 degree clockable mounting\u003c\/li\u003e\n\u003cli\u003eIncluded Stainless steel mount w\/ hardware\u003c\/li\u003e\n\u003cli\u003eDual baffle internal design\u003c\/li\u003e\n\u003cli\u003eHigh Flow Made in the USA Filter\u003c\/li\u003e\n\u003cli\u003eComes with bottom petcock\u003c\/li\u003e\n\u003cli\u003eSingle -12 ORB ( O-ring ) Female Port\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 12.5\" H x 3.25\" Diameter\u003c\/p\u003e\n\u003cp\u003eThis can works great on LS1 LS2 LS3 LS6 LS7 LSA LS9 LSX engines as well as Coyote Mod Motor 4.6 5.4 Gen 3 Hemi Gen V LT1 LT4 L83 L86 and more!\u003c\/p\u003e\n\u003cp\u003eReference Sizing for Placement Considerations: Please note mount is clockable!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in our catch can? Watch this video to see more details!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_CBBxlwNVnk\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No","offer_id":45182397808693,"sku":"32-111BLK","price":219.99,"currency_code":"USD","in_stock":true},{"title":"Add -12 ORB to 12AN (34-11212)","offer_id":45182397841461,"sku":"32-111BLK-1","price":238.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/9P4A3815-1.png?v=1777398794"},{"product_id":"1-quart-top-loader-billet-internally-baffled-oil-catch-can-dual-10an-port","title":"1 Qt XL Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)","description":"\u003ch3\u003e\n\u003cstrong\u003eMotion Raceworks XL Top Loader Billet Catch Can 1 Qt \u003c\/strong\u003e\u003cstrong\u003e( Dual 10 AN Port ) 32-110BLK\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(NOTE: DOES NOT INCLUDE O-Ring to AN fittings unless added in options)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eMany have seen our billet top loader catch can and love it. While our standard catch can has proven highly effective and more than adequate, for years of requests for a larger 1 qt catch can to satisfy \u003cmeta charset=\"utf-8\"\u003eSports Car Club of America (SCCA), \u003cmeta charset=\"utf-8\"\u003eNational Auto Sport Association NASA, Formula Drift, \u003cmeta charset=\"utf-8\"\u003eThunder Roadster Series (NASA) and more have beee made. So we created our XL billet catch can. This will result in the same high performance baffled catch can attributes but with larger capacity.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis \u003cmeta charset=\"utf-8\"\u003eDual -10AN Port Catch Can is the results of years of building, refining, and optimizing N\/A and Boosted combos. Featuring a dual internal baffling design, this can not only flows a high amount of air but keeps the filter and your engine bay dry from oil saturation due as commonly seen on other catch cans and non baffled catch cans.  \u003c\/p\u003e\n\u003cp\u003eOne of the shortcomings of a typical can (including our own) is having fittings on opposing sides, and\/or having the fittings clocked incorrectly.  This has been solved by having fittings coming out at 90°'s from the top of the can with a 180° clockable can by using our multiple bolt hole configuration top lid.  This means you can mount the can virtually anywhere in the engine bay and still have the fittings pointing in the correct orientation.  \u003c\/p\u003e\n\u003cp\u003eAll cans come bright black anodized for a beautiful and durable finish.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eTop Loader Baffled Catch Can Design\u003c\/li\u003e\n\u003cli\u003eBeautiful black anodized finish\n\u003cul\u003e\n\u003cli\u003eFor other anodized colors: \u003ca title=\"Motion Top Loader Catch Can\" href=\"https:\/\/motionraceworks.com\/collections\/catch-can-pcv\"\u003eClick Here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBillet Top\/Bottom Hat and Barrel Construction\u003c\/li\u003e\n\u003cli\u003e180 degree clockable mounting\u003c\/li\u003e\n\u003cli\u003eIncluded Stainless steel mount w\/ hardware\u003c\/li\u003e\n\u003cli\u003eDual Baffle internal design\u003c\/li\u003e\n\u003cli\u003eHigh Flow Made in the USA Filter\u003c\/li\u003e\n\u003cli\u003eComes with bottom petcock for draining oil\u003c\/li\u003e\n\u003cli\u003eDual -10 O-ring ( ORB ) outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eOverall dimensions:\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e 12.5\" H x 3.25\" Diameter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eFor Complete Catch Can Kits: \u003ca href=\"https:\/\/motionraceworks.com\/collections\/catch-can-kits\" title=\"Motion catch can kits\"\u003eClick Here\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Notable Items about the Motion Top Loader Catch Can\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Top loader catch can design maximizes oil capacity thanks to the fittings being above the top of the catch can. This means that the capacity of the catch can truly represents its capacity. \u003c\/p\u003e\n\u003cp\u003eBaffling of the top loader catch can offers to knock down events to keep oil out of the filter. While extreme cases can still fill up the catch can and potentially saturate the filter, our catch can design is made to separate the oil from your crank case evacuation and remove the pressure out the top of the catch can through the filter. Many race style catch cans on the market are simply fittings into a hollow can which offers little ability for the oil to be knocked out of the air resulting in an oily filter, our catch can nearly always prevents that from happening.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOur catch can design offers amazing packaging ability as well as true usable capacity thanks to a top location fitting design. The capacity of this catch can is approximately 20oz. We have found that this offers more than adequate true oil capacity for traditional racing use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails for use and routing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis race catch can is typically designed to connect one or more valve cover(s) directly to the fittings on the top of the catch can. We recommend a baffled fitting on your valve cover to be utilized to prevent direct oil streams from valve train entering into the fittings and line which can cause excess oil in the catch can. We also typically try to refrain from connecting a catch can from a valley cover location as there is typically excess oil activity that can cause catch cans to fill up quickly with oil and offer less effective breathing as a result. While some engines have factory valley cover venting, often times the port size is not large enough for high performance engines.\u003c\/p\u003e\n\u003cp\u003eFor baffled valve cover options you can add on at home, please take a look at our selection : \u003ca href=\"https:\/\/motionraceworks.com\/collections\/valve-cover-fittings-for-pcv\" title=\"Valve Cover Fittings\" rel=\"noopener\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWe also offer a large selection of aftermarket valve covers to avoid any fabrication or modifcation : \u003ca href=\"https:\/\/motionraceworks.com\/collections\/baffled-valve-covers\" title=\"Motion Valve Covers\" rel=\"noopener\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to design this will not facilitate dual -12AN hose ends connecting to can.  We suggest any connections needing -12 run two individual cans due to demand of flow of entire system.  \u003c\/p\u003e\n\u003cp\u003eThis can works great on LS1 LS2 LS3 LS6 LS7 LSA LS9 LSX engines as well as Coyote Mod Motor 4.6 5.4 Gen 3 Hemi Gen V LT1 LT4 L83 L86 and more!\u003c\/p\u003e\n\u003cp\u003eReference Sizing for Placement Considerations: Please note mount is clockable!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in our catch can? Watch this video to see more details!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_CBBxlwNVnk\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No Fittings","offer_id":45182397906997,"sku":"32-110BLK","price":219.99,"currency_code":"USD","in_stock":true},{"title":"Add (x2) 6AN to 10 ORB Fittings (34-10610)","offer_id":45182397939765,"sku":"32-110BLK-1","price":244.99,"currency_code":"USD","in_stock":true},{"title":"Add (x2) 8AN to 10 ORB Fittings (34-10810)","offer_id":45182397972533,"sku":"32-110BLK-2","price":244.99,"currency_code":"USD","in_stock":true},{"title":"Add (x2) 10AN to 10 ORB Fittings (34-11010)","offer_id":45182398005301,"sku":"32-110BLK-3","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/9P4A3817-1_cdc522bf-3c50-425f-a97c-d6577ebfd814.png?v=1777398795"},{"product_id":"fluidworks-ls-lt-block-oil-feed-fitting-10an","title":"Fluidworks LS\/LT Block Oil Feed Fitting -10AN","description":"\u003cp\u003e\u003cstrong\u003eFluidworks LS\/LT Block Oil Feed Fitting M16 to -10AN (crush washer included)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for oil supply with an external wet sump or dry sump oil pump system. This fitting adapts your factory oil galley to a more usable AN style fitting.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM16 thread\u003c\/li\u003e\n\u003cli\u003e-10AN male thread\u003c\/li\u003e\n\u003cli\u003eAluminum crush washer seal\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eExtended length for easy access\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: this piece can be used on both the front and rear connection of an LS block by removing the factory plugs. We recommend feeding the rear port. Do not alter the internal plugs or routing when installing as it can cause pressure bleedoff and lack of oil flow. \u003c\/p\u003e\n\u003cp\u003eFor a 12AN version of this part: \u003ca href=\"https:\/\/motionraceworks.com\/products\/fluidworks-ls-lt-block-oil-feed-fitting-12an\" title=\"-12AN LS Oil Feed\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182398595125,"sku":"5-90011","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/IMG_9911-Photoroom.jpg?v=1777398802"},{"product_id":"8-orb-hex-plug-1-000-housing-5-00047","title":"FluidWorks -8ORB Hex Plug","description":"\u003cp\u003e\u003cstrong\u003eFluidWorks -8ORB Hex Plug \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-8ORB \u003c\/p\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182403084341,"sku":"5-00047BLK","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_9013_0863c94b-a0c6-4254-a276-7e15f983cc6d.jpg?v=1777398839"},{"product_id":"12-orb-hex-plug-2-000-housing-5-00044","title":"FluidWorks -12ORB Hex Plug","description":"\u003cp\u003e\u003cstrong\u003eFluidWorks -12ORB Hex Plug \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-12ORB\u003c\/p\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182403117109,"sku":"5-00044BLK","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_9013_58e27d30-a146-44c5-97d8-0f23b7768f79.jpg?v=1777398839"},{"product_id":"12an-push-in-fitting-for-factory-gm-ls-valve-cover-grommet","title":"12AN Push in Fitting for Factory GM LS Valve cover grommet","description":"\u003ch3\u003e12AN Push in Fitting for Factory GM LS Valve cover grommet Motion Raceworks\u003c\/h3\u003e\n\u003cp\u003eThis billet aluminum fitting presses into the driver side rear valve cover grommet on Gen 3 and 4 LS engines to adapt to 12AN for easy connection of PCV systems. \u003c\/p\u003e\n\u003cp\u003eMade in the USA\u003c\/p\u003e\n\u003cp\u003eIncludes grommet for use if not using in intended valve cover use\u003c\/p\u003e\n\u003c!----\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182428414005,"sku":"34-012LS","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_0979.jpg?v=1777399071"},{"product_id":"ls-oil-cap-to-12orb-male-fitting-by-fluidworks","title":"LS Billet Vented Oil Cap to -12ORB Male Fitting by Motion Raceworks","description":"\u003ch3\u003eLS Oil Cap to -12ORB Male Fitting by Motion Raceworks 34-00045\u003c\/h3\u003e\n\u003cp\u003eEasily add a PCV connection to your factory LS valve covers with this billet oil cap with machined in baffling. This screws directly into LS factory valve covers and has a -12ORB female thread. This means you can adapt up and down to whatever AN size needed to connect your catch can or breather system.\u003c\/p\u003e\n\u003cp\u003eAdd fitting in the drop down below.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No Fitting","offer_id":45182437294133,"sku":"34-00045","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Add -12ORB to 12AN Fitting (34-11212)","offer_id":45182437326901,"sku":"34-00045-2","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Add -12ORB to 10AN Fitting (34-11012)","offer_id":45182437359669,"sku":"34-00045-3","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Add -12ORB to 8AN Fitting (34-10812)","offer_id":45182437392437,"sku":"34-00045-4","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_2356_a4015c84-b89f-4334-b205-4578be1f2b1d.jpg?v=1777399156"},{"product_id":"sealed-top-loader-billet-internally-baffled-oil-catch-can-dual-10an-port","title":"Active 2 Stage Oil Separator \/ Oil Catch Can","description":"\u003ch3\u003eActive 2 Stage Oil Separator \/ Oil Catch Can (Normally Sealed Race Vent Top Loader Design)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(NOTE: DOES NOT INCLUDE O-Ring to AN fittings unless added in options)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe next generation of catch can technology has arrived! The Active 2 Stage Catch Can by Motion Raceworks. Our internally chambered and baffled top loader catch cans offer great ventilation and oil control for high horsepower performance engine combinations. \u003c\/p\u003e\n\u003cp\u003eThe Active 2 Stage Catch Can by Motion Raceworks can features a complex sealed and chambered baffling system that acts as an oil separator under normal driving where it contains oil, vacuum, and fumes. Under spirited driving the catch can opens up to breathe in similar fashion to our open element baffled catch can the let your engine breath. This catch can is ideal for naturally aspirated and boosted engines alike where they're utilized in non wide open throttle instances.\u003c\/p\u003e\n\u003cp\u003eUsability and plumbing contains all of the favorite features of the top loader catch cans with a clockable mounting style to rotate fitting orientation with the supplied bracket. This catch can also features the top loader fitting design so that line plumbing from the can runs together. This makes for easier packaging, line routing, and use in tight spaces.\u003c\/p\u003e\n\u003cp\u003eAll cans come bright black anodized for a beautiful and durable finish.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBillet Top\/Bottom Hat and Barrel Design\u003c\/li\u003e\n\u003cli\u003e180 degree clockable mounting\u003c\/li\u003e\n\u003cli\u003eIncluded Stainless steel mount w\/ hardware\u003c\/li\u003e\n\u003cli\u003eUnique internal baffling system \u003c\/li\u003e\n\u003cli\u003eHigh Flow Made in the USA Filter\u003c\/li\u003e\n\u003cli\u003eComes with bottom pet cock\u003c\/li\u003e\n\u003cli\u003eDual -10 O-ring ( ORB ) outlets\u003c\/li\u003e\n\u003cli\u003eBuilt in checkvalve on vacuum side of can\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 8.75\" H x 3.25\" Diameter\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to design this will not facilitate dual -12AN hose ends connecting to can.  We suggest any connections needing -12 run two individual cans due to demand of flow of entire system.  \u003c\/p\u003e\n\u003cp\u003eThis can works great on LS1 LS2 LS3 LS6 LS7 LSA LS9 LSX engines as well as Coyote Mod Motor 4.6 5.4 Gen 3 Hemi Gen V LT1 LT4 L83 L86 and more!\u003c\/p\u003e\n\u003cp\u003eReference Sizing for Placement Considerations: Please note mount is clockable!\u003c\/p\u003e\n\u003cp\u003eWatch us update a car from our race style catch can to this Active 2 Stage Can!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/PdHCa4C9u64?si=gANK1cKKPjKVJDl3\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eConnection References Below\u003c\/h2\u003e\n\u003ch3\u003eBoosted LS \u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/BoostedLS.jpg?v=1729605733\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eLS N\/A\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_NA_Engine.jpg?v=1729605699\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCoyote Ford N\/A\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Coyote_N_A_Diagram_Drawing.jpg?v=1729605151\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCoyote Ford Boosted\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Coyote_Boosted_Diagram_Drawing.jpg?v=1729605404\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Filter (Direct to Atmosphere)(Filter 32-10017) \/ No Fittings","offer_id":45182448304181,"sku":"32-106BLK-1","price":279.99,"currency_code":"USD","in_stock":true},{"title":"Filter (Direct to Atmosphere)(Filter 32-10017) \/ Add (x2) 6AN to 10 ORB Fittings (34-10610)","offer_id":45182448336949,"sku":"32-106BLK-2","price":306.99,"currency_code":"USD","in_stock":true},{"title":"Filter (Direct to Atmosphere)(Filter 32-10017) \/ Add (x2) 8AN to 10 ORB Fittings (34-10810)","offer_id":45182448369717,"sku":"32-106BLK-3","price":306.99,"currency_code":"USD","in_stock":true},{"title":"Filter (Direct to Atmosphere)(Filter 32-10017) \/ Add (x2) 10AN to 10 ORB Fittings (34-11010)","offer_id":45182448402485,"sku":"32-106BLK-4","price":306.99,"currency_code":"USD","in_stock":true},{"title":"Filter (Direct to Atmosphere)(Filter 32-10017) \/ Add (x2) 3\/8\" Hose Barb (34-53810)","offer_id":45182448435253,"sku":"32-106BLK-5","price":306.99,"currency_code":"USD","in_stock":true},{"title":"Filter (Direct to Atmosphere)(Filter 32-10017) \/ Add (x2) 1\/2\" Hose Barb (34-51210)","offer_id":45182448468021,"sku":"32-106BLK-6","price":306.99,"currency_code":"USD","in_stock":true},{"title":"Filter (Direct to Atmosphere)(Filter 32-10017) \/ Add (x2) 5\/8\" Hose Barb (34-55810)","offer_id":45182448500789,"sku":"32-106BLK-7","price":306.99,"currency_code":"USD","in_stock":true},{"title":"Billet Recirculating Top- x1 32-106-TS (Includes 10AN fitting 34-11012) \/ No Fittings","offer_id":45182448533557,"sku":"32-106BLK-8","price":319.99,"currency_code":"USD","in_stock":true},{"title":"Billet Recirculating Top- x1 32-106-TS (Includes 10AN fitting 34-11012) \/ Add (x2) 6AN to 10 ORB Fittings (34-10610)","offer_id":45182448566325,"sku":"32-106BLK-9","price":346.99,"currency_code":"USD","in_stock":true},{"title":"Billet Recirculating Top- x1 32-106-TS (Includes 10AN fitting 34-11012) \/ Add (x2) 8AN to 10 ORB Fittings (34-10810)","offer_id":45182448599093,"sku":"32-106BLK-10","price":346.99,"currency_code":"USD","in_stock":true},{"title":"Billet Recirculating Top- x1 32-106-TS (Includes 10AN fitting 34-11012) \/ Add (x2) 10AN to 10 ORB Fittings (34-11010)","offer_id":45182448631861,"sku":"32-106BLK-11","price":346.99,"currency_code":"USD","in_stock":true},{"title":"Billet Recirculating Top- x1 32-106-TS (Includes 10AN fitting 34-11012) \/ Add (x2) 3\/8\" Hose Barb (34-53810)","offer_id":45182448664629,"sku":"32-106BLK-12","price":346.99,"currency_code":"USD","in_stock":true},{"title":"Billet Recirculating Top- x1 32-106-TS (Includes 10AN fitting 34-11012) \/ Add (x2) 1\/2\" Hose Barb (34-51210)","offer_id":45182448697397,"sku":"32-106BLK-13","price":346.99,"currency_code":"USD","in_stock":true},{"title":"Billet Recirculating Top- x1 32-106-TS (Includes 10AN fitting 34-11012) \/ Add (x2) 5\/8\" Hose Barb (34-55810)","offer_id":45182448730165,"sku":"32-106BLK-14","price":346.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/9P4A3818-1_0980ff56-d620-412f-9025-d7b439d07956.png?v=1777399289"},{"product_id":"push-in-fitting-for-factory-gm-ls-valve-cover-grommet-motion-raceworks-34-010ls","title":"10AN Push in Fitting for Factory GM LS Valve cover grommet","description":"\u003ch3\u003e10AN Push in Fitting for Factory GM LS Valve cover grommet Motion Raceworks\u003c\/h3\u003e\n\u003cp\u003eThis billet aluminum fitting presses into the driver side rear valve cover grommet on Gen 3 and 4 LS engines to adapt to 10AN for easy connection of PCV systems. \u003c\/p\u003e\n\u003cp\u003eMade in the USA\u003c\/p\u003e\n\u003cp\u003eIncludes grommet for use if not using in intended valve cover use\u003c\/p\u003e\n\u003c!----\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182452826165,"sku":"34-010LS","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_0979_767d88ce-9cc5-4559-96ea-30a5e78b2caa.jpg?v=1777399324"},{"product_id":"fluidworks-ls-wet-sump-dry-sump-passenger-side-mounting-bracket","title":"FluidWorks LS Wet Sump \/ Dry Sump Passenger Side Mounting Bracket","description":"\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e 5-00077\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis mount is designed to provide a bolt on solution for single through five stage oil pumps to the passenger side of your LS engine block. Positioned to drive off of the rear HTD mandrel on an ATI balancer. Must be utilized with the \" Passenger LS\" mounting bracket option. \u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Mount\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182479433781,"sku":"5-00077","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_9087.png?v=1777399564"},{"product_id":"motion-raceworks-top-loader-billet-oil-catch-can-gold-anodized-single-12-an-port-32-101gld","title":"Motion Raceworks Top Loader Billet Oil Catch Can Gold Anodized ( Single 12 AN Port )","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks Top Loader Billet Catch Can Gold Anodized (Single 12 AN Port) 32-101GLD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(NOTE: DOES NOT INCLUDE ring to AN fittings unless added in options.)\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis catch can is the results of years of building, refining, and optimizing N\/A and Boosted combos. Featuring a dual internal baffling design, this can not only flows a high amount of air but keeps the filter and your engine bay dry from oil saturation due to poor can design.  \u003c\/p\u003e\n\u003cp\u003eOne of the shortcomings of a typical can (including our own) is fitting location, and\/or having the fittings clocked incorrectly.  This has been solved by having fittings coming out at 90°'s from the top of the can with a 180° clockable can by using our multiple bolt hole configuration top lid.  This means you can mount the can virtually anywhere in the engine bay and still have the fittings pointing in the correct orientation.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBillet Top\/Bottom Hat and Barrel Design\u003c\/li\u003e\n\u003cli\u003e180 degree clockable mounting\u003c\/li\u003e\n\u003cli\u003eIncluded Stainless steel mount w\/ hardware\u003c\/li\u003e\n\u003cli\u003eDual baffle internal design\u003c\/li\u003e\n\u003cli\u003eHigh Flow Made in the USA Filter\u003c\/li\u003e\n\u003cli\u003eComes with bottom petcock\u003c\/li\u003e\n\u003cli\u003eSingle -12 ORB ( O-ring ) Female Port\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 8.75\" H x 3.25\" Diameter\u003c\/p\u003e\n\u003cp\u003eThis can works great on LS1 LS2 LS3 LS6 LS7 LSA LS9 LSX engines as well as Coyote Mod Motor 4.6 5.4 Gen 3 Hemi Gen V LT1 LT4 L83 L86 and more!\u003c\/p\u003e\n\u003cp\u003eReference Sizing for Placement Considerations: Please note mount is clockable!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/32-101_Single_12AN_Catch_Can_Marketing_Drawing_1_480x480.jpg?v=1576555801\"\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in our catch can? Watch this video to see more details!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/_CBBxlwNVnk\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No","offer_id":45182482546741,"sku":"32-101GLD","price":189.99,"currency_code":"USD","in_stock":false},{"title":"Add -12 ORB to 12AN (34-11212)","offer_id":45182482579509,"sku":"32-101GLD-1","price":208.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/Catch_can_32-101gld.png?v=1777399579"},{"product_id":"motion-raceworks-top-loader-billet-oil-catch-can-gold-anodized-dual-10-an-port-32-100gld","title":"Motion Raceworks Top Loader Billet Oil Catch Can Gold Anodized ( Dual 10 AN Port )","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks Top Loader Billet Oil Catch Can ( Dual 10 AN Port ) 32-100GLD\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(NOTE: DOES NOT INCLUDE O-Ring to AN fittings unless added in options)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis catch can is the results of years of building, refining, and optimizing N\/A and Boosted combos. Featuring a dual internal baffling design, this can not only flows a high amount of air but keeps the filter and your engine bay dry from oil saturation due to poor can design.  \u003c\/p\u003e\n\u003cp\u003eOne of the shortcomings of a typical can (including our own) is having fittings on opposing sides, and\/or having the fittings clocked incorrectly.  This has been solved by having fittings coming out at 90°'s from the top of the can with a 180° clockable can by using our multiple bolt hole configuration top lid.  This means you can mount the can virtually anywhere in the engine bay and still have the fittings pointing in the correct orientation.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBillet Top\/Bottom Hat and Barrel Design\u003c\/li\u003e\n\u003cli\u003e180 degree clockable mounting\u003c\/li\u003e\n\u003cli\u003eIncluded Stainless steel mount w\/ hardware\u003c\/li\u003e\n\u003cli\u003eDual Baffle internal design\u003c\/li\u003e\n\u003cli\u003eHigh Flow Made in the USA Filter\u003c\/li\u003e\n\u003cli\u003eComes with bottom pet cock\u003c\/li\u003e\n\u003cli\u003eDual -10 O-ring ( ORB ) outlets\u003c\/li\u003e\n\u003cli\u003eGold Anodizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 8.75\" H x 3.25\" Diameter\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to design this will not facilitate dual -12AN hose ends connecting to can.  We suggest any connections needing -12 run two individual cans due to demand of flow of entire system.  \u003c\/p\u003e\n\u003cp\u003eThis can works great on LS1 LS2 LS3 LS6 LS7 LSA LS9 LSX engines as well as Coyote Mod Motor 4.6 5.4 Gen 3 Hemi Gen V LT1 LT4 L83 L86 and more!\u003c\/p\u003e\n\u003cp\u003eReference Sizing for Placement Considerations: Please note mount is clockable!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/products\/32-100_Dual_10AN_Catch_Can_Marketing_Drawing_480x480.jpg?v=1573763779\"\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in our catch can? Watch this video to see more details!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/_CBBxlwNVnk\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No Fittings","offer_id":45182482677813,"sku":"32-100GLD","price":189.99,"currency_code":"USD","in_stock":false},{"title":"Add (x2) 6AN to 10 ORB Fittings (34-10610)","offer_id":45182482710581,"sku":"32-100GLD-1","price":214.99,"currency_code":"USD","in_stock":false},{"title":"Add (x2) 8AN to 10 ORB Fittings (34-10810)","offer_id":45182482743349,"sku":"32-100GLD-2","price":214.99,"currency_code":"USD","in_stock":false},{"title":"Add (x2) 10AN to 10 ORB Fittings (34-11010)","offer_id":45182482776117,"sku":"32-100GLD-3","price":214.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/Catch_can_32-100gld.png?v=1777399581"},{"product_id":"motion-raceworks-clear-anodized-billet-ls-valve-covers-10-120clr","title":"Motion Raceworks Clear Anodized Billet LS Valve Covers","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks Clear Anodized Billet LS Valve Covers 10-120CLR *LIMITED  EDITION*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMotion Raceworks seeks to innovate their way into simplifying builds while focusing on aesthetics and overall function! These billet LS1 valve covers are a showcase and a prime example of this.   \u003c\/p\u003e\n\u003cp\u003eThe result is a valve cover that is something that can be used for a HUGE variety of builds without sacrificing looks or function. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e \u003ca title=\"Billet LS Valve Cover Instructions 10-120\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003e(1) Billet Oil Cap (16 ORB)\u003c\/li\u003e\n\u003cli\u003e(2) Breather Fittings (Choose 10AN or 12AN in options)\u003c\/li\u003e\n\u003cli\u003ePre-Installed Baffles\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOptional:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd LS1 Multi Fit Coil Brackets 10-12007: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd D585 Coil Brackets 10-12008: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd Smart Coil (IGN1A) Brackets 10-12009 (Also Fits MSD\/Fueltech CDI Coils): See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClear Anodized Finish\u003c\/li\u003e\n\u003cli\u003eInnovative Coil Mounting Design Adapts Nearly Every Style Coil without sacrificing looks when not running coil packs.  \u003c\/li\u003e\n\u003cli\u003eValve Cover able to be removed without unbolting coil packs\u003c\/li\u003e\n\u003cli\u003eBaffled -12ORB Breathers adaptable to 10AN and 12AN\u003c\/li\u003e\n\u003cli\u003eBillet Oil Cap (-16 ORB)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eCoil-pack mounting able to be changed at later time with A la Carte Coil Pack brackets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA variety of factors go into keeping coil packs on the valve cover including looks, serviceability, coil choice, clearance for fittings, header design, and more.  Whether you choose to run coils or not, this cover is perfect for you.  Featuring a top rail mounting design, if you do not wish to run coils, there are no leftover mounting bosses or holes that are unsightly or in plain view.  If you decide to run coil packs, every LS coil made as well as aftermarket coils such as Smart Coils (IGN1A), CDI can be used.  We thought of everything. To add the brackets, you simply choose the bracket options in the listing or add ala carte at a later time.  \u003c\/p\u003e\n\u003cp\u003eEvery coil bracket is adjustable and clears not only the breather fittings, but also allows for a large billet oil cap. Finally valve cover hardware to remove valve cover is accessible and usable with coils on the car.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, coil packs have been checked and will clear intakes, fuel rails, and even wide hanging superchargers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt Motion Raceworks we understand PCV and crank case pressure is unavoidable.  We also believe that filling catch cans up with oil due to poor breather design is not acceptable.  This valve cover features a long high flow breather channel which will remove excess crank case pressure, and is serviceable by removing C-Clips. Our cover was machined on the top side to receive one of our custom low profile -12 ORB fittings.  This means you can adapt to 10AN or 12AN. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Custom fittings were designed and made to allow for packaging and clearance of internal baffling, standard -12ORB fittings will not work.  Fittings Included, but also sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCoil-Pack Identifier and Links\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eD585: Heat Sink Truck Style\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\"\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003ehttps:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Fit Brackets: LS3 L92 LS1 (F-Body) LQ4, Gen V LT\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\"\u003e\u003cspan data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}'\u003ehttps:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSmart Coil IGN1A \/ CDI\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\"\u003ehttps:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Rocker Clearance: Does clear factory rocker arms, as well as TSP Roller Tip Rocker arms.  Not known to clear most aftermarket Roller Rockers.***  Does not clear shaft mounted rockers \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg data-mce-fragment=\"1\" alt=\"LS Billet Valve Cover Dimensions\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\"\u003e\u003cbr\u003e\u003cbr\u003ePlease use dimensions to verify fitment on your project\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"10AN (34-11012 (x2)) \/ None","offer_id":45182489395253,"sku":"10-120CLR-1","price":599.99,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182489428021,"sku":"10-120CLR-2","price":708.0,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182489460789,"sku":"10-120CLR-3","price":708.0,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182489493557,"sku":"10-120CLR-4","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ None","offer_id":45182489526325,"sku":"10-120CLR-5","price":599.99,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182489559093,"sku":"10-120CLR-6","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182489591861,"sku":"10-120CLR-7","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182489624629,"sku":"10-120CLR-8","price":708.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/Image_3.jpg?v=1777399645"},{"product_id":"motion-raceworks-gold-billet-ls-valve-covers-10-120gld","title":"Motion Raceworks GOLD Billet LS Valve Covers","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks GOLD Billet LS Valve Covers 10-120GLD \u003cem\u003eLIMITED EDITION\u003c\/em\u003e \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMotion Raceworks seeks to innovate their way into simplifying builds while focusing on aesthetics and overall function! These billet LS1 valve covers are a showcase and a prime example of this.   \u003c\/p\u003e\n\u003cp\u003eThe result is a valve cover that is something that can be used for a HUGE variety of builds without sacrificing looks or function. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers.pdf?v=1614972782\" title=\"Billet LS Valve Cover Instructions 10-120\" target=\"_blank\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003e(1) Billet Oil Cap (16 ORB)\u003c\/li\u003e\n\u003cli\u003e(2) Breather Fittings (Choose 10AN or 12AN in options)\u003c\/li\u003e\n\u003cli\u003ePre-Installed Baffles\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOptional:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd LS1 Multi Fit Coil Brackets 10-12007: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd D585 Coil Brackets 10-12008: See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdd Smart Coil (IGN1A) Brackets 10-12009 (Also Fits MSD\/Fueltech CDI Coils): See reference document below for compatibility.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGold Anodized Finish\u003c\/li\u003e\n\u003cli\u003eInnovative Coil Mounting Design Adapts Nearly Every Style Coil without sacrificing looks when not running coil packs.  \u003c\/li\u003e\n\u003cli\u003eValve Cover able to be removed without unbolting coil packs\u003c\/li\u003e\n\u003cli\u003eBaffled -12ORB Breathers adaptable to 10AN and 12AN\u003c\/li\u003e\n\u003cli\u003eBillet Oil Cap (-16 ORB)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eCoil-pack mounting able to be changed at later time with A la Carte Coil Pack brackets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA variety of factors go into keeping coil packs on the valve cover including looks, serviceability, coil choice, clearance for fittings, header design, and more.  Whether you choose to run coils or not, this cover is perfect for you.  Featuring a top rail mounting design, if you do not wish to run coils, there are no leftover mounting bosses or holes that are unsightly or in plain view.  If you decide to run coil packs, every LS coil made as well as aftermarket coils such as Smart Coils (IGN1A), CDI can be used.  We thought of everything. To add the brackets, you simply choose the bracket options in the listing or add ala carte at a later time.  \u003c\/p\u003e\n\u003cp\u003eEvery coil bracket is adjustable and clears not only the breather fittings, but also allows for a large billet oil cap. Finally valve cover hardware to remove valve cover is accessible and usable with coils on the car.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, coil packs have been checked and will clear intakes, fuel rails, and even wide hanging superchargers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt Motion Raceworks we understand PCV and crank case pressure is unavoidable.  We also believe that filling catch cans up with oil due to poor breather design is not acceptable.  This valve cover features a long high flow breather channel which will remove excess crank case pressure, and is serviceable by removing C-Clips. Our cover was machined on the top side to receive one of our custom low profile -12 ORB fittings.  This means you can adapt to 10AN or 12AN. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Custom fittings were designed and made to allow for packaging and clearance of internal baffling, standard -12ORB fittings will not work.  Fittings Included, but also sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCoil-Pack Identifier and Links\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eD585: Heat Sink Truck Style\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Fit Brackets: LS3 L92 LS1 (F-Body) LQ4, Gen V LT\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSmart Coil IGN1A \/ CDI\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\"\u003ehttps:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Rocker Clearance: Does clear factory rocker arms, as well as TSP Roller Tip Rocker arms.  Not known to clear most aftermarket Roller Rockers.***  Does not clear shaft mounted rockers \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\" alt=\"LS Billet Valve Cover Dimensions\"\u003e\u003cbr\u003e\u003cbr\u003ePlease use dimensions to verify fitment on your project\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"10AN (34-11012 (x2)) \/ None","offer_id":45182489952309,"sku":"10-120GLD-1","price":599.99,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182489985077,"sku":"10-120GLD-2","price":708.0,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182490017845,"sku":"10-120GLD-3","price":708.0,"currency_code":"USD","in_stock":false},{"title":"10AN (34-11012 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182490050613,"sku":"10-120GLD-4","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ None","offer_id":45182490083381,"sku":"10-120GLD-5","price":599.99,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182490116149,"sku":"10-120GLD-6","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182490148917,"sku":"10-120GLD-7","price":708.0,"currency_code":"USD","in_stock":false},{"title":"12AN (34-11212 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182490181685,"sku":"10-120GLD-8","price":708.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_8051.jpg?v=1777399650"},{"product_id":"ls-coolant-port-adapter-m12-to-1-8-npt-female-34-00038","title":"LS Coolant Port Adapter M12 to 1\/8\" NPT Female 34-00038","description":"\u003cp\u003e\u003cstrong\u003eLS Coolant Port Adapter M12 to 1\/8\" NPT Female 34-00038\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to provide adaptability of your a LS to use an 1\/8\" NPT Male accessory in the factory coolant sensor location. This can be used to adapt an 1\/8\" NPT temperature probe as found in aftermarket gauges and can also be used to measure coolant pressure. The LS engine has one of these sensor locations on each side of the engine, so you can measure temperature or pressure at the same time without adding a T to the system.\u003c\/p\u003e\n\u003cp\u003eThis adapter will fit any LS1, LS2, LS3, LS7, LS9 4.8 5.3. 5.7 6.0 6.2 or 7.0 engine\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eFactory crush washer style seal\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT female port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo add a pressure sensor to your order: \u003ca href=\"https:\/\/www.motionraceworks.com\/collections\/1-8-npt-pressure-transducers\" target=\"_blank\" title=\"Pressure Sensors\" rel=\"noopener noreferrer\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182492606517,"sku":"34-00038","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/IMG_4474.jpg?v=1777399672"},{"product_id":"motion-billet-gen-4-ls-valley-cover-10-10033race","title":"Motion Billet Gen 4 Race LS Valley Cover","description":"\u003cp\u003e\u003cstrong\u003eMotion Billet Gen 4 LS Valley Cover 10-10051\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis valley cover was designed to solve all of the needs in building a Gen 4 race engine while making it look REALLY good on top of any engine.  \u003c\/p\u003e\n\u003cp\u003eThe rear oil sensor location on this cover is modular.  Folks utilizing a factory style computer or factory style oil sensor can add the billet oil pressure block which bolts on and allows use of factory sensor.  For those wanting to use a mechanical gauge or aftermarket oil pressure sensor, simply leave the block off of the back and there are 1\/8\" NPT threads in the valley cover that allow use of gauge adapters and 1-100 psi pressure transducers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined from 6061 T6 Aluminum\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eUses factory valley cover gasket\u003c\/li\u003e\n\u003cli\u003eStainless hardware included\u003c\/li\u003e\n\u003cli\u003eUses factory gasket\u003c\/li\u003e\n\u003cli\u003eSame height as factory cast cover for intake clearance\u003c\/li\u003e\n\u003cli\u003eTrussed design weight savings\u003c\/li\u003e\n\u003cli\u003eAdd on sensor block allows you to bolt on factory oil pressure sensor without modification (factory height overall)\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT oil port built into valley cover for aftermarket sensors\u003c\/li\u003e\n\u003cli\u003eFits LS3, LS7, LSA, LS9, LSX, Dart and other Gen 4 LS blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This cover does not have provisions to block off AFM\/DOD ports in the valley. For this cover please see our other Gen 4 Valley Cover. Click \u003ca title=\"Gen 4 LS Valley Cover\" href=\"https:\/\/www.motionraceworks.com\/products\/motion-billet-gen-4-afm-delete-valley-cover-10-10033\"\u003ehttps:\/\/www.motionraceworks.com\/products\/motion-billet-gen-4-afm-delete-valley-cover-10-10033\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e No Oil Pressure Sensor Block Included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Add Factory Oil Sensor Adapter (10-10034) \/ Bare","offer_id":45182495293493,"sku":"10-10051-1","price":208.99,"currency_code":"USD","in_stock":true},{"title":"Add Factory Oil Sensor Adapter (10-10034BLK) \/ Black Anodizing","offer_id":45182495326261,"sku":"10-10051BLK-1","price":218.99,"currency_code":"USD","in_stock":true},{"title":"No \/ Bare","offer_id":45182495359029,"sku":"10-10051","price":169.0,"currency_code":"USD","in_stock":true},{"title":"No \/ Black Anodizing","offer_id":45182495391797,"sku":"10-10051BLK","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/valley-covers_0000_Layer1_ec30abd1-9327-4c32-be68-6e95fa0efe5f.jpg?v=1777399689"},{"product_id":"motion-valve-cover-fittings-12-orb-to-12an-single-34-00003s","title":"'-12AN to -12ORB Male Aluminum Fitting by Fluidworks","description":"\u003cp\u003e\u003cstrong\u003e-12AN to -12ORB Male Aluminum Fitting by Fluidworks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP\/N 34-11212\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluidworks ORB fittings feature a high taper transition for optimum flow and flow characteristics. \u003c\/p\u003e\n\u003cp\u003eMade in the USA from US 6061 Aluminum\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined in house in Dewitt, IA\u003c\/li\u003e\n\u003cli\u003e-12ORB Male \/  1 1\/16-12 (12) Male\u003c\/li\u003e\n\u003cli\u003e-12AN Male\u003c\/li\u003e\n\u003cli\u003eBlack Anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182503452725,"sku":"34-11212","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/12_orb_to_12_an-Photoroom_d80e8883-ab04-424f-a22b-485b8b2f0e5e.jpg?v=1777399752"},{"product_id":"ls-oil-port-adapter-for-aftermarket-1-8-npt-sensor-m16x1-5-to-1-8-npt-34-00037","title":"LS Oil Pressure Sensor Port Adapter for Aftermarket 1\/8\" NPT Sensor - M16x1.5 to 1\/8 NPT 34-00037","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eLS Oil Pressure Sensor Port Adapter for Aftermarket 1\/8\" NPT Sensor - M16x1.5 to 1\/8 NPT 34-00037\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to make adapting from the factory M16 thread pitch as found in Gen 3 and 4 LS engines to an 1\/8\" NPT easy so that you can run an aftermarket sensor for oil pressure to match the rest of your vehicles aftermarket sensors.\u003c\/p\u003e\n\u003cp\u003eIncluded:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack Anodized Adapter\u003c\/li\u003e\n\u003cli\u003eAluminum Crush Washer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan\u003eTo add a pressure sensor to your order: \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca title=\"Pressure Sensors\" href=\"https:\/\/www.motionraceworks.com\/collections\/1-8-npt-pressure-transducers\" target=\"_blank\" data-mce-href=\"https:\/\/www.motionraceworks.com\/collections\/1-8-npt-pressure-transducers\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182504239157,"sku":"34-00037","price":17.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_5584.jpg?v=1777399761"},{"product_id":"motion-billet-gen-4-billet-valley-cover-oil-pressure-port-10-10034","title":"Motion Billet Gen 4 Billet Valley Cover Oil Pressure Port 10-10034","description":"\u003cp\u003e\u003cstrong\u003eMotion Billet Gen 4 LS Valley Cover Oil Pressure Block 10-10034\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis valley cover was designed to solve all of the needs in building a Gen 4 race engine while making it look REALLY good on top of any engine.  \u003c\/p\u003e\n\u003cp\u003eThis valley cover utilizes factory style cover gasket as well as oil port seals to block off oil flow that would typically go to AFM components. This way you can easily obtain gaskets in the event of needing new or losing one.  Please note: blocking off these oil passages is for race vehicles only! \u003c\/p\u003e\n\u003cp\u003eThe rear oil sensor location on this cover is modular.  Folks utilizing a factory style computer or factory style oil sensor can add the billet oil pressure block which bolts on and allows use of factory sensor.  For those wanting to use a mechanical gauge or aftermarket oil pressure sensor, simply leave the block off of the back and there are 1\/8\" NPT threads in the valley cover that allow use of gauge adapters and 1-100 psi pressure transducers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined from 6061 T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eStainless hardware included\u003c\/li\u003e\n\u003cli\u003eAFM delete o-rings machined into cover (nothing further needed)\u003c\/li\u003e\n\u003cli\u003eUses factory oil port seals and gasket\u003c\/li\u003e\n\u003cli\u003eSame height as factory cast cover for intake clearance\u003c\/li\u003e\n\u003cli\u003eTrussed design weight savings\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT oil port built into valley cover for aftermarket sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e This item is for racing use only.  \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Bare","offer_id":45182505779253,"sku":"10-10034","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Black Anodized","offer_id":45182505812021,"sku":"10-10034BLK","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/image_594c4471-299d-4b1c-ac47-91b40ec0213b.jpg?v=1777399782"},{"product_id":"motion-raceworks-ls-3-5-od-overdrive-alternator-pulley","title":"Motion Raceworks LS 3.5\" OD Overdrive Alternator Pulley","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMotion Raceworks LS 3.5\" OD Overdrive Alternator Pulley\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e*Note Pictures may reflect 3\" pulley size*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory alternators can be very dependable and easy to find, which is why most of the aftermarket industry builds front drive bracketry kits around these pieces. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned to be used with LS style 6 rib LS Factory style alternators. Simply remove your factory alternator pulley with a puller and press on this alternator pulley.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNote: This is compatible with LS1, LS2, LS3, LS6, LS7, LS9 alternators. Others may be compatible as well.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMachined from 6061 Aluminum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMade in the USA!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eShims included to adjust pulley for inconsistencies in casting, spacing of factory and aftermarket brackets.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eComes with: \u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e.019 Shim\u003cbr data-mce-fragment=\"1\"\u003e.039 Shim\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease see the below chart for crank pulley size versus alternator pulley speed\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cimg data-mce-fragment=\"1\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Screen_Shot_2022-02-28_at_2.22.54_PM_1024x1024.png?v=1646076275\"\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182552571957,"sku":"10-10043","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/pulley_0003_IMG_0466_15ca1aa7-e0ab-4ae3-a858-5fa0ba2b9359.jpg?v=1777400310"},{"product_id":"motion-ls-steam-kit-for-holley-lo-ram-square-port-intake-10-10041","title":"Motion LS Steam Kit for Holley Lo-Ram Square Port Intake 10-10041","description":"\u003cp\u003e\u003cstrong\u003eMotion LS Steam Kit for Holley Lo-Ram Square Port Intake 10-10041\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMotion Raceworks steam kit for the Holley Lo-Ram is the solution to your LS1 coolant crossover\/steam kit issues facing use of the Holley Lo-Ram Intake.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBecause of how low this intake sits to the valley cover, it does not have clearance under the intake to run a proper traditional hard line steam kit coolant crossover setup. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eParts are machined from 6061 aircraft aluminum. Also utilizes top quality Fragola lines.  This kit allows you to have a high flow 4 CORNER coolant crossover with a common manifold. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThis kit will only work with Square Port versions of the Holley Lo-Ram intake\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eDo not risk premature engine failure due to blocking off rear coolant crossover\/steam ports.  These kits are recommended by nearly all aftermarket engine builders! (Fast 92 intake pictured).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e  This kit comes with a -4AN male fitting to return coolant back to your RADIATOR.  No line is included as routing and length varies depending on application.  We always suggest running the coolant crossover return line to a fitting just below the radiator cap.  This allows the pressure and air to be sent to an area just below the radiator cap, allowing the radiator cap to release pressure as intended thereby removing the steam\/pressure from the system.  Plumbing to the water pump risks reintroducing steam\/air pressure back into the system. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eKit includes the following:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(4) Corner manifolds w\/ steel AN fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) 5-Port Common Manifold\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) Nickel Coated Steel T\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e(3) Black coated Fragola lines\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e***Note: No radiator return line included. 4AN line\/fittings are available on our website.***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4AN Line: \u003ca href=\"https:\/\/www.motionraceworks.com\/products\/fragola-premium-black-nylon-race-4an-by-the-foot\"\u003e\u003cspan\u003ehttps:\/\/www.motionraceworks.com\/products\/fragola-premium-black-nylon-race-4an-by-the-foot\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4AN Straight Hose End:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/fragola-straight-hose-end\"\u003e\u003cspan\u003ehttps:\/\/www.motionraceworks.com\/products\/fragola-straight-hose-end\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4AN 90° Hose End: \u003ca href=\"https:\/\/www.motionraceworks.com\/products\/fragola-90-deg-hose-end\"\u003e\u003cspan\u003ehttps:\/\/www.motionraceworks.com\/products\/fragola-90-deg-hose-end\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstalling a Steam Kit? Watch this Video:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/HeDCiAlssis\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"None","offer_id":45182552670261,"sku":"10-10041","price":169.99,"currency_code":"USD","in_stock":true},{"title":"Add 36\" (412-1-1-36-BL)","offer_id":45182552703029,"sku":"10-10041-1","price":199.99,"currency_code":"USD","in_stock":true},{"title":"Add 42\" (412-1-1-42-BL)","offer_id":45182552735797,"sku":"10-10041-2","price":204.99,"currency_code":"USD","in_stock":true},{"title":"Add 48\" (412-1-1-48-BL)","offer_id":45182552768565,"sku":"10-10041-3","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/steamvent_7cd6f905-1caa-4f64-a261-1ec61ebab65c.jpg?v=1777400311"},{"product_id":"alternator-pulley","title":"LS 3\" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks LS 3\" OD Overdrive Alternator Pulley\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFactory alternators can be very dependable and easy to find, which is why most of the aftermarket industry builds front drive bracketry kits around these pieces. \u003c\/p\u003e\n\u003cp\u003eDesigned to be used with LS style 6 rib LS Factory style alternators. Simply remove your factory alternator pulley with a puller and press on this alternator pulley.  \u003c\/p\u003e\n\u003cp\u003eNote: This is compatible with LS1, LS2, LS3, LS6, LS7, LS9 alternators. Others may be compatible as well.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061 Aluminum\u003c\/p\u003e\n\u003cp\u003eMade in the USA!\u003c\/p\u003e\n\u003cp\u003eShims included to adjust pulley for inconsistencies in casting, spacing of factory and aftermarket brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComes with: \u003c\/strong\u003e\u003cbr\u003e.019 Shim\u003cbr\u003e.039 Shim\u003c\/p\u003e\n\u003cp\u003ePlease see the below chart for crank pulley size versus alternator pulley speed\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Motion_Alternator_Sheet_1024x1024.png?v=1636149047\" data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about alternator pulley sizes and how they affect the performance and longevity of your alternator.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/-HgIc3XU4CM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182557683765,"sku":"10-10042","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/pulley_0003_IMG_0466.jpg?v=1777400369"},{"product_id":"coolant-expansion-tank-remote-fill-billet-black-anodized-w-mount","title":"Coolant Expansion Tank \/ Remote Fill Billet Black Anodized w\/ Mount","description":"\u003cp\u003e\u003cstrong\u003eCoolant Expansion Tank \/ Remote Fill Billet Black Anodized 32-103\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: fittings are in pictures to show features but are not included unless added in the options\/purchased separately.  \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eMotion Raceworks coolant expansion tank \/ remote fill is exactly what is needed for building an effective cooling system where the radiator is remote mount or is mounted lower than the engine.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCatch Can\u003c\/li\u003e\n\u003cli\u003eMounting Bracket w\/ Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot Included\/Sold Separately:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8\" NPT fitting for overflow: \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/push-to-connect-90-1-8-npt-to-1-4-tubing\" title='1\/8\" NPT push to connect fitting' style=\"color: #2b00ff;\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional Bottom -16ORB fitting\u003c\/li\u003e\n\u003cli\u003eRadiator Cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/32-103CoolantExpansionCan_480x480.jpg?v=1689264022\"\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No Fitting","offer_id":45182560305205,"sku":"32-103","price":119.99,"currency_code":"USD","in_stock":true},{"title":"Add -12 Fitting (34-11216)","offer_id":45182560337973,"sku":"32-103-2","price":137.99,"currency_code":"USD","in_stock":true},{"title":"Add -16 Fitting (34-11616)","offer_id":45182560370741,"sku":"32-103-3","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/9P4A3812.png?v=1777400398"},{"product_id":"rife-liquid-temp-sensor-m12-x-1-5-gm-connector-52-1246-coolant-water-oil-trans-fluid-fuel","title":"M12 x 1.5 RIFE Liquid Temp Sensor GM Connector 52-1246 (Coolant, Water, Oil, Trans Fluid, Fuel)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e M12 x 1.5 RIFE Liquid Temp Sensor GM Connector 52-1246 (Coolant, Water, Oil, Trans Fluid, Fuel)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRife understands the importance of an accurate, durable, and fast acting sensor that you can count on with your EFI system. A sensor that is slow to react may cause damage to your engine or tune by delivering incorrect information based off of time and conditions which will not allow the ECU to operate its safeties or tune parameters correctly. While most aftermarket EFI sensors are re-labeled sensors from 80s and 90s factory technology when processing rates were slow and the sensors were less important. RIFE sensors are redesigned from the ground up using in house made bodies and state of the art sensor technology that you and your project can count on!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGM M12 x 1.5 threads\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRange: -20F to 300F\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses GM LS Style two wire style factory connector\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFaster Responding than traditional factory style sensors used in EFI systems\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore accurate than Factory style sensors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMating Connectors not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMating Connectors\/Kits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnector Kit:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/rife-2-pin-delphi-metri-pack-150-2-liquid-temp-sensor-connector-kit-w-flying-leads-52-2pinc-lt\" title=\"RIFE Liquid Temp Delphi Connector Kit\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFlying Lead Connector Kit:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/rife-2-pin-delphi-connector-kit-w-flying-leads-52-2pinfl\" title=\"RIFE 2 pin Delphi Liquid Temp Flying Lead Connector Kit\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*Note: Unlike most Motion Raceworks family of products, these sensors like most electronics are not 100% Made in the USA. While we diligently attempt to source all US electronic components, we have not been able to source everything domestically. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo calibrate your sensor with aftermarket ECU, please reference the following setup sheets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/RIFE-Liquid-Temp-Sensor-Calibration-Holley.pdf?v=1721134319\" title=\"Holley Liquid Temp Setup \/Calibration Sheet\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHolley\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" title=\"Fueltech Liquid Temp Setup\/Calibration Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LiquidTempCalFueltech.pdf?v=1631241670\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFueltech\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" title=\"Haltech Liquid Temp Setup\/Calibration Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LiquidTempCalHaltech.pdf?v=1631241669\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHaltech\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/RIFE-Liquid-Temp-Sensor-Instructions-MoTeC.pdf?v=1722446596\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMoTec\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003eLooking for a different size or plug style? Check out our full line of Liquid Temp Sensors \u003ca href=\"https:\/\/www.motionraceworks.com\/collections\/liquid-temp-sensors-cts\" title=\"RIFE Liquid Temp Sensors\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eHere\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RIFE","offers":[{"title":"Default Title","offer_id":45182561779765,"sku":"52-1246","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_0989.jpg?v=1777400424"},{"product_id":"rife-liquid-temp-3-8-npt-sensor-gm-connector-52-1245-coolant-water-oil-trans-fluid-fuel","title":"3\/8\" NPT RIFE Liquid Temp Sensor GM Connector 52-1245 (Coolant, Water, Oil, Trans Fluid, Fuel)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRIFE Liquid Temp Sensor 3\/8\" NPT GM Connector 52-1245 (Coolant, Water, Oil, Trans Fluid, Fuel)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRife understands the importance of an accurate, durable, and fast acting sensor that you can count on with your EFI system. A sensor that is slow to react may cause damage to your engine or tune by delivering incorrect information based off of time and conditions which will not allow the ECU to operate its safeties or tune parameters correctly. While most aftermarket EFI sensors are re-labeled sensors from 80s and 90s factory technology when processing rates were slow and the sensors were less important. RIFE sensors are redesigned from the ground up using in house made bodies and state of the art sensor technology that you and your project can count on!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3\/8\" NPT threads\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRange: -20F to 300F\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses GM LS Style two wire style factory connector\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFaster Responding than traditional factory style sensors used in EFI systems\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore accurate than Factory style sensors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMating Connectors not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMating Connectors\/Kits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnector Kit:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/rife-2-pin-delphi-metri-pack-150-2-liquid-temp-sensor-connector-kit-w-flying-leads-52-2pinc-lt\" title=\"RIFE Liquid Temp Delphi Connector Kit\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFlying Lead Connector Kit:\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/rife-2-pin-delphi-connector-kit-w-flying-leads-52-2pinfl\" title=\"RIFE 2 pin Delphi Liquid Temp Flying Lead Connector Kit\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*Note: Unlike most Motion Raceworks family of products, these sensors like most electronics are not 100% Made in the USA. While we diligently attempt to source all US electronic components, we have not been able to source everything domestically. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo calibrate your sensor with aftermarket ECU, please reference the following setup sheets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/RIFE-Liquid-Temp-Sensor-Calibration-Holley.pdf?v=1721134319\" title=\"Holley Liquid Temp Setup \/Calibration Sheet\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHolley\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" title=\"Fueltech Liquid Temp Setup\/Calibration Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LiquidTempCalFueltech.pdf?v=1631241670\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFueltech\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" title=\"Haltech Liquid Temp Setup\/Calibration Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LiquidTempCalHaltech.pdf?v=1631241669\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHaltech\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca rel=\"noopener\" title=\"MoTec Liquid Temp Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/RIFE-Liquid-Temp-Sensor-Instructions-MoTeC.pdf?v=1722446596\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMoTec\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003eLooking for a different size or plug style? Check out our full line of Liquid Temp Sensors \u003ca href=\"https:\/\/www.motionraceworks.com\/collections\/liquid-temp-sensors-cts\" title=\"RIFE Liquid Temp Sensors\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eHere\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"RIFE","offers":[{"title":"Default Title","offer_id":45182561878069,"sku":"52-1245","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/5392e6f4-75f3-467d-8e62-e3e4fb6b9d21.jpg?v=1777400425"},{"product_id":"motion-steam-kit-for-holley-lo-ram-intake-10-10040","title":"Motion LS Steam Kit for Holley Lo-Ram Cathedral Port Intake","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMotion LS Steam Kit for Holley Lo-Ram Cathedral Port Intake 10-10040\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMotion Raceworks steam kit for the Holley Lo-Ram is the solution to your LS1 coolant crossover\/steam kit issues facing use of the Holley Lo-Ram Intake.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBecause of how low this intake sits to the valley cover, it does not have clearance under the intake to run a proper traditional hard line steam kit coolant crossover setup.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eParts are machined from 6061 aircraft aluminum. Also utilizes top quality Fragola lines.  This kit allows you to have a high flow 4 CORNER coolant crossover with a common manifold. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003cstrong\u003eThis kit will only work with Cathedral versions of the Holley Lo-Ram intake\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eDo not risk premature engine failure due to blocking off rear coolant crossover\/steam ports.  These kits are recommended by nearly all aftermarket engine builders! (Fast 92 intake pictured).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e  This kit comes with a -4AN male fitting to return coolant back to your RADIATOR.  No line is included as routing and length varies depending on application.  We always suggest running the coolant crossover return line to a fitting just below the radiator cap.  This allows the pressure and air to be sent to an area just below the radiator cap, allowing the radiator cap to release pressure as intended thereby removing the steam\/pressure from the system.  Plumbing to the water pump risks reintroducing steam\/air pressure back into the system. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eKit includes the following:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(4) Corner manifolds w\/ steel AN fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) 5-Port Common Manifold\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) Nickel Coated Steel T\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e(3) Black coated Fragola lines\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e***Note: No radiator return line included. 4AN line\/fittings are available on our website.***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4AN Line: \u003ca href=\"https:\/\/www.motionraceworks.com\/products\/fragola-premium-black-nylon-race-4an-by-the-foot\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003ehttps:\/\/www.motionraceworks.com\/products\/fragola-premium-black-nylon-race-4an-by-the-foot\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4AN Straight Hose End: \u003ca href=\"https:\/\/www.motionraceworks.com\/products\/fragola-straight-hose-end\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003ehttps:\/\/www.motionraceworks.com\/products\/fragola-straight-hose-end\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4AN 90° Hose End: \u003ca href=\"https:\/\/www.motionraceworks.com\/products\/fragola-90-deg-hose-end\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003ehttps:\/\/www.motionraceworks.com\/products\/fragola-90-deg-hose-end\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstalling a Steam Kit? Watch this Video:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/HeDCiAlssis\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"None","offer_id":45182565417013,"sku":"10-10040","price":169.99,"currency_code":"USD","in_stock":true},{"title":"Add 36\" (412-1-1-36-BL)","offer_id":45182565449781,"sku":"10-10040-1","price":199.99,"currency_code":"USD","in_stock":true},{"title":"Add 42\" (412-1-1-42-BL)","offer_id":45182565482549,"sku":"10-10040-2","price":204.99,"currency_code":"USD","in_stock":true},{"title":"Add 48\" (412-1-1-48-BL)","offer_id":45182565515317,"sku":"10-10040-3","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/steamvent.jpg?v=1777400472"},{"product_id":"warspeed-v2-driver-side-alternator-only-bracket-kit","title":"Warspeed V2 Driver Side Alternator Only Bracket Kit WSA-1","description":"\u003cp\u003e\u003cstrong\u003eWarspeed V2 Driver Side Alternator Only Bracket Kit WSA-1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned and manufactured by Warspeed Industries in Australia. This bracket mounts your alternator on the driver side of your engine (iron block only, aluminum blocks without threaded hole will need to drill and tap).  This kit includes bracket, spacers, and unique offset tensioner. \u003c\/p\u003e\n\u003cp\u003eIncluded are both F-Body (Long), and Corvette (Short) spacing spacers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBelt Recommendations:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e7.480 diameter balancer:  6pk850-860\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e10% under:  6pk825\u003c\/li\u003e\n\u003cli\u003e25% under:  6pk775\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis is not designed to work with a mechanical water pump.\u003c\/span\u003e\u003c\/p\u003e","brand":"Warspeed","offers":[{"title":"Default Title","offer_id":45182571577397,"sku":"WSA-1","price":225.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/Warspeed.jpg?v=1777400554"},{"product_id":"motion-raceworks-18-tooth-htd-low-pro-mandrel-coyote-fbody-ls-ati-balancer","title":"Motion Raceworks \/ Fluidworks 18 Tooth HTD Low Pro Mandrel Coyote \/ F-Body LS ATI Balancer 27-130","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks \/ Fluidworks 18 Tooth HTD Mandrel Coyote \/ F-Body LS ATI Balancer 27-130\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDesigned specifically for these balancers (please measure your inner bore before ordering to confirm a 2.27 inches): \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF-Body \/ GTO LS Balancer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e918852\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan color=\"#FF0000\" style=\"color: #ff0000;\"\u003e\u003cspan style=\"color: #000000;\"\u003eCoyote \/ Ford\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan color=\"#FF0000\" style=\"color: #ff0000;\"\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e918047\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#FF0000\" style=\"color: #ff0000;\"\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003e918047N\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e918052\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e918053\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e918048\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e918048N\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #000000;\"\u003e918036 \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e*May work with other balancers that have not yet been confirmed.*\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003eThis should fit any ATI balancer with an internal bore of 2.27 inches.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv align=\"center\" style=\"text-align: left;\"\u003eThis 3-bolt mandrel offers a low profile mandrel for Mechanical Fuel Pumps, Cable Drives, Oil Pump Drives, Vacuum Pumps, and more!  \u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eFeaturing an 18 tooth HTD pulley, this allows for use with a small and easy to package accompanying accessory pulley.  \u003c\/p\u003e\n\u003cp\u003eIncluded in this part number are two complete sets of hardware to bolt to the ATI balancer.  One (longer) set is for use with AC pulley in the rear.  The (shorter) set is used with no rear AC pulley.  This allows for even more versatility in your accessory drives.\u003c\/p\u003e\n\u003cp\u003eSee mandrel size reference here:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/27-130_27-131_Crank_Mandrel_Marketing_Drawing_a51943c9-e274-47de-b604-62e4978b2e28.jpg?v=1739811924\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e18 tooth HTD mandrel (20mm deep)\u003c\/li\u003e\n\u003cli\u003eBlack Anodized for Beautiful Finish\u003c\/li\u003e\n\u003cli\u003eTwo complete hardware sets for use with or without AC rear pulley\u003c\/li\u003e\n\u003cli\u003e1 1\/4 front hex drive for rotating engine while installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLearn how to properly size \/ select a pulley combination for your mechanical fuel pump \/ mechanical oil pump in the video below: \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fRakMWspQbY\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182578393141,"sku":"27-130","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/new-new_0003_Layer1copy_a5ea372e-e2c9-4985-86bf-3ff848e95d85.jpg?v=1777400623"},{"product_id":"replacement-oil-cap-for-motion-10-120-valve-covers-10-12003","title":"Replacement Oil Cap for Motion Billet Valve Covers","description":"\u003cp\u003eReplacement Oil Cap for Motion Valve Covers\u003c\/p\u003e\n\u003cp\u003e10-120BLK\u003cbr\u003e11-120BLK\u003cbr\u003e12-120BLK\u003cbr\u003e12-121BLK\u003cbr\u003e37-110BLK\u003cbr\u003e38-110BLK \u003c\/p\u003e\n\u003cp\u003eBlack Anodized -16ORB Oil Cap with O-Ring.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*This does not fit the cast valve covers that we sold at one time* \u003c\/p\u003e\n\u003cp\u003e*If you need a bare\/gold\/clear cap please call the Sales Department*\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182582521909,"sku":"10-12003BLK","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5009_516c15ec-3688-4dee-9f3c-59f1be6c33be.jpg?v=1777400670"},{"product_id":"smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009","title":"Smart Coil IGN1A Coil Bracket Mounting Kit for Motion Billet Valve Covers 10-12009","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Coil IGN1A Coil Bracket Mounting Kit for Motion Billet Valve Covers 10-12009\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is for the Smart Coil IGN1A style coils as popularly sold by Holley (556-112), Haltech (\u003cspan\u003eHT-020114) \u003c\/span\u003e, AEM (30-2853), Megasquirt Ms3Pro, Fueltech (\u003cspan\u003e5001100012)\u003c\/span\u003e, MSD (\u003cspan\u003e8289)\u003c\/span\u003e, Firecore, and more.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Black Anodized Laser Cut Coil Brackets for mounting Smart Coil Ignition Coils (full set)\u003c\/li\u003e\n\u003cli\u003e(4) Black Billet Brackets for Mounting Coil Brackets to Valve Covers\u003c\/li\u003e\n\u003cli\u003eNecessary Stainless\u003cspan\u003e H\u003c\/span\u003eardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: NO COILS INCLUDED. Only Hardware and Mounting Brackets.**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*These will not work with our BBC valve covers*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eFor reference on which coils are compatible with which bracket, see the chart below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/IMG_9476_480x480.jpg?v=1625149168\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1_160x160.png?v=1620924451\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182582652981,"sku":"10-12009","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5696_226b0dea-735e-447d-8a9b-4e6368713ae1.jpg?v=1777400671"},{"product_id":"d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008","title":"D585 Heat Sink Coil Bracket Mounting Kit for Motion Billet Valve Covers 10-12008","description":"\u003cp\u003e\u003cstrong\u003eD585 Heat Sink Coil Bracket Mounting Kit for Motion Billet Valve Covers 10-12008\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is for the D585 (AC Delco part number) Truck heat sink style coils.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Black Anodized Laser Cut Coil Brackets for mounting D585 Ignition Coils (full set)\u003c\/li\u003e\n\u003cli\u003e(4) Black Billet Brackets for Mounting Coil Brackets to Valve Covers\u003c\/li\u003e\n\u003cli\u003eNecessary Stainless Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: NO COILS INCLUDED. Only Hardware and Mounting Brackets.**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*These will not work with our BBC valve covers*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor reference on which coils are compatible with which bracket, see the chart below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/IMG_9476_480x480.jpg?v=1625149168\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1_160x160.png?v=1620924451\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182582685749,"sku":"10-12008","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5699_2f3e93f1-f1ed-4e2e-8b37-dc78c278f3c6.jpg?v=1777400673"},{"product_id":"ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007","title":"LS Multi Coil Bracket Mounting Kit For Motion Billet Valve Covers","description":"\u003cp\u003e\u003cstrong\u003eLS Multi Coil Bracket Mounting Kit For Motion Billet Valve Covers 10-12007\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits LS1 Car, LS3, L92, and LQ4 Coil Packs. \u003c\/p\u003e\n\u003cp\u003eFor D585 and Smart Coil Brackets see other listings for PN's 10-12008 and 10-12009.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Black Anodized Flat Coil Brackets\u003c\/li\u003e\n\u003cli\u003e(4) Billet Mounts To Bolt To Valve Cover\u003c\/li\u003e\n\u003cli\u003eNecessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**Note: NO COILS ARE INCLUDED. Brackets and Hardware only.**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*These will not work with our BBC valve covers*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eFor reference on which coils are compatible with which bracket, see the chart below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/IMG_9476_480x480.jpg?v=1625149168\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1_160x160.png?v=1620924451\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182582816821,"sku":"10-12007","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5697_0dc7ce43-8eb6-4913-8f1d-8341243f0091.jpg?v=1777400674"},{"product_id":"copy-of-motion-valve-cover-fittings-12-orb-to-12an-pair-new","title":"Motion Valve Cover Fittings -12 ORB to -12AN (Pair) 34-11212-2","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eMotion Valve Cover Fittings -12 ORB to -12AN (Pair) \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese fittings are made specifically for our Motion Raceworks Billet valve covers.  Custom Short length ORB threads allows them to work in conjunction with our internal baffling system.  These can be used in any ORB situation as well.  Come with O-rings pre installed.\u003c\/p\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182582849589,"sku":"34-11212-2","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5095_9c7aa980-eac6-40ef-81c3-c096757080ec.jpg?v=1777400675"},{"product_id":"copy-of-motion-valve-cover-fittings-12-orb-to-10an-pair-new","title":"Motion Valve Cover Fittings -12 ORB to -10AN (Pair) 34-11012-2","description":"\u003cp\u003e\u003cstrong\u003eMotion Valve Cover Fittings -12 ORB to -10AN (Pair) \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese fittings are made specifically for our Motion Raceworks Billet valve covers.  Custom Short length ORB threads allows them to work in conjunction with our internal baffling system.  These can be used in any ORB situation as well.  Come with O-rings pre installed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fluidworks","offers":[{"title":"Default Title","offer_id":45182582915125,"sku":"34-11012-2","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5026_19f5cc55-5565-479e-8852-6f566d1ab883.jpg?v=1777400676"},{"product_id":"motion-billet-ls-valve-covers","title":"Motion Raceworks Billet LS Valve Covers","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks Billet LS Valve Covers 10-120\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eInstallation Instructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/10-120_Billet_LS_Valve_Covers_1.pdf?v=1722544048\" title=\"Billet LS Valve Cover Instructions 10-120\" rel=\"noopener\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMotion billet valve covers are designed to perform and look incredible at the exact same time. These are machined from 6061 US made aluminum in house in Dewitt, IA. Retaining factory gasket design these covers seal better than any aftermarket cover on the market. With a factory style internal drip rail ledge on the lower portion of the valve cover, these will not shift and move when tightening down and resist dripping oil on exhaust when removing much like a factory cover. A high flow internal baffling creates a usable PCV system that outperforms factory and does a great job to keep oil out of the catch can at the same time. Finally, modular coil mounting holes on the top rail of the valve cover allow you to retain good looks without coils or gives the ability to add modular coil mounting options at any time with three options of coils listed below.\u003c\/p\u003e\n\u003ch3 data-start=\"1748\" data-end=\"1775\"\u003eWhy Motion Raceworks?\u003c\/h3\u003e\n\u003cp data-start=\"1776\" data-end=\"1938\"\u003eWe're racers and builders just like you. Every Motion Raceworks product is engineered with intent, tested under pressure, and trusted by top-tier teams worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBright Black Anodized Finish\u003c\/li\u003e\n\u003cli\u003eBall Milled Surface Finish \u003c\/li\u003e\n\u003cli\u003eInnovative Coil Mounting Design Adapts Nearly Every Style Coil without sacrificing looks when not running coil packs.  \u003c\/li\u003e\n\u003cli\u003eValve Cover able to be removed without unbolting coil packs\u003c\/li\u003e\n\u003cli\u003eBaffled -12ORB Breathers adaptable to 10AN and 12AN\u003c\/li\u003e\n\u003cli\u003eBillet Oil Cap (-16 ORB)\u003c\/li\u003e\n\u003cli\u003eStainless Hardware\u003c\/li\u003e\n\u003cli\u003eReuses Factory Gaskets\u003c\/li\u003e\n\u003cli\u003eCoil-pack mounting able to be changed at later time with A la Carte Coil Pack brackets\u003c\/li\u003e\n\u003cli\u003eLocating shoulder doubles as oil rail to make sure valve covers stay in place and do not slide.  Rail also keeps oil from draining on to headers after removing valve cover.  \u003c\/li\u003e\n\u003cli\u003eCNC Designed, Made, Machined, Assembled, Coated in the USA\u003c\/li\u003e\n\u003cli\u003eFits LS1 LS2 LS3 LS6 LS7 LSA LS9 cylinder heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDriver \u0026amp; Passenger Valve Cover\u003c\/li\u003e\n\u003cli\u003e(1) Billet Oil Cap (16 ORB)\u003c\/li\u003e\n\u003cli\u003e(2) Breather Fittings (Choose 10AN or 12AN in options)\u003c\/li\u003e\n\u003cli\u003ePre-Installed Baffles\u003c\/li\u003e\n\u003cli\u003eStainless Hardware to Bolt to Head\u003c\/li\u003e\n\u003cli\u003e1 Pair OEM Valve Cover Gaskets\u003c\/li\u003e\n\u003cli\u003e1 Set Extra O-Ring Seals for Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eOptional:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd LS1 Multi Fit Coil Brackets 10-12007: See reference document below for compatibility.\u003c\/li\u003e\n\u003cli\u003eAdd D585 Coil Brackets 10-12008: See reference document below for compatibility.\u003c\/li\u003e\n\u003cli\u003eAdd Smart Coil (IGN1A) Brackets 10-12009 (Also Fits MSD\/Fueltech CDI Coils): See reference document below for compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoil-Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA variety of factors go into keeping coil packs on the valve cover including looks, serviceability, coil choice, clearance for fittings, header design, and more.  Whether you choose to run coils or not, this cover is perfect for you.  Featuring a top rail mounting design, if you do not wish to run coils, there are no leftover mounting bosses or holes that are unsightly or in plain view.  If you decide to run coil packs, every LS coil made as well as aftermarket coils such as Smart Coils (IGN1A), CDI can be used.  We thought of everything. To add the brackets, you simply choose the bracket options in the listing or add ala carte at a later time.  \u003c\/p\u003e\n\u003cp\u003eEvery coil bracket is adjustable and clears not only the breather fittings, but also allows for a large billet oil cap. Finally valve cover hardware to remove valve cover is accessible and usable with coils on the car.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, coil packs have been checked and will clear intakes, fuel rails, and even wide hanging superchargers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBreathers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt Motion Raceworks we understand PCV and crank case pressure is unavoidable.  We also believe that filling catch cans up with oil due to poor breather design is not acceptable.  This valve cover features a long high flow breather channel which will remove excess crank case pressure, and is serviceable by removing C-Clips. Our cover was machined on the top side to receive one of our custom low profile -12 ORB fittings.  This means you can adapt to 10AN or 12AN. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Custom fittings were designed and made to allow for packaging and clearance of internal baffling, standard -12ORB fittings will not work.  Fittings Included, but also sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCoil-Pack Identifier and Links\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eD585: Heat Sink Truck Style\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/d585-heat-sink-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12008\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMulti Fit Brackets: LS3 L92 LS1 (F-Body) LQ4, Gen V LT\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"10-12007\"}' data-sheets-userformat='{\"2\":513,\"3\":{\"1\":0},\"12\":0}'\u003ehttps:\/\/www.motionraceworks.com\/products\/ls-multi-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12007\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSmart Coil IGN1A \/ CDI\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\"\u003ehttps:\/\/www.motionraceworks.com\/products\/smart-coil-ign1a-coil-bracket-mounting-kit-for-motion-billet-valve-covers-10-12009\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***Rocker Clearance: Does clear factory rocker arms, as well as TSP Roller Tip Rocker arms.  Not known to clear most aftermarket Roller Rockers.***  Does not clear shaft mounted rockers \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/LS_Billet_Valve_Cover_Dimensions_Drawing_1024x1024.png?v=1634093952\" alt=\"LS Billet Valve Cover Dimensions\"\u003e\u003cbr\u003e\u003cbr\u003ePlease use dimensions to verify fitment on your project\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DV_CfG10AgA?si=MJfUQ6FVgsHWhbsR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"10AN (34-11012 (x2)) \/ None","offer_id":45182583013429,"sku":"10-120BLK-1","price":599.99,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182583046197,"sku":"10-120BLK-2","price":708.0,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182583078965,"sku":"10-120BLK-3","price":708.0,"currency_code":"USD","in_stock":true},{"title":"10AN (34-11012 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182583111733,"sku":"10-120BLK-4","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ None","offer_id":45182583144501,"sku":"10-120BLK-5","price":599.99,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add D585 Coil Brackets (10-12008)","offer_id":45182583177269,"sku":"10-120BLK-6","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add LS1 Multi Fit Coil Brackets (10-12007)","offer_id":45182583210037,"sku":"10-120BLK-7","price":708.0,"currency_code":"USD","in_stock":true},{"title":"12AN (34-11212 (x2)) \/ Add Smart Coil Brackets (10-12009)","offer_id":45182583242805,"sku":"10-120BLK-8","price":708.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_8049.jpg?v=1777400679"},{"product_id":"motion-raceworks-billet-valve-cover-replacement-hardware-complete-set-with-oring-seals","title":"Motion Raceworks Billet Valve Cover Replacement Hardware (Complete set with Oring Seals)","description":"\u003cp\u003eReplacement Stainless M6x1.0 Hardware for Motion Raceworks Billet Valve Covers. This is a complete set of hardware (enough to do two covers).  Comes with oring seals.\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182583373877,"sku":"10-120HW","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_4997.jpg?v=1777400681"},{"product_id":"motion-billet-gen-4-afm-delete-billet-valley-cover-black-anodized-10-10033blk","title":"Motion Billet Gen 4 Billet Valley Cover (Black Anodized) 10-10033BLK","description":"\u003cp\u003e\u003cstrong\u003eMotion Billet Gen 4 LS Valley Cover 10-10033BLK - Black Anodized (No longer two tone finish)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis valley cover was designed to solve all of the needs in building a Gen 4 race engine while making it look REALLY good on top of any engine.  \u003c\/p\u003e\n\u003cp\u003eThis valley cover utilizes factory style cover gasket as well as oil port seals to block off oil flow that would typically go to AFM components. This way you can easily obtain gaskets in the event of needing new or losing one.  Please note: blocking off these oil passages is for race vehicles only! \u003c\/p\u003e\n\u003cp\u003eThe rear oil sensor location on this cover is modular.  Folks utilizing a factory style computer or factory style oil sensor can add the billet oil pressure block which bolts on and allows use of factory sensor.  For those wanting to use a mechanical gauge or aftermarket oil pressure sensor, simply leave the block off of the back and there are 1\/8\" NPT threads in the valley cover that allow use of gauge adapters and 1-100 psi pressure transducers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined from 6061 T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eStainless hardware included\u003c\/li\u003e\n\u003cli\u003eAFM delete o-rings machined into cover (nothing further needed)\u003c\/li\u003e\n\u003cli\u003eUses factory oil port seals and gasket\u003c\/li\u003e\n\u003cli\u003eSame height as factory cast cover for intake clearance\u003c\/li\u003e\n\u003cli\u003eTrussed design weight savings\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT oil port built into valley cover for aftermarket sensors\u003c\/li\u003e\n\u003cli\u003eFits LS3, LS7, LSA, LS9, LSX, Dart and other Gen 4 LS blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e This item is for racing use only.  \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Add Factory Oil Sensor Adapter (10-10034BLK)","offer_id":45182589403189,"sku":"10-10033BLK-1","price":208.99,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":45182589435957,"sku":"10-10033BLK","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/valley-covers.jpg?v=1777400736"},{"product_id":"motion-raceworks-gen-3-ls-billet-valley-cover-knock-sensor-delete-black-anodized","title":"Motion Raceworks Gen 3 LS Billet Valley Cover (Knock Sensor Delete) Black Anodized 10-10011BLK","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks Gen 3 LS Billet Valley Cover (Knock Sensor Delete) 10-10011BLK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unsightly stock valley cover with knock sensor provisions is often the first thing folks throw away.  Because most folks turn off knock sensors when modifying their Gen 3 LS engines due to detecting false knock and other tuning inaccuracies.  We made this knock sensor delete plate. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCNC Machined in the USA in house at Motion Raceworks from a block of 6061 Aluminum, this cover accomplishes the above goal and looks good doing it.  \u003c\/p\u003e\n\u003cp\u003eA good way to verify your engine is a Gen 3 engine. Locate the factory cover and look for the \"V shape\" cutout in the back, or make sure your engine comes equipped with a rear camshaft sensor as opposed to one in the front timing cover.  \u003c\/p\u003e\n\u003cp\u003eGen 3 engines were typically used from 97-04 in 4.8, 5.3 ,5.7 and 6.0 engines LS version engines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGen 3 Valley Cover \u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182589534261,"sku":"10-10011BLK","price":149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/vallcover1.jpg?v=1777400737"},{"product_id":"motion-billet-gen-4-afm-delete-valley-cover-10-10033","title":"Motion Billet Gen 4 LS Valley Cover - 10-10033","description":"\u003cp\u003e\u003cstrong\u003eMotion Billet Gen 4 LS Valley Cover 10-10033\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis valley cover was designed to solve all of the needs in building a Gen 4 race engine while making it look REALLY good on top of any engine.  \u003c\/p\u003e\n\u003cp\u003eThis valley cover utilizes factory style cover gasket as well as oil port seals to block off oil flow that would typically go to AFM components. This way you can easily obtain gaskets in the event of needing new or losing one. Please note: blocking off these oil passages is for race vehicles only! \u003c\/p\u003e\n\u003cp\u003eThe rear oil sensor location on this cover is modular.  Folks utilizing a factory style computer or factory style oil sensor can add the billet oil pressure block which bolts on and allows use of factory sensor.  For those wanting to use a mechanical gauge or aftermarket oil pressure sensor, simply leave the block off of the back and there are 1\/8\" NPT threads in the valley cover that allow use of gauge adapters and 1-100 psi pressure transducers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined from 6061 T6 Aluminum\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eStainless hardware included\u003c\/li\u003e\n\u003cli\u003eAFM delete o-rings machined into cover (nothing further needed)\u003c\/li\u003e\n\u003cli\u003eUses factory oil port seals and gasket\u003c\/li\u003e\n\u003cli\u003eSame height as factory cast cover for intake clearance\u003c\/li\u003e\n\u003cli\u003eTrussed design weight savings\u003c\/li\u003e\n\u003cli\u003eAdd on sensor block allows you to bolt on factory oil pressure sensor without modification (factory height overall)\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT oil port built into valley cover for aftermarket sensors\u003c\/li\u003e\n\u003cli\u003eFits LS3, LS7, LSA, LS9, LSX, Dart and other Gen 4 LS blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e No Oil Pressure Sensor Block Included\u003c\/p\u003e\n\u003cp\u003eThis item is for racing use only.  \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Add Factory Oil Sensor Adapter (10-10034)","offer_id":45182590484533,"sku":"10-10033-1","price":193.99,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":45182590517301,"sku":"10-10033","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/valley-covers_0000_Layer1.jpg?v=1777400751"},{"product_id":"motion-raceworks-top-loader-billet-catch-can-single-12-an-port-32-103","title":"Motion Raceworks Top Loader Billet Internally Baffled Oil Catch Can ( Single 12 AN Port )","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks Top Loader Billet Catch Can ( Single 12 AN Port ) 32-101BLK\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(NOTE: DOES NOT INCLUDE ring to AN fittings unless added in options.)\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis catch can is the results of years of building, refining, and optimizing N\/A and Boosted combos. Featuring a dual internal baffling design, this can not only flows a high amount of air but keeps the filter and your engine bay dry from oil saturation due to poor can design.  \u003c\/p\u003e\n\u003cp\u003eOne of the shortcomings of a typical can (including our own) is fitting location, and\/or having the fittings clocked incorrectly.  This has been solved by having fittings coming out at 90°'s from the top of the can with a 180° clockable can by using our multiple bolt hole configuration top lid.  This means you can mount the can virtually anywhere in the engine bay and still have the fittings pointing in the correct orientation.  \u003c\/p\u003e\n\u003cp\u003eAll cans come bright black anodized for a beautiful and durable finish.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBillet Top\/Bottom Hat and Barrel Design\u003c\/li\u003e\n\u003cli\u003e180 degree clockable mounting\u003c\/li\u003e\n\u003cli\u003eIncluded Stainless steel mount w\/ hardware\u003c\/li\u003e\n\u003cli\u003eDual baffle internal design\u003c\/li\u003e\n\u003cli\u003eHigh Flow Made in the USA Filter\u003c\/li\u003e\n\u003cli\u003eComes with bottom petcock\u003c\/li\u003e\n\u003cli\u003eSingle -12 ORB ( O-ring ) Female Port\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 8.75\" H x 3.25\" Diameter\u003c\/p\u003e\n\u003cp\u003eThis can works great on LS1 LS2 LS3 LS6 LS7 LSA LS9 LSX engines as well as Coyote Mod Motor 4.6 5.4 Gen 3 Hemi Gen V LT1 LT4 L83 L86 and more!\u003c\/p\u003e\n\u003cp\u003eReference Sizing for Placement Considerations: Please note mount is clockable!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/32-101_Single_12AN_Catch_Can_Marketing_Drawing_1_480x480.jpg?v=1576555801\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in our catch can? Watch this video to see more details!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_CBBxlwNVnk\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No","offer_id":45182591139893,"sku":"32-101BLK","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Add -12 ORB to 12AN (34-11212)","offer_id":45182591172661,"sku":"32-101BLK-1","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/9P4A3810-1_5a8fce01-8875-4b7a-96cb-2b32044d51de.png?v=1777400758"},{"product_id":"motion-raceworks-coolant-transmission-billet-overflow-catch-can-32-102","title":"Motion Raceworks Coolant \/ Transmission Billet Overflow Catch Can","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks Coolant \/ Transmission Billet Overflow Catch Can 32-102\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur all new billet overflow catch can setup may be used with coolant or transmission fluid. Made in the USA to solve problems in the real world of building high performance builds. We designed this catch can to be a solution for either option of coolant or transmission fluid.  \u003c\/p\u003e\n\u003cp\u003eFeaturing a top port and a bottom port.  This affords you the ability to either catch and capture over flow fluid, or catch and drain back.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCatch and capture:\u003c\/strong\u003e Run fluid to top of can, use plug or petcock for bottom port to drain when full.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrainback:\u003c\/strong\u003e Run fluid to bottom of can, plug top port of catch can.  Mount can above top level of coolant reservoir or transmission.  Fluid will drain back as needed.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Top of can features mounting holes for bracket (included) as well as a weep hole for relieving pressure.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Catch Can Black Anodized\u003c\/li\u003e\n\u003cli\u003eMounting Bracket w\/ hardware\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT Plug\u003c\/li\u003e\n\u003cli\u003e1\/4\" Pet cock for draining fluid\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT to 1\/4\" Push To Connect Fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCatch Can Top and Bottom Ports are both 1\/4\" NPT fitting size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1\/4\" Push To Connect plastic line click this link:  \u003c\/strong\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.motionraceworks.com\/products\/black-1-4-push-to-connect-plastic-tubing-per-foot\" data-mce-href=\"https:\/\/www.motionraceworks.com\/products\/black-1-4-push-to-connect-plastic-tubing-per-foot\"\u003ehttps:\/\/www.motionraceworks.com\/products\/black-1-4-push-to-connect-plastic-tubing-per-foot\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor 1\/4\" Push To Connect fitting options click this link:  \u003c\/strong\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/pages\/search-results-page?q=push+to+connect\"\u003ehttps:\/\/www.motionraceworks.com\/pages\/search-results-page?q=push+to+connect\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTo Be Used As Coolant Overflow Radiator Recovery and Transmission Fluid Expansion Recovery Tank\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e Learn more about safe placement of a coolant catch can by watching this video!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Rb5JRxdPWWs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182591303733,"sku":"32-102","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/9P4A3814-1_1f687020-c060-47af-8420-fd3c8adcbdf9.png?v=1777400760"},{"product_id":"ls-adjustable-timing-pointer-kit-truck-5th-gen-camaro-spacing-10-11004","title":"LS Adjustable Timing Pointer Kit (Truck \/ 5th Gen Camaro Spacing) 10-11004","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eLS Adjustable Timing Pointer Kit (Truck \/ 5th Gen Camaro Spacing) 10-11004\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMotion Raceworks Timing Pointers make quick and easy work of adding a timing pointer to your LS engine. It is always a good idea to verify timing prior to tuning or starting your engine up on a new build. Machining tolerances and installation errors can make timing checks crucial and very valuable info for a tuner.\u003cbr\u003e\u003cbr\u003eWe positioned the adjustable timing pointer into an area clear or any accessories and in an optimal spot for setting timing in or out of the car. It also allows for easy installation of your balancer. The timing point itself has a slotted adjustment to precisely dial in your timing.\u003cbr\u003e\u003cbr\u003eThis timing pointer will work with any of the following LS engines (LS1 LS2 LS3 LS6 LS7 LS9 LSA 4.8 5.3 5.7 6.0 6.2 7.0) used with the corresponding crank balancer spacing noted in the title. We did not change height of pointer for different diameter balancer options, they are setup for standard diameter (non underdrive). To Keep costs down this is only available in raw finish.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eParts Included:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eMain Bracket\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBillet Spacers \u0026amp; Hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTiming Pointer for Truck \/ 5th Gen Camaro spacing ATI Balancer \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstall Instructions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003eFor Install instructions on Setting Timing Reference this Document: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Setting_TDC_on_a_Balancer.pdf?v=1585062801\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e\u003cspan\u003eClick Here\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWant to learn how to set TDC and check timing on an LS engine? Watch this video!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5z4hLYPkNPQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cem\u003e\u003cbr\u003eNOTE: Image may show timing pointer\/balancer of different spacing.\u003c\/em\u003e\u003c\/div\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182591336501,"sku":"10-11004","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/IMG_6154_28e861a4-6777-4ace-ac93-36bc488d33d0.jpg?v=1777400760"},{"product_id":"ls-adjustable-timing-pointer-kit-f-body-gto-spacing-10-11003","title":"LS Adjustable Timing Pointer Kit (F Body \/ GTO Spacing) 10-11003","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eLS Adjustable Timing Pointer Kit (F Body \/ GTO Spacing) 10-11003\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eMotion Raceworks Timing Pointers make quick and easy work of adding a timing pointer to your LS engine. It is always a good idea to verify timing prior to tuning or starting your engine up on a new build. Machining tolerances and installation errors can make timing checks crucial and very valuable info for a tuner.\u003cbr\u003e\u003cbr\u003eWe positioned the adjustable timing pointer into an area clear or any accessories and in an optimal spot for setting timing in or out of the car. It also allows for easy installation of your balancer. The timing point itself has a slotted adjustment to precisely dial in your timing.\u003cbr\u003e\u003cbr\u003eThis timing pointer will work with any of the following LS engines (LS1 LS2 LS3 LS6 LS7 LS9 LSA 4.8 5.3 5.7 6.0 6.2 7.0) used with the corresponding crank balancer spacing noted in the title. We did not change height of pointer for different diameter balancer options, they are setup for standard diameter (non underdrive). To Keep costs down this is only available in raw finish.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eParts Included:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003e\n\u003cspan\u003eMain Bracket\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBillet Spacers \u0026amp; Hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTiming Pointer for F-Body spacing ATI Balancer \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e**** Does not fit G8 alternator bracket without modification \u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstall Instructions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003eFor Install instructions on Setting Timing Reference this Document: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Setting_TDC_on_a_Balancer.pdf?v=1585062801\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eClick Here\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWant to learn how to set TDC and check timing on an LS engine? Watch this video!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5z4hLYPkNPQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cem\u003e\u003cbr\u003eNOTE: Image may show timing pointer\/balancer of different spacing.\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182591434805,"sku":"10-11003","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/IMG_6154_1e044196-ddd4-4588-99e7-a088cfa0a84e.jpg?v=1777400762"},{"product_id":"ls-adjustable-timing-pointer-kit-corvette-spacing-10-11002","title":"LS Adjustable Timing Pointer Kit (Corvette Spacing) 10-11002","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eLS Adjustable Timing Pointer Kit (Corvette Spacing) 10-11002\u003c\/strong\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eMotion Raceworks Timing Pointers make quick and easy work of adding a timing pointer to your LS engine. It is always a good idea to verify timing prior to tuning or starting your engine up on a new build. Machining tolerances and installation errors can make timing checks crucial and very valuable info for a tuner.\u003cbr\u003e\u003cbr\u003eWe positioned the adjustable timing pointer into an area clear or any accessories and in an optimal spot for setting timing in or out of the car. It also allows for easy installation of your balancer. The timing point itself has a slotted adjustment to precisely dial in your timing.\u003cbr\u003e\u003cbr\u003eThis timing pointer will work with any of the following LS engines (LS1 LS2 LS3 LS6 LS7 LS9 LSA 4.8 5.3 5.7 6.0 6.2 7.0) used with the corresponding crank balancer spacing noted in the title. We did not change height of pointer for different diameter balancer options, they are setup for standard diameter (non underdrive). To Keep costs down this is only available in raw finish.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eParts Included:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eMain Bracket\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBillet Spacers \u0026amp; Hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTiming Pointer for Corvette spacing ATI Balancer \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstall Instructions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003eFor Install instructions on Setting Timing Reference this Document: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/Setting_TDC_on_a_Balancer.pdf?v=1585062801\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e\u003cspan\u003eClick Here\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWant to learn how to set TDC and check timing on an LS engine? Watch this video!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5z4hLYPkNPQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cem\u003e\u003cbr\u003eNOTE: Image may show timing pointer\/balancer of different spacing.\u003c\/em\u003e\u003c\/div\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182591533109,"sku":"10-11002","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/IMG_6154.jpg?v=1777400764"},{"product_id":"motion-raceworks-top-loader-billet-catch-can-kit-32-100k","title":"Motion Raceworks Top Loader Billet Catch Can Kit","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks Top Loader Billet Catch Can Kit 32-100K\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis Kit contains the following items:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Billet Dual Port Catch Can\u003c\/li\u003e\n\u003cli\u003e(2) 10 O-ring to 10 AN Adapter Fittings to screw into can \u003c\/li\u003e\n\u003cli\u003e(2) Straight 10 AN Hose Ends (Fragola)\u003c\/li\u003e\n\u003cli\u003e(2) 90° 10 AN Hose Ends (Fragola)\u003c\/li\u003e\n\u003cli\u003e(2) 10 AN Aluminum Weld Bungs (Motion)\u003c\/li\u003e\n\u003cli\u003eApproximately 6 Feet of 10 AN Black Braided Nylon Hose (Fragola)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis catch can is the results of years of building, refining, and optimizing N\/A and Boosted combos. Featuring a dual internal baffling design, this can not only flows a high amount of air but keeps the filter and your engine bay dry from oil saturation due to poor can design.  \u003c\/p\u003e\n\u003cp\u003eOne of the shortcomings of a typical can (including our own) is having fittings on opposing sides, and\/or having the fittings clocked incorrectly.  This has been solved by having fittings coming out at 90°'s from the top of the can with a 180° clockable can by using our multiple bolt hole configuration top lid.  This means you can mount the can virtually anywhere in the engine bay and still have the fittings pointing in the correct orientation.  \u003c\/p\u003e\n\u003cp\u003eAll cans come bright black anodized for a beautiful and durable finish.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBillet Top\/Bottom Hat and Barrel Design\u003c\/li\u003e\n\u003cli\u003e180° clockable mounting\u003c\/li\u003e\n\u003cli\u003eIncluded zinc coated steel mount w\/ hardware\u003c\/li\u003e\n\u003cli\u003eDual baffle internal design\u003c\/li\u003e\n\u003cli\u003eHigh Flow Made in the USA Filter\u003c\/li\u003e\n\u003cli\u003eComes with bottom pet cock\u003c\/li\u003e\n\u003cli\u003eDual -10 O-ring ( ORB ) outlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to design this will not facilitate dual -12AN hose ends connecting to can.  We suggest any connections needing -12 run two individual cans due to demand of flow of entire system.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis can works great on LS1 LS2 LS3 LS6 LS7 LSA LS9 LSX engines as well as Coyote Mod Motor 4.6 5.4 Gen 3 Hemi Gen V LT1 LT4 L83 L86 and more!\u003c\/p\u003e\n\u003cp\u003eReference Sizing Chart for Catch Can: Please note that catch can is \"clockable\" in mounting.  \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/products\/32-100_Dual_10AN_Catch_Can_Marketing_Drawing_480x480.jpg?v=1573763779\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eFor more info on our Billet Top Loader Catch Can watch this video\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_CBBxlwNVnk\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182592286773,"sku":"32-100K","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_5127.jpg?v=1777400774"},{"product_id":"motion-raceworks-billet-dual-port-catch-can-dual-10-an","title":"Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)","description":"\u003ch3\u003e\u003cstrong\u003eMotion Raceworks Top Loader Billet Oil Catch Can ( Dual 10 AN Port ) 32-100\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(NOTE: DOES NOT INCLUDE O-Ring to AN fittings unless added in options)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis \u003cmeta charset=\"utf-8\"\u003eDual -10AN Port Catch Can is the results of years of building, refining, and optimizing N\/A and Boosted combos. Featuring a dual internal baffling design, this can not only flows a high amount of air but keeps the filter and your engine bay dry from oil saturation due as commonly seen on other catch cans and non baffled catch cans.  \u003c\/p\u003e\n\u003cp\u003eOne of the shortcomings of a typical can (including our own) is having fittings on opposing sides, and\/or having the fittings clocked incorrectly.  This has been solved by having fittings coming out at 90°'s from the top of the can with a 180° clockable can by using our multiple bolt hole configuration top lid.  This means you can mount the can virtually anywhere in the engine bay and still have the fittings pointing in the correct orientation.  \u003c\/p\u003e\n\u003cp\u003eAll cans come bright black anodized for a beautiful and durable finish.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eTop Loader Baffled Catch Can Design\u003c\/li\u003e\n\u003cli\u003eBeautiful black anodized finish\n\u003cul\u003e\n\u003cli\u003eFor other anodized colors: \u003ca href=\"https:\/\/motionraceworks.com\/collections\/catch-can-pcv\" title=\"Motion Top Loader Catch Can\"\u003eClick Here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e100% Made in the USA\u003c\/li\u003e\n\u003cli\u003eBillet Top\/Bottom Hat and Barrel Construction\u003c\/li\u003e\n\u003cli\u003e180 degree clockable mounting\u003c\/li\u003e\n\u003cli\u003eIncluded Stainless steel mount w\/ hardware\u003c\/li\u003e\n\u003cli\u003eDual Baffle internal design\u003c\/li\u003e\n\u003cli\u003eHigh Flow Made in the USA Filter\u003c\/li\u003e\n\u003cli\u003eComes with bottom pet cock for draining oil\u003c\/li\u003e\n\u003cli\u003eDual -10 O-ring ( ORB ) outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eOverall dimensions:\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e 8.75\" H x 3.25\" Diameter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eFor Complete Catch Can Kits: \u003ca title=\"Motion catch can kits\" href=\"https:\/\/motionraceworks.com\/collections\/catch-can-kits\"\u003eClick Here\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Notable Items about the Motion Top Loader Catch Can\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Top loader catch can design maximizes oil capacity thanks to the fittings being above the top of the catch can. This means that the capacity of the catch can truly represents its capacity. \u003c\/p\u003e\n\u003cp\u003eBaffling of the top loader catch can offers to knock down events to keep oil out of the filter. While extreme cases can still fill up the catch can and potentially saturate the filter, our catch can design is made to separate the oil from your crank case evacuation and remove the pressure out the top of the catch can through the filter. Many race style catch cans on the market are simply fittings into a hollow can which offers little ability for the oil to be knocked out of the air resulting in an oily filter, our catch can nearly always prevents that from happening.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOur catch can design offers amazing packaging ability as well as true usable capacity thanks to a top location fitting design. The capacity of this catch can is approximately 20oz. We have found that this offers more than adequate true oil capacity for traditional racing use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails for use and routing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis race catch can is typically designed to connect one or more valve cover(s) directly to the fittings on the top of the catch can. We recommend a baffled fitting on your valve cover to be utilized to prevent direct oil streams from valve train entering into the fittings and line which can cause excess oil in the catch can. We also typically try to refrain from connecting a catch can from a valley cover location as there is typically excess oil activity that can cause catch cans to fill up quickly with oil and offer less effective breathing as a result. While some engines have factory valley cover venting, often times the port size is not large enough for high performance engines.\u003c\/p\u003e\n\u003cp\u003eFor baffled valve cover options you can add on at home, please take a look at our selection : \u003ca rel=\"noopener\" title=\"Valve Cover Fittings\" href=\"https:\/\/motionraceworks.com\/collections\/valve-cover-fittings-for-pcv\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWe also offer a large selection of aftermarket valve covers to avoid any fabrication or modifcation : \u003ca rel=\"noopener\" title=\"Motion Valve Covers\" href=\"https:\/\/motionraceworks.com\/collections\/baffled-valve-covers\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to design this will not facilitate dual -12AN hose ends connecting to can.  We suggest any connections needing -12 run two individual cans due to demand of flow of entire system.  \u003c\/p\u003e\n\u003cp\u003eThis can works great on LS1 LS2 LS3 LS6 LS7 LSA LS9 LSX engines as well as Coyote Mod Motor 4.6 5.4 Gen 3 Hemi Gen V LT1 LT4 L83 L86 and more!\u003c\/p\u003e\n\u003cp\u003eReference Sizing for Placement Considerations: Please note mount is clockable!\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/products\/32-100_Dual_10AN_Catch_Can_Marketing_Drawing_480x480.jpg?v=1573763779\"\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in our catch can? Watch this video to see more details!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/_CBBxlwNVnk\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No Fittings","offer_id":45182592352309,"sku":"32-100BLK","price":189.99,"currency_code":"USD","in_stock":true},{"title":"Add (x2) 6AN to 10 ORB Fittings (34-10610)","offer_id":45182592385077,"sku":"32-100BLK-1","price":214.99,"currency_code":"USD","in_stock":true},{"title":"Add (x2) 8AN to 10 ORB Fittings (34-10810)","offer_id":45182592417845,"sku":"32-100BLK-2","price":214.99,"currency_code":"USD","in_stock":true},{"title":"Add (x2) 10AN to 10 ORB Fittings (34-11010)","offer_id":45182592450613,"sku":"32-100BLK-3","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/9P4A3805-1_37343d89-a76d-4796-b727-e3f7581d7658.png?v=1777400776"}],"url":"https:\/\/shoplegacymotorsports.com\/collections\/1993-2002-4th-gen-camaro-engine-and-drivetrain.oembed?page=4","provider":"ShopLegacyMotorsports","version":"1.0","type":"link"}