{"title":"1982–1992 3rd Gen Camaro","description":"","products":[{"product_id":"82-92-chevy-camaro-3rd-gen-f-body-medium-duty-f3-front-drag-brakes-w-new-aluminum-hub-aje-style-spindle","title":"82-92 Chevy Camaro 3rd Gen F-Body Medium Duty F3 Front Drag Brakes (w\/ New Aluminum Hub) AJE style spindle","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTBM Brakes 82-92 Chevy Camaro 3rd Gen F-Body Medium Duty F3 Front Drag Brake (w\/ New Aluminum Hub) 003-0289AJE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMedium Duty Drag Racing brake kits are the latest release from TBM brakes in its drag racing line. These brakes are the perfect balance of lightweight brakes with incredible stopping power that are up to the task of stopping heavier cars as well as high demand\/high heat applications such as stock\/super stock and bracket racing vehicles that do not tend to use a parachute and utilize the brakes more than a typical heads up car or vehicle that uses the parachute every pass. Thanks to a .350\" thick Revolution rotor and F3 4 piston no drag technology caliper, these brakes are up to the task for the most extreme uses in drag racing!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF3 4 piston calipers\u003cspan\u003e \u003c\/span\u003e\u003ca title='F3 Caliper, 1.75\" Diameter Piston, 3\/8\" Rotor - 002-0056SSP-1' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0056ssp-1\"\u003e002-0056SSP-1\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\/ \u003ca title='F3 Caliper, 1.75\" Diameter Piston, 3\/8\" Rotor - 002-0056SSP-2' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0056ssp-2\"\u003e\u003cspan\u003e002-0056SSP\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e-2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"F3 Pad #1 Compound #1 - 6-0102W\" href=\"https:\/\/www.tbmbrakes.com\/products\/6-0102w\"\u003e#1 compound standard track pads 6-0102W\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003e10.75 x .350\" steel revolution rotors\u003cspan\u003e \u003c\/span\u003e\u003ca title='Revolution Rotor 10.75\" x .350\", 5 on 5.250\" Bolt Circle - 3-1075345525' href=\"https:\/\/www.tbmbrakes.com\/products\/revolution-rotor-10-75-x-350-5-on-5-250-bolt-circle-3-1075345525\" target=\"_blank\"\u003e3-1075345525\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0277AJE\u003c\/li\u003e\n\u003cli\u003eAluminum 5 on 4.75 hubs 8-103A\u003c\/li\u003e\n\u003cli\u003eTimken bearing, races and seals\u003c\/li\u003e\n\u003cli\u003e1\/2 -20” wheel studs\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Kit\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Hardware Kit 82-92 Camaro F1 - 011-0209\" href=\"https:\/\/www.tbmbrakes.com\/products\/hardware-kit-82-92-camaro-f1-011-0209\"\u003e011-0277\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e This kit fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e82-92 Chevy Camaro \/ Pontiac Firebird \/ Trans Am\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e*Please use red Loctite on all rotor bolts*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstructions: Coming Soon\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0209_82-92_CAMARO_DRAG_HUB_KIT.PDF?v=1638572168\" title=\"82-92 Camaro\/Firebird Install Instructions 001-0209 TBM Brakes\" style=\"font-size: 0.875rem;\" target=\"_blank\"\u003eAdditional Installation Info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182399316021,"sku":"003-0289AJE-1","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/f34pistontbmbrakekit_e2beeb24-d687-470e-8b9f-9c63d1e27ed3.jpg?v=1777398812"},{"product_id":"racecraft-300110-82-92-camaro-ultra-lites-2-drop-billet-spindle-lightweight-2-piston-front-brake-kit-5-on-4-75-hubs","title":"Racecraft 300110 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle Lightweight 2 Piston Front Brake Kit (5 on 4.75 Hubs)","description":"\u003cp\u003e\u003cstrong\u003eRacecraft 300110 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle Lightweight 2 Piston Front Brake Kit (5 on 4.75 Hubs)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF1 2 piston calipers\u003cspan\u003e \u003c\/span\u003e\u003ca title='F1 Caliper, 1.75\" Diameter Piston, .250\"\/.500\" Rotor - 002-0054SSP-1' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-1\"\u003e002-0054SSP-1\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\/ \u003ca title='F1 Caliper, 1.75\" Diameter Piston, .250\"\/.500\" Rotor - 002-0054SSP-2' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-2\"\u003e\u003cspan\u003e002-0054SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/6-1019\" title=\"F1 Pad #1 Compound - 6-1019\"\u003e#1 Standard F1 Pads 6-1019\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e10.75x .310 steel revolution rotors \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\" title='Revolution Rotor 10.75\" x .310\", 5 on 5.250\" Bolt Circle - 3-10753105525D'\u003e3-10753105525D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\" title='F1 to Camaro 10.75\" Rotor Caliper Bracket - 16-0216AJE'\u003e\u003cspan\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0216AJE\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAluminum 5 on 4.75 hubs 8-103\u003c\/li\u003e\n\u003cli\u003eTimken bearing, races and seals\u003c\/li\u003e\n\u003cli\u003e1\/2 -20” wheel studs\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Kit\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Hardware Kit 82-92 Camaro F1 - 011-0209\" href=\"https:\/\/www.tbmbrakes.com\/products\/hardware-kit-82-92-camaro-f1-011-0209\"\u003e011-0209\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor custom bolt pattern please contact us directly, otherwise OE factory bolt pattern will be issued.\u003c\/p\u003e\n\u003cp\u003eTBM 2 Piston (F1\/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes\/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e*Please use red Loctite on all rotor bolts*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1982-92_F1_3rd_Gen_F-Body_001-0209.pdf?v=1687201549\" target=\"_blank\"\u003e\u003cspan\u003eInstall Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0209_82-92_CAMARO_DRAG_HUB_KIT.PDF?v=1638572168\" title=\"82-92 Camaro\/Firebird Install Instructions 001-0209 TBM Brakes\" target=\"_blank\"\u003eAdditional Installation Info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182404001845,"sku":"001-0209AJE-1","price":1479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/TBMSquare_a93cb783-bac7-41b9-a9f1-0cb58a61956a.jpg?v=1777398852"},{"product_id":"racecraft-300106-82-92-camaro-2-drop-spindle","title":"Racecraft 300106 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle Lightweight 2 Piston Front Brake Kit (5 on 4.75 Hubs)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRacecraft 300106 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle Lightweight 2 Piston Front Brake Kit (5 on 4.75 Hubs)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF1 2 piston calipers\u003cspan\u003e \u003c\/span\u003e\u003ca title='F1 Caliper, 1.75\" Diameter Piston, .250\"\/.500\" Rotor - 002-0054SSP-1' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-1\"\u003e002-0054SSP-1\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\/ \u003ca title='F1 Caliper, 1.75\" Diameter Piston, .250\"\/.500\" Rotor - 002-0054SSP-2' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-2\"\u003e\u003cspan\u003e002-0054SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/6-1019\" title=\"F1 Pad #1 Compound - 6-1019\"\u003e#1 Standard F1 Pads 6-1019\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e10.75x .310 steel revolution rotors \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\" title='Revolution Rotor 10.75\" x .310\", 5 on 5.250\" Bolt Circle - 3-10753105525D'\u003e3-10753105525D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\" title='F1 to Camaro 10.75\" Rotor Caliper Bracket - 16-0216AJE'\u003e\u003cspan\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0216AJE\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAluminum 5 on 4.75 hubs 8-103\u003c\/li\u003e\n\u003cli\u003eTimken bearing, races and seals\u003c\/li\u003e\n\u003cli\u003e1\/2 -20” wheel studs\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Kit\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Hardware Kit 82-92 Camaro F1 - 011-0209\" href=\"https:\/\/www.tbmbrakes.com\/products\/hardware-kit-82-92-camaro-f1-011-0209\"\u003e011-0209\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor custom bolt pattern please contact us directly, otherwise OE factory bolt pattern will be issued.\u003c\/p\u003e\n\u003cp\u003eTBM 2 Piston (F1\/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes\/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e*Please use red Loctite on all rotor bolts*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/1982-92_F1_3rd_Gen_F-Body_001-0209.pdf?v=1687201549\" target=\"_blank\"\u003e\u003cspan\u003eInstall Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0209_82-92_CAMARO_DRAG_HUB_KIT.PDF?v=1638572168\" title=\"82-92 Camaro\/Firebird Install Instructions 001-0209 TBM Brakes\" target=\"_blank\"\u003eAdditional Installation Info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182404067381,"sku":"001-0209AJE-1","price":1479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/TBMSquare_9d0c936f-83ce-4a20-be15-c94530ab9ef6.jpg?v=1777398853"},{"product_id":"racecraft-300114-82-92-camaro-ultra-lites-2-drop-billet-spindle-2-piston-spindle-mount-wheel-front-brake-kit","title":"Racecraft 300114 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle 2 Piston Spindle Mount Wheel Front Brake Kit","description":"\u003cp\u003e\u003cstrong\u003eRacecraft 300114 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle 2 Piston Spindle Mount Wheel Front Brake Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eKit includes:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) DR-1 Calipers\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\" title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044ssp-1'\u003e002-0044SSP-1\u003c\/a\u003e\u003cspan\u003e \/ \u003c\/span\u003e\u003ca title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044SSP-2' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\"\u003e\u003cspan\u003e002-0044SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2)\u003cspan\u003e 1\u003c\/span\u003e\u003cspan\u003e0.75\"x.3100 \u003c\/span\u003erotors\u003cspan\u003e \u003c\/span\u003e\u003ca title='Revolution Rotor 10.75\" x .3125\", 5 on 6.250\" Bolt Circle - 3-107531255625D' href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\"\u003e3-107531255625D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) full set (2 calipers) of pads \u003ca title=\"F1 Pad #1 Compound - 6-1019\" href=\"https:\/\/www.tbmbrakes.com\/products\/6-1019\"\u003e#1 Standard F1 Pads 6-1019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Caliper mounting brackets \u003ca title='F1 to Strange Strut 10.75\" Rotor Left Caliper Bracket - 16-0210-1' href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-strange-strut-10-75-rotor-left-caliper-bracket-16-0210-1\"\u003e16-0210-1\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\/ \u003ca title='F1 to Strange Strut 10.75\" Rotor Right Caliper Bracket - 16-0210-2' href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-strange-strut-10-75-rotor-right-caliper-bracket-16-0210-2\"\u003e16-0210-2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Hats 204-0211\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit \u003ca title=\"Hardware Kit, Spindle Mount, Strange - 011-0204\" href=\"https:\/\/www.tbmbrakes.com\/products\/hardware-kit-spindle-mount-strange-011-0204\"\u003e011-0204\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*Please use red Loctite on all rotor bolts*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eInstall Instructions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Racecraft_Spindle_Mount_Wheel_DR-1_Front_Brake_Kit_001-0204.pdf?v=1707839160\"\u003e\u003cspan\u003e001-0204\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(Racecraft Billet Spindle)\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cspan\u003eWe recommend using \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003eFor all Racecraft Kit Options\/References See This Chart\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/TBM_Racecraft.jpg?v=1673452358\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182404591669,"sku":"001-0204-1","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_6000-No_Strut_e056de70-0723-479a-8adb-e7a9999bee13.jpg?v=1777398859"},{"product_id":"racecraft-300114-82-92-camaro-ultra-lites-2-drop-billet-spindle-2-piston-front-brake-kit-5-on-4-50-hubs","title":"Racecraft 300114 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle 2 Piston Front Brake Kit (5 on 4.50 Hubs)","description":"\u003cp\u003e\u003cstrong\u003eRacecraft 300114 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle 2 Piston Front Brake Kit (5 on 4.50 Hubs)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF1 2 piston calipers \u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-caliper-o-ring-1-75-piston-3-25-mount-0-5-rotor-0-41-pad-002-0054ssp-1?variant=42754100461780\" target=\"_blank\"\u003e002-0054SSP-1\u003c\/a\u003e\u003cspan\u003e \/ \u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-caliper-o-ring-1-75-piston-3-25-mount-0-5-rotor-0-41-pad-002-0054ssp-2?variant=42754101706964\" target=\"_blank\"\u003e002-0054SSP-2\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/6-1019\" title=\"F1 Pad #1 Compound - 6-1019\"\u003e#1 Standard F1 Pads 6-1019\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e10.75x .310 steel revolution rotors \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\" title='Revolution Rotor 10.75\" x .310\", 5 on 5.250\" Bolt Circle - 3-10753105525D'\u003e3-10753105525D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSteel caliper mounting brackets \u003ca title='F1 to Strange Strut 10.75\" Rotor Left Caliper Bracket - 16-0210-1' href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-strange-strut-10-75-rotor-left-caliper-bracket-16-0210-1\"\u003e16-0210-1\u003c\/a\u003e\u003cspan\u003e \/ \u003c\/span\u003e\u003ca title='F1 to Strange Strut 10.75\" Rotor Right Caliper Bracket - 16-0210-2' href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-strange-strut-10-75-rotor-right-caliper-bracket-16-0210-2\"\u003e16-0210-2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAluminum 5 on 4.50 hubs 8-107\u003c\/li\u003e\n\u003cli\u003eTimken bearing, races and seals\u003c\/li\u003e\n\u003cli\u003e1\/2 -20” wheel studs\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Hardware Kit, F1, Strange GT Strut \/ TRZ \/ Racecraft Hub Mount - 011-0210\" href=\"https:\/\/www.tbmbrakes.com\/products\/hardware-kit-f1-strange-hub-011-0210\"\u003e011-0210\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit weight: 20 lbs\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/tone-ring-and-hall-effect-sensor-kit\" target=\"_blank\"\u003eWheel Speed Sensor Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWe recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.\u003c\/p\u003e\n\u003cp\u003eTBM 2 Piston (F1\/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes\/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182404788277,"sku":"001-0216-1","price":1479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/TBM-2-Piston-Front-Drag-Racing-Brake-Kit_dd38c186-ecad-4adf-b4cb-87da2c2aec08.jpg?v=1777398859"},{"product_id":"racecraft-300114-93-02-camaro-ultra-lites-2-drop-billet-spindle-lightweight-2-piston-front-brake-kit-5-on-4-75-hubs","title":"Racecraft 300114 (82-92 Camaro) Ultra Lites 2\" Drop Billet Spindle Lightweight 2 Piston Front Brake Kit (5 on 4.75 Hubs)","description":"\u003cp\u003e\u003cstrong\u003eRacecraft 300114 (82\u003c\/strong\u003e\u003cstrong\u003e-92 Camaro) Ultra Lites 2\" Drop Billet Spindle Lightweight 2 Piston Front Brake Kit (5 on 4.75 Hubs)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF1 2 piston calipers \u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-caliper-o-ring-1-75-piston-3-25-mount-0-5-rotor-0-41-pad-002-0054ssp-1?variant=42754100461780\" target=\"_blank\"\u003e002-0054SSP-1\u003c\/a\u003e\u003cspan\u003e \/ \u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-caliper-o-ring-1-75-piston-3-25-mount-0-5-rotor-0-41-pad-002-0054ssp-2?variant=42754101706964\" target=\"_blank\"\u003e002-0054SSP-2\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"F1 Pad #1 Compound - 6-1019\" href=\"https:\/\/www.tbmbrakes.com\/products\/6-1019\"\u003e#1 Standard F1 Pads 6-1019\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e10.75x .310 steel revolution rotors \u003ca title='Revolution Rotor 10.75\" x .310\", 5 on 5.250\" Bolt Circle - 3-10753105525D' href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\"\u003e3-10753105525D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSteel caliper mounting brackets \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-strange-strut-10-75-rotor-left-caliper-bracket-16-0210-1\" title='F1 to Strange Strut 10.75\" Rotor Left Caliper Bracket - 16-0210-1'\u003e16-0210-1\u003c\/a\u003e\u003cspan\u003e \/ \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-strange-strut-10-75-rotor-right-caliper-bracket-16-0210-2\" title='F1 to Strange Strut 10.75\" Rotor Right Caliper Bracket - 16-0210-2'\u003e16-0210-2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAluminum 5 on 4.75 hubs 8-103\u003c\/li\u003e\n\u003cli\u003eTimken bearing, races and seals\u003c\/li\u003e\n\u003cli\u003e1\/2 -20” wheel studs\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/hardware-kit-f1-strange-hub-011-0210\" title=\"Hardware Kit, F1, Strange GT Strut \/ TRZ \/ Racecraft Hub Mount - 011-0210\"\u003e011-0210\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKit weight: 20 lbs\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/tone-ring-and-hall-effect-sensor-kit\" target=\"_blank\"\u003eWheel Speed Sensor Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWe recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.\u003c\/p\u003e\n\u003cp\u003eTBM 2 Piston (F1\/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes\/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182404886581,"sku":"001-0210-1","price":1479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/TBM-2-Piston-Front-Drag-Racing-Brake-Kit_eed3bfea-3e4d-4450-97cc-96cbcf0837c9.jpg?v=1777398861"},{"product_id":"82-92-camaro-3rd-gen-xs3-front-extreme-street-brake-kit-pre-order-shipping-12-13-24","title":"82-92 Camaro 3rd Gen XS3 Front Extreme Street Brake Kit","description":"\u003ch3 class=\"p1\"\u003e82-92 Camaro 3rd Gen XS3 Front Extreme Street Brake Kit 012-0209 \u003c\/h3\u003e\n\u003cp class=\"p1\"\u003eNote: These fit most 15\" and larger wheels\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eKit Instructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/3rd_Gen_Camaro_Front_XS3_-_012-0209.pdf?v=1734472193\"\u003e\u003cstrong\u003eClick Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eRead Before Installing: \u003cspan class=\"s1\"\u003e\u003cb\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/TBM_Street_Brake_ProceduresV1.pdf?v=1719865656\" rel=\"noopener\" target=\"_blank\"\u003eClick Here\u003c\/a\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003e\u003cstrong\u003eWeight: 16.20lbs Per Side\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eBuilt with over 30 years of heritage in racing, TBM Brakes introduces its first purpose built street performance brake kit, the XS3 series featuring a 12.19\" vented rotor. Designed to be the bridge between our lightweight single thickness steel racing brakes and the large diameter rotor street performance brakes commonly seen in late model vehicles while providing incredible stopping power.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis brake kit was specifically designed to give the ability to run smaller diameter \/ factory size wheels without sacrificing braking potential. We even found this kit able to work with many steel factory 15\" wheels as well as drag racing wheels. \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eRace Inspired XS3 4 Piston Caliper\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eBillet housings machined from solid 6061 Aluminum Alloy\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eCrossflow caliper design eliminates external tubes, and promotes equal pressure to piston distribution \u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e(4) 1.75\" OD pistons per caliper deliver exceptional stopping power and pedal feedback\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eTwo Part Durable Powdercoated Calipers (choose color in options)\u003c\/li\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eRace Red\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eSatin Blue Metallic\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eVelocity Yellow\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eGunmetal Gray\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eOnyx Black\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eBlack Anodized Brackets, Hats\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eDark Zinc Plated rotors offer corrosion resistance before and after installation (please note rotor color can vary due to process)\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eBillet CNC Machined 304 Stainless Steel Pistons\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eUnique Cross flow fluid design for smoother operation\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e12 point hardware\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eRace derived caliper design provides excellent stopping and better pedal feel\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003eMade in the USA in our Bradenton, FL location!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: As of 11\/29\/25 This kit now uses a 008-119A Hub Kit which maintains the factory offset. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(1) 12.19\" vented rotors 3-121981087-1\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(1) 12.19\" vented rotors 3-121981087-2\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cb\u003e(2) 5x4.75\" Bolt Pattern Billet Aluminum Black Anodized Hubs 008-0119\u003c\/b\u003e\u003cb\u003eA\u003c\/b\u003e\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cb\u003e(10) 1\/2\" by 2\" wheel studs\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(2) XS3 4 Piston Caliper (Choose color below)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003e(2) Caliper Bracket 17-0099\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eComplete Set of Pads \u003c\/b\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/sx3-replacement-brake-pads-6-0002hps\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003e6-0002HPS\u003c\/b\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cb\u003eHardware Kit 011-0361\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eInnovative caliper with class leading stopping power!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe XS3 Extreme Street caliper is an innovative new design built off principles and engineering from our line of racing calipers. This all billet caliper provides ultimate in strength for a better feel and performance. With a stronger bridge strength and more rigid caliper than most aftermarket aluminum calipers we are able to provide larger clamping force to achieve the brake torque to stop your vehicle. Choose your choice of color in powdercoat. \u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003e12.19\" Slotted \u0026amp; Vented Rotor Balances Weight and Durability\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eOur cast vented and slotted 12.19\" rotor was designed to balance weight, stopping power, cooling ability, and looks while keeping the ability to package with most factory and aftermarket wheels 15\" and larger. These rotors are black plated to protect against rusting \/ corrosion and look good before first use and beyond.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eProven Brake Pad Technology:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eUtilizing the Hawk Performance HPS Ferro Carbon compound, this brake pad strikes the perfect balance of stopping potential without bringing noisy brake pads and large amounts of brake dust into play.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eBillet TBM Brake Hats\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eOur billet aluminum brake hats remove the weight of a steel center all in one rotor while allowing for minor adjustment of axle offset thanks to our unique stepped mounting design.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eNote\u003c\/b\u003e: We do not recommend the use of silicone based brake fluid with these calipers. Only use approved DOT3, DOT4, or DOT 5.1 brake fluid. We recommend using TBM Extreme 6 Fluid for best results.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cb\u003eTo purchase TBM Extreme 6 DOT 5.1 fluid: \u003c\/b\u003e\u003ca href=\"https:\/\/tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid?variant=42441905340628\"\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eCLICK HERE\u003c\/b\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThese brakes perform and operate best at 6-800 psi brake pressure under normal braking pressure. The proper master cylinder and pedal ratio is essential to proper performance. Don't know how to calculate this? Give our team a call, we are happy to help! (800) 878-9274\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eFor Max OD Reference of this kit for barrel fitment see below\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/MaxOD.png?v=1715277807\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Calipers.png?v=1715188068\"\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Onyx Black","offer_id":45182429560885,"sku":"012-0209-1","price":1479.0,"currency_code":"USD","in_stock":true},{"title":"Race Red","offer_id":45182429593653,"sku":"012-0209-2","price":1479.0,"currency_code":"USD","in_stock":true},{"title":"Satin Metallic Blue","offer_id":45182429626421,"sku":"012-0209-3","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Velocity Yellow","offer_id":45182429659189,"sku":"012-0209-4","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Gunmetal Gray","offer_id":45182429691957,"sku":"012-0209-5","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/XS3_Billet_Hub_Red_0acaaa92-6010-41a9-9eba-eb9f15e1832b.jpg?v=1777399084"},{"product_id":"1982-92-camaro-wing-0-5-low-prep-wicker-bill-31-17007","title":"1982-92 Camaro Wing +0.5\" Low Prep Wicker Bill 31-17007","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e1982-92 Camaro Wing +0.5\" Low Prep Wicker Bill 31-17007\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for low prep situations and added down force, this wicker bill is a direct replacement for the standard equipment wicker bill on our Motion Raceworks drag wings. This wicker adds 0.5\" of height to the standard wicker and is adjustable. \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e*Note: This is designed and only works for Motion Raceworks wing 31-170*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReuses original hardware\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182506139701,"sku":"31-17007","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/wick1_20d0e9d2-9d04-46ff-8d00-c5276d31eefe.jpg?v=1777399788"},{"product_id":"1982-1992-3rd-camaro-firebird-f3-4-piston-caliper-hub-kit-001-0289-1","title":"1982-1992 3rd Camaro \/ Firebird F3 4 Piston Caliper Hub Kit - 001-0289-1","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1982-1992 3rd Camaro \/ Firebird F3 4 Piston Caliper Hub Kit - 001-0289-1\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch5 data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eKit includes:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h5\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eF3 4 piston calipers\u003cspan data-mce-fragment=\"1\"\u003e \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-o-ring-1-75-piston-5-25-mount-38-rotor-49-pad-002-0056ssp-1\" title=\"F3 4 Piston -1\" target=\"_blank\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-o-ring-1-75-piston-5-25-mount-38-rotor-49-pad-002-0056ssp-1\" data-mce-fragment=\"1\"\u003e002-056SSP-1\u003c\/a\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\/\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-o-ring-1-75-piston-5-25-mount-38-rotor-49-pad-002-0056ssp-2\" title=\"F3 4 Piston 002-0056SSP-2\" target=\"_blank\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f3-caliper-o-ring-1-75-piston-5-25-mount-38-rotor-49-pad-002-0056ssp-2\" data-mce-fragment=\"1\"\u003e002-0056SSP-2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10.75x .310 steel revolution rotors\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\" title='Revolution Rotor 10.75\" x .310\", 5 on 5.250\" Bolt Circle - 3-10753105525D' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\" data-mce-fragment=\"1\"\u003e3-10753105525D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e#1 Standard F3 Pads\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f3-pads\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.motionraceworks.com\/products\/f3-pads\" target=\"_blank\"\u003e\u003cspan face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\" data-mce-fragment=\"1\"\u003e6-1020W\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan mce-data-marked=\"1\" data-mce-fragment=\"1\"\u003eCaliper Mounting Brackets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminum 5 on 4.75 hubs 8-103\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHardware Kit: 011-0200\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTimken bearing, races and seals\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1\/2 -20” wheel studs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll necessary mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1982-92_F3_3rd_Gen_F-Body_001-0289_2024.pdf?v=1704761319\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstall Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e⚠ WARNING\u003c\/strong\u003e: Cancer and Reproductive Harm \u003ca href=\"http:\/\/www.p65warnings.ca.gov\/\" data-mce-href=\"http:\/\/www.p65warnings.ca.gov\/\" data-mce-fragment=\"1\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e*Please use red loctite on all rotor bolts*\u003c\/strong\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182511349813,"sku":"001-0289-1","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/f34pistontbmbrakekit_8f9f7512-2f0a-416e-8403-1e666814a851.webp?v=1777399828"},{"product_id":"1982-92-3rd-gen-camaro-firebird-operator-shifter-mounting-plate-16-15003","title":"1982-92 3rd Gen Camaro\/Firebird Operator Shifter Mounting Plate (Factory Automatic Tunnel)","description":"\u003cp\u003e\u003cstrong\u003e1982-92 3rd Gen Camaro\/Firebird Operator Shifter Mounting Plate 16-15003\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to make a bolt in and easy mounting solution for the Operator Series shifter, this mount was designed to work with the 1982-92 Third Gen Camaro and its factory console with slight modification. \u003c\/p\u003e\n\u003cp\u003eThis Mount is made from CNC laser cut steel, tig welded. They are no longer zinc plated to allow you to coat\/paint it to match your setup.. \u003c\/p\u003e\n\u003cp\u003eNote: Hardware not included\u003c\/p\u003e\n\u003cp\u003eNote: This requires the 1.25\" Tube mount option for proper mounting. This mount can be found here: \u003ca title='1.250\" Operator Tube Mount' href=\"https:\/\/www.motionraceworks.com\/products\/operator-shifter-billet-tube-mount-for-75-1-250-tubing\" target=\"_blank\"\u003ehttps:\/\/www.motionraceworks.com\/products\/operator-shifter-billet-tube-mount-for-75-1-250-tubing\u003c\/a\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182518034485,"sku":"16-15003","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/0002s_0001_82-92AutoF-Body.jpg?v=1777399895"},{"product_id":"1982-92-chevrolet-camaro-3rd-gen-fbody-front-drag-racing-brakes","title":"82-92 Chevy Camaro 3rd Gen F-Body Front Drag Racing Brakes (w\/ New Aluminum Hub) 001-0209","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTBM Brakes 82-92 Chevy Camaro 3rd Gen F-Body Front Drag Brake (w\/ New Aluminum Hub) 001-0209\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis front brake kit for a 1982-92 Chevrolet Camaro 3rd Gen F-Body is for mounting to a stock disc brake style spindle.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1982-92_F1_3rd_Gen_F-Body_001-0209_2024.pdf?v=1704761319\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1982-92_F1_3rd_Gen_F-Body_001-0209_2024.pdf?v=1704761319\" target=\"_blank\" data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF1 2 piston calipers\u003cspan\u003e \u003c\/span\u003e\u003ca title='F1 Caliper, 1.75\" Diameter Piston, .250\"\/.500\" Rotor - 002-0054SSP-1' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-1\"\u003e002-0054SSP-1\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\/ \u003ca title='F1 Caliper, 1.75\" Diameter Piston, .250\"\/.500\" Rotor - 002-0054SSP-2' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-2\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-2\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0054SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e#1 Standard F1 Pads \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" data-mce-href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" target=\"_blank\"\u003e6-1019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e10.75x .310 steel revolution rotors \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\" title='Revolution Rotor 10.75\" x .310\", 5 on 5.250\" Bolt Circle - 3-10753105525D' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\" data-mce-fragment=\"1\"\u003e3-10753105525D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216\" title='F1 to Camaro 10.75\" Rotor Caliper Bracket - 16-0216'\u003e\u003cspan data-mce-fragment=\"1\"\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0216\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAluminum 5 on 4.75 hubs 8-103\u003c\/li\u003e\n\u003cli\u003eTimken bearing, races and seals\u003c\/li\u003e\n\u003cli\u003e1\/2 -20” wheel studs\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1982-92_F1_3rd_Gen_F-Body_001-0209_2024.pdf?v=1704761319\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1982-92_F1_3rd_Gen_F-Body_001-0209_2024.pdf?v=1704761319\" data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003eInstall Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e This kit fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e82-92 Chevy Camaro \/ Pontiac Firebird \/ Trans Am\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182532878389,"sku":"001-0209-1","price":1479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/TBMSquare_e3fbc8cc-b75e-46f3-b327-766d58103964.jpg?v=1777400058"},{"product_id":"82-92-camaro-aftermarket-spindles-aje-burkhart-spindle-mount-wheel-001-0251","title":"82-92 Chevy Camaro w\/ Aftermarket Spindles (AJE, Burkhart) Spindle Mount Wheel 001-0251","description":"\u003cp\u003e\u003cstrong\u003e82-92 Chevrolet Camaro w\/ Aftermarket Spindles (AJE, Burkhart) Spindle Mount Wheel 001-0251\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThis spindle front brake kit works with the following:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e82-92 Chevrolet Camaro using aftermarket spindles (AJE, Burkhart)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) DR-1 Calipers\u003cspan\u003e \u003c\/span\u003e\u003ca title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044ssp-1' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\"\u003e002-0044SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\" title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044SSP-2' data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0044SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) \u003cspan data-mce-fragment=\"1\"\u003e10.75\"x.3100 \u003c\/span\u003erotors\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\" title='Revolution Rotor 10.75\" x .3125\", 5 on 6.250\" Bolt Circle - 3-107531255625D' data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\"\u003e3-107531255625D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) \u003cmeta charset=\"utf-8\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e#1 Standard F1 Pads \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" target=\"_blank\"\u003e6-1019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\" title='F1 to Camaro 10.75\" Rotor Caliper Bracket - 16-0216AJE' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0216AJE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Hats 204-0211\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit 011-0204\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM 2 Piston (F1\/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes\/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cdiv class=\"description bottom\"\u003e\n\u003cp\u003e\u003ca title=\"Strange GT Strut \/ TRZ \/ Racecraft Front Spindle Mount Drag Racing Brakes 001-0204 Installation Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Install_Sheet_001-0204_new.pdf?v=1638571533\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Install_Sheet_001-0204_new.pdf?v=1638571533\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Strange Spindle Mount TBM Brakes Installation Instructions 001-0204\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0204_STRANGE_SPINDLE_MOUNT..PDF?v=1638571533\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0204_STRANGE_SPINDLE_MOUNT..PDF?v=1638571533\" target=\"_blank\"\u003eAdditional Installation Info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182546051125,"sku":"001-0251-1","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_6000-No_Strut_5e835711-8ec7-4e9e-ac99-2ea3bc97b9c3.jpg?v=1777400207"},{"product_id":"82-92-camaro-spindle-mount-wheel-front-drag-racing-brake-kit-001-0275","title":"82-92 Chevy Camaro Spindle Mount Wheel Front Drag Racing Brake Kit 001-0275","description":"\u003cp\u003e\u003cstrong\u003e82-92 Chevrolet Camaro Spindle Mount Wheel Front Drag Racing Brake Kit 001-0275\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eThis spindle front brake kit works with the following:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e82-92 Chevrolet Camaro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) DR-1 Calipers\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\" title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044ssp-1' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\" data-mce-fragment=\"1\"\u003e002-0044SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044SSP-2' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0044SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2)\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e10.75\"x.3100 \u003c\/span\u003erotors\u003cspan\u003e \u003c\/span\u003e\u003ca title='Revolution Rotor 10.75\" x .3125\", 5 on 6.250\" Bolt Circle - 3-107531255625D' href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\" data-mce-fragment=\"1\"\u003e3-107531255625D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) \u003cmeta charset=\"utf-8\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e#1 Standard F1 Pads \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" target=\"_blank\"\u003e6-1019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216\" title='F1 to Camaro 10.75\" Rotor Caliper Bracket - 16-0216' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0216\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Hats 204-0211\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit 011-0204\u003c\/li\u003e\n\u003cli\u003e(2) A34 (Set 34) Timken Bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cmeta charset=\"utf-8\"\u003e*Note: this kit requires you to use supplied Set 34 bearings in lieu of current outer wheel bearings. If using non supplied bearings, please use comparable bearing to supplied Set 34\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM 2 Piston (F1\/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes\/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.\u003c\/p\u003e\n\u003cdiv class=\"description bottom\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Install_Sheet_001-0204_new.pdf?v=1638571533\" title=\"Strange GT Strut \/ TRZ \/ Racecraft Front Spindle Mount Drag Racing Brakes 001-0204 Installation Instructions\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Install_Sheet_001-0204_new.pdf?v=1638571533\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0204_STRANGE_SPINDLE_MOUNT..PDF?v=1638571533\" title=\"Strange Spindle Mount TBM Brakes Installation Instructions 001-0204\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0204_STRANGE_SPINDLE_MOUNT..PDF?v=1638571533\" target=\"_blank\"\u003eAdditional Installation Info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-fragment=\"1\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182546116661,"sku":"001-0275-1","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_6000-No_Strut_3b0b7d86-f82d-47f4-bbc1-1df387468634.jpg?v=1777400208"},{"product_id":"82-92-chevy-camaro-3rd-gen-f-body-front-drag-racing-brakes-w-new-aluminum-hub-001-0209aje","title":"82-92 Chevy Camaro 3rd Gen F-Body Front Drag Racing Brakes (w\/ New Aluminum Hub) AJE style spindle 001-0209AJE","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTBM Brakes 82-92 Chevy Camaro 3rd Gen F-Body Front Drag Brake (w\/ New Aluminum Hub) AJE style spindle 001-0209AJE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp\u003eThis front brake kit for a 1982-92 Chevrolet Camaro 3rd Gen F-Body is for mounting to a stock disc brake style spindle.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF1 2 piston calipers\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-1\" title='F1 Caliper, 1.75\" Diameter Piston, .250\"\/.500\" Rotor - 002-0054SSP-1'\u003e002-0054SSP-1\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\/ \u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/002-0054ssp-2\" title='F1 Caliper, 1.75\" Diameter Piston, .250\"\/.500\" Rotor - 002-0054SSP-2'\u003e\u003cspan\u003e002-0054SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e#1 Standard F1 Pads \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" target=\"_blank\"\u003e6-1019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e10.75x .310 steel revolution rotors \u003ca title='Revolution Rotor 10.75\" x .310\", 5 on 5.250\" Bolt Circle - 3-10753105525D' href=\"https:\/\/www.tbmbrakes.com\/products\/3-10753105525d\"\u003e3-10753105525D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca title='F1 to Camaro 10.75\" Rotor Caliper Bracket - 16-0216AJE' href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\"\u003e\u003cspan\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0216AJE\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAluminum 5 on 4.75 hubs 8-103\u003c\/li\u003e\n\u003cli\u003eTimken bearing, races and seals\u003c\/li\u003e\n\u003cli\u003e1\/2 -20” wheel studs\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e This kit fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e82-92 Chevy Camaro \/ Pontiac Firebird \/ Trans Am\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/1982-92_F1_3rd_Gen_F-Body_001-0209_2024.pdf?v=1704761319\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstall Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe recommend using \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182550605877,"sku":"001-0209AJE-1","price":1479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/TBMSquare_843fe273-40d3-407d-898f-30ee06ab86dd.jpg?v=1777400280"},{"product_id":"82-92-chevrolet-camaro-spindle-mount-wheel-001-0275","title":"82-92 Chevrolet Camaro Spindle Mount Wheel 001-0275","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e82-92 Chevrolet Camaro Spindle Mount Wheel 001-0275\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis spindle front brake kit works with the following:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e82-92 Chevy Camaro (and Pontiac Firebird\/Trans Am) using aftermarket spindles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) DR-1 Calipers\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\" title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044ssp-1' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\"\u003e002-0044SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044SSP-2' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0044SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) \u003cspan data-mce-fragment=\"1\"\u003e10.75\"x.3100 \u003c\/span\u003erotors\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" title='Revolution Rotor 10.75\" x .3125\", 5 on 6.250\" Bolt Circle - 3-107531255625D' href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\"\u003e3-107531255625D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e#1 Standard DR-1 Pads \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" target=\"_blank\" data-mce-href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\"\u003e6-1019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) \u003ca data-mce-fragment=\"1\" title='F1 to Camaro 10.75\" Rotor Caliper Bracket - 16-0216AJE' href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0216AJE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) Hats 204-0211\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounting hardware kit 011-0204\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM 2 Piston (F1\/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes\/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"description bottom\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Install_Sheet_001-0204_new.pdf?v=1638571533\" title=\"Strange GT Strut \/ TRZ \/ Racecraft Front Spindle Mount Drag Racing Brakes 001-0204 Installation Instructions\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Install_Sheet_001-0204_new.pdf?v=1638571533\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0204_STRANGE_SPINDLE_MOUNT..PDF?v=1638571533\" title=\"Strange Spindle Mount TBM Brakes Installation Instructions 001-0204\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0204_STRANGE_SPINDLE_MOUNT..PDF?v=1638571533\"\u003eAdditional Installation Info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182551130165,"sku":"001-0275-1","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_6000-No_Strut_37deecef-85ac-44ff-8ed3-4f2bd2c5477e.jpg?v=1777400284"},{"product_id":"82-92-camaro-aftermarket-spindles-racecraft-aje-burkhart-spindle-mount-wheel-001-0251","title":"82-92 Camaro w\/ Aftermarket Spindles (Racecraft, AJE, Burkhart) Spindle Mount Wheel 001-0251","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e82-92 Camaro w\/ Aftermarket Spindles (Racecraft, AJE, Burkhart) Spindle Mount Wheel 001-0251\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis spindle front brake kit works with the following:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e82-92 Chevrolet Camaro (and Pontiac Firebird\/Trans Am) using aftermarket spindles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded in this kit:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) DR-1 Calipers\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\" title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044ssp-1' data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-1\" data-mce-fragment=\"1\"\u003e002-0044SSP-1\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \/ \u003c\/span\u003e\u003ca title='DR1 Caliper, 1.75\" Diameter Piston, .3125\" Rotor - 002-0044SSP-2' href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/002-0044ssp-2\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e002-0044SSP-2\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) \u003cspan data-mce-fragment=\"1\"\u003e10.75\"x.3100 \u003c\/span\u003erotors\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca title='Revolution Rotor 10.75\" x .3125\", 5 on 6.250\" Bolt Circle - 3-107531255625D' href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/3-107531255625d\" data-mce-fragment=\"1\"\u003e3-107531255625D\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) \u003cmeta charset=\"utf-8\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e#1 Standard DR-1 Pads \u003c\/span\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.motionraceworks.com\/products\/f1-pads\" target=\"_blank\"\u003e6-1019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) \u003ca title='F1 to Camaro 10.75\" Rotor Caliper Bracket - 16-0216AJE' href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/f1-to-camaro-10-75-rotor-caliper-bracket-16-0216aje\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAluminum caliper mounting brackets 1\u003c\/span\u003e6-0216AJE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(2) Hats 204-0211\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounting hardware kit 011-0204\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTBM 2 Piston (F1\/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes\/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.\u003c\/p\u003e\n\u003cdiv class=\"description bottom\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Install_Sheet_001-0204_new.pdf?v=1638571533\" title=\"Strange GT Strut \/ TRZ \/ Racecraft Front Spindle Mount Drag Racing Brakes 001-0204 Installation Instructions\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/Install_Sheet_001-0204_new.pdf?v=1638571533\" data-mce-fragment=\"1\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0204_STRANGE_SPINDLE_MOUNT..PDF?v=1638571533\" title=\"Strange Spindle Mount TBM Brakes Installation Instructions 001-0204\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/4273\/0964\/files\/001-0204_STRANGE_SPINDLE_MOUNT..PDF?v=1638571533\" data-mce-fragment=\"1\"\u003eAdditional Installation Info\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend using \u003c\/span\u003e\u003ca href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" title=\"TBM DOT 5.1 Extreme 6 Brake Fluid 12 oz\" data-mce-href=\"https:\/\/www.tbmbrakes.com\/products\/tbm-dot-5-1-extreme-6-brake-fluid\" data-mce-fragment=\"1\"\u003eTBM DOT 5.1 Extreme 6 Brake Fluid\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182551195701,"sku":"001-0251-1","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/MRW_6000-No_Strut_e0499aad-0e57-46f0-8923-0ade5c20e833.jpg?v=1777400286"},{"product_id":"82-92-chevy-camaro-drag-wing-31-170","title":"1982-92 Chevy Camaro Aluminum 15\" Strutless Drag Wing 31-170","description":"\u003ch5\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\" data-mce-style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1982-92 Chevy Camaro Aluminum 15\" Strutless Drag Wing 31-170\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cbr\u003eThird Gen Camaro wing is the first of its kind strutless wing for a 1982-92 Camaro RS, Z28, Iroc-Z. This wing was designed to retain functionality of the rear decklid without having to disconnect struts while retaining rigidity needed for an effective wing.\u003cbr\u003e\u003cbr\u003eWorks with Motion Raceworks 3rd Gen Parachute wing length parachute mount.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/1982-92-third-gen-fbody-parachute-mount-camaro-firebird-trans-am\" target=\"_blank\" title=\"1982-92 3rd Gen Camaro\/Firebird\/Trans Am Parachute Mount 14-110\" rel=\"noopener noreferrer\"\u003e1982-92 3rd Gen Camaro\/Firebird\/Trans Am Parachute Mount 14-110\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Default Title","offer_id":45182553784373,"sku":"31-170","price":495.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/3rdGenCamaro.jpg?v=1777400320"},{"product_id":"steering-u-joint-36-spline-to-3-4-round-15-50010","title":"Steering U-Joint 36 Spline to 3\/4 Round-15-50010","description":"\u003cp\u003e\u003cstrong\u003eSteering U-Joint 13\/16 36 Spline to 3\/4 Round-15-50010\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis joint adapts a 67-72 Nova\/Camaro FACTORY steering box to a Motion Race style column.  \u003c\/p\u003e\n\u003cp\u003eNote: Aftermarket replacement steering boxes may use a different spline count.  \u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":45182558830645,"sku":"15-50010","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/steering-steering-u-joint-3-4-30-spline-to-3-4-dd-1_ac9840af-cb65-45cc-9aed-a618a22efc8d.jpg?v=1777400379"},{"product_id":"motion-raceworks-3rd-gen-camaro-firebird-billet-aluminum-master-cylinder-conversion-kit-20-10015","title":"Motion Raceworks 1982-92 3rd Gen Camaro \/ Firebird Billet Aluminum Manual Master Cylinder Conversion Kit 20-160","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMotion Raceworks 3rd Gen Camaro \/ Firebird Billet Aluminum Master Cylinder Conversion Kit 20-160\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003eOur Manual Brake Master cylinder kit utilizes a billet firewall mounting plate CNC'd from 6061 Aluminum. This plate is designed to utilize a Strange Engineering Mopar Dual Master Cylinder. This requires you to drill your brake pedal for the master cylinder pushrod Kit includes all hardware necessary, Strange Engineering Mopar Dual Master Cylinder.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eNote: Master cylinder need to match the brake system they are being used with. To access our Brake Calculator page to determine what is best for your vehicle click the following link:  \u003c\/span\u003e\u003ca title=\"Brake Calculator Page\" href=\"https:\/\/www.motionraceworks.com\/pages\/brake-system-setup-and-calculations\" target=\"_blank\"\u003ehttps:\/\/www.motionraceworks.com\/pages\/brake-system-setup-and-calculations\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncluded: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e6:1 Pedal Ratio optimized for manual brakes\u003c\/li\u003e\n\u003cli\u003eBillet Manual Master Cylinder Firewall Plate for 3rd Gen Camaro\u003c\/li\u003e\n\u003cli\u003eStrange Dual Mopar Master Cylinder\u003c\/li\u003e\n\u003cli\u003eHardware for Installation\u003c\/li\u003e\n\u003cli\u003eBrake Push Rod w\/ Heim Joint for attaching to pedal\u003c\/li\u003e\n\u003cli\u003eFittings for Master Cylinder\u003c\/li\u003e\n\u003cli\u003eTemplate for firewall modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit improves the brake pedal ratio for use with manual brakes vs. power brakes.  While sharing the original bolt pattern, this requires you to modify the existing hole where the master cylinder goes through the firewall to accommodate the stronger ratio.  Template included in package.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to the difference in pedal travel based off of the required manual master cylinder ratio, brake light switch may require modification to work properly based off of pedal position.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: We recommend a 6-7:1 pedal ratio on all manual brake systems \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0043\/6807\/2822\/files\/tbmPEDALratioillustrationcopy_1024x1024.jpg?v=1686849258\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWatch this video to understand the proper pedal ratio and master cylinder size for your vehicle\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/dIqaOo83rGQ\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDo's and Don'ts for proper master cylinder setup: Must Watch! \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/jmRFvgXjpzc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"TBM Brakes","offers":[{"title":"Default Title","offer_id":45182565679157,"sku":"20-160","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/20-10014-2.jpg?v=1777400475"},{"product_id":"1982-92-f-body-dzus-rails-rivet-on-black-anodized","title":"Motion Raceworks 1982-92 Third Gen Camaro F-Body Dzus Hood Rails (51\") (Black Anodized)","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMotion Raceworks 1982-92 Third Gen Camaro F-Body Dzus Hood Rails (Black Anodized)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cem\u003eOverall\u003c\/em\u003e\u003cem\u003e length of dzus rails is 51\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eOur Motion Raceworks Dzus Hood Rails make installing a non bolt on composite hood as easy as it gets on any 1982-92 Third Gen F-Body Camaro. Made from \u003cspan\u003eCNC laser cut and formed \u003c\/span\u003elightweight 5052 aluminum they are intended to rivet on to the inner fender flange on a stock or aftermarket fender. Standard with slotted holes separate of the rivet holes, this allows for easy adjustment up and down for precise fitment of your hood height. Then simply rivet all of the remaining rivet points down to the fender.\u003c\/p\u003e\n\u003cp\u003ePlease specify hood thickness in the drop downs prior to ordering to receive the correct dzus fastener package for your hood.\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eParts Included:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Black Anodized Hood Rails\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(10) 7\/16\" Dzus Fasteners (.550 Length)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(10) Springs \u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e(40) Rivets\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cem\u003eNote: Hoods do not have to be exact as you can adjust spring slightly larger or smaller to accommodate.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eLearn how to install these Dzus Fasteners with our sure fire technique for a perfect Install!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/oCHA6Ajj0XY\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eHelpful Tips about Proper Dzus Installation \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/YQrcq6Rt_gg\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Bare Aluminum (30-DZUS10) \/ .083 (Most Carbon) (30-S083-10)","offer_id":45182593105973,"sku":"30-10001-F1","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (30-DZUS10) \/ .125 (Most Thin Fiberglass) (30-S125-10)","offer_id":45182593138741,"sku":"30-10001-F2","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (30-DZUS10) \/ .187 (Most Thick Fiberglass) (30-S187-10)","offer_id":45182593171509,"sku":"30-10001-F3","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized (30-DZUS10BLK) \/ .083 (Most Carbon) (30-S083-10)","offer_id":45182593204277,"sku":"30-10001-F4","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized (30-DZUS10BLK) \/ .125 (Most Thin Fiberglass) (30-S125-10)","offer_id":45182593237045,"sku":"30-10001-F5","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized (30-DZUS10BLK) \/ .187 (Most Thick Fiberglass) (30-S187-10)","offer_id":45182593269813,"sku":"30-10001-F6","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/DSC_4671.jpg?v=1777400789"},{"product_id":"1982-2002-camaro-firebird-fbody-chromoly-lightweight-steering-column-race-only","title":"1982-2002 Camaro\/Firebird F-Body Chromoly Lightweight Steering Column","description":"\u003cp\u003e\u003cstrong\u003e1982-2002 Camaro\/Firebird F-Body Chromoly Lightweight Steering Column Race Only 15-110\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMotion Raceworks F-Body Camaro, Firebird, and Trans-Am Lightweight Chromoly Steering Column is the answer for your race car light weight needs. This column utilizes American made and SFI parts to create a very safe and high quality column. \u003c\/p\u003e\n\u003cp\u003eThis column is professionally tig welded using Chromoly material for weight reduction.  Bolting to factory mounts, installation is also a breeze. Incorporated in the design is a 1\/8\" firewall plate to add safety in fire protection and sealing from the engine bay in the result of an oil or fuel fire. All columns come powder-coated Gloss Black.\u003cbr\u003e\u003cbr\u003eOur steering column utilizes a split collar locking design to secure the shaft from the bottom, along with a welded washer on top. This creates a safe option as opposed to press fit bearing options on the market that can heat up or work themselves loose, leaving drivers with a potentially dangerous situation. \u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis column comes standard with a Motion Raceworks 5\/6 bolt SFI approved quick release installed and welded.  \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdd a Grant or MPI steering wheel and one of our very popular steering wheel buttons. All hardware included. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou can also choose to add an adaptor U-joint. This will allow you to the connect column to a 3\/4 DD steering shaft as used in many stock and aftermarket steering rack kits (I.E. Flaming River).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease call to check for lead times\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eLearn more about U-Joints and Intermediate Steering Shafts by watching this video below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/A0mbVBebJvo\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"No Steering Wheel \/ No U-Joint","offer_id":45182641635381,"sku":"15-110-1","price":349.99,"currency_code":"USD","in_stock":true},{"title":"No Steering Wheel \/ Add 3\/4 Round to 3\/4 DD U-Joint (15-50001)","offer_id":45182641668149,"sku":"15-110-2","price":444.99,"currency_code":"USD","in_stock":true},{"title":"Add MPI Steering Wheel w\/ Orange Stripe MPI-DRG-R513-MRW \/ No U-Joint","offer_id":45182641700917,"sku":"15-110-13","price":514.99,"currency_code":"USD","in_stock":true},{"title":"Add MPI Steering Wheel w\/ Orange Stripe MPI-DRG-R513-MRW \/ Add 3\/4 Round to 3\/4 DD U-Joint (15-50001)","offer_id":45182641733685,"sku":"15-110-14","price":594.99,"currency_code":"USD","in_stock":true},{"title":"Add MPI Steering Wheel - All Black MPI-DRG-R513-BLK-MRW \/ No U-Joint","offer_id":45182641766453,"sku":"15-110-25","price":514.99,"currency_code":"USD","in_stock":true},{"title":"Add MPI Steering Wheel - All Black MPI-DRG-R513-BLK-MRW \/ Add 3\/4 Round to 3\/4 DD U-Joint (15-50001)","offer_id":45182641799221,"sku":"15-110-26","price":594.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/IMG_0369.jpg?v=1777401304"},{"product_id":"1982-92-third-gen-fbody-parachute-mount-camaro-firebird-trans-am","title":"1982-92 3rd Gen Camaro\/Firebird\/Trans Am Bolt On Parachute Mount 14-110","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1982-92 3rd Gen Camaro\/Trans Am Parachute Mount 14-110\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMotion Raceworks 1982-92 3rd Gen Camaro\/Trans Am Parachute Mount is a bolt on NHRA \u0026amp; IHRA track legal option to stop your vehicle safely, but look good while doing it. Made in the USA, we fully TIG weld a combo of DOM Chromoly Tubing and CNC Laser Formed Brackets for a strong but lightweight design. From there the mount is inspected and prepped for its standard gloss black powder coat finish to become the highest quality piece on the market!\u003cbr\u003e\u003cbr\u003eThe Frame Cross Bar is designed to bolt on to your factory frame mounts replacing the factory crash bar\/bumper support. With a cross bolt receiver design this allows for easy installation and with removal of one bolt, the Parachute Receiver Mount comes out. Then the hole can be quickly hidden with a license plate for street driving, trailering, or storage when not at the track.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eParts Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrame Cross Bar Mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eParachute Receiver Mount\u003c\/li\u003e\n\u003cli\u003eAll Necessary Grade 8 Hardware (some kits reuse factory hardware)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe also highly suggest picking up our Parachute Essentials Kit when ordering. This gives you a billet end cap for your cable to avoid snags that would prevent the parachute from deploying as well as a cable holder and Remove Before Flight Flag\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.motionraceworks.com\/products\/motion-raceworks-parachute-essentials\" title=\"Remove Before Flight\" target=\"_blank\"\u003e\u003cspan\u003ehttps:\/\/www.motionraceworks.com\/products\/motion-raceworks-parachute-essentials\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you are interested in some optional parts with the parachute mount, please check out the links below for info or purchasing. Refer to the picture chart above for parachute sizing and specifications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOptional Parts:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Billet Cable Handle Release Kit\" href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-levers-mounts\/products\/billet-parachute-release-lever-cable-mount-kit\" target=\"_blank\"\u003eBillet Handle \u0026amp; Cable Release Kit\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Stroud 420 Comp Eliminator Pilot Spring Parachute\" href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-systems\/products\/stroud-420-comp-eliminator-parachute\" target=\"_blank\"\u003eStroud 420 Comp Eliminator Pilot Spring Parachute\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Stroud 430 Pro Stock Pilot Spring Parachute\" href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-systems\/products\/stroud-430-pro-stock-parachute\" target=\"_blank\"\u003eStroud 430 Pro Stock Pilot Spring Parachute\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"Parachute Cable Holder\" href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-kits\/products\/motion-raceworks-parachute-cable-holder\" target=\"_blank\"\u003eParachute Cable Holder\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca title=\"Parachute Cable Holder\" href=\"https:\/\/www.motionraceworks.com\/collections\/parachute-kits\/products\/motion-raceworks-parachute-cable-holder\" target=\"_blank\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstall Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo install, simply remove bumper cover, remove bumper support by unbolting on each side. Bolt the main bar where the old support was. Temporarily remount bumper cover, trace where the receiver will go through from the back side of the bumper cover, drill your hole. Slide the insert mount back in, tighten bolts and you are done.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWatch this video to learn how to cut the perfect hole through your bumper when mounting your parachute mount.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ZbkN55UqKgU\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWatch these videos and learn how to pack your Stroud Safety Parachute!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cstrong\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Zlk3REH88oM\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/WqB7MwwGPl8\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWant to learn how to adjust the length of your parachute cable? Click here! \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/7dhOMmwD3ZM\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e \u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003eNOTE: With hardware fully tightened, w\u003c\/em\u003e\u003cem\u003ee always recommend welding the \u003c\/em\u003e\u003cem\u003eparachute mount to the vehicle for added strength and security as not to rely on only the\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e\u003cem\u003ehardwa\u003c\/em\u003e\u003cem\u003ere.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cem\u003e***For off-road racing use only*** \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Motion Raceworks","offers":[{"title":"No Wing \/ No \/ No","offer_id":45182643961909,"sku":"14-110","price":389.99,"currency_code":"USD","in_stock":true},{"title":"No Wing \/ No \/ Add Stroud 420 Black Parachute (420-01)","offer_id":45182643994677,"sku":"14-110-2","price":918.99,"currency_code":"USD","in_stock":true},{"title":"No Wing \/ No \/ Add Stroud 430 Black Parachute (430-01-05)","offer_id":45182644027445,"sku":"14-110-4","price":938.99,"currency_code":"USD","in_stock":true},{"title":"No Wing \/ Add Billet Cable Handle Kit (14-020) \/ No","offer_id":45182644060213,"sku":"14-110-6","price":548.99,"currency_code":"USD","in_stock":true},{"title":"No Wing \/ Add Billet Cable Handle Kit (14-020) \/ Add Stroud 420 Black Parachute (420-01)","offer_id":45182644092981,"sku":"14-110-8","price":1079.99,"currency_code":"USD","in_stock":true},{"title":"No Wing \/ Add Billet Cable Handle Kit (14-020) \/ Add Stroud 430 Black Parachute (430-01-05)","offer_id":45182644125749,"sku":"14-110-10","price":1098.99,"currency_code":"USD","in_stock":true},{"title":"Wing Length (Sticks Further Away From Rear Of Car) \/ No \/ No","offer_id":45182644158517,"sku":"14-112","price":389.99,"currency_code":"USD","in_stock":true},{"title":"Wing Length (Sticks Further Away From Rear Of Car) \/ No \/ Add Stroud 420 Black Parachute (420-01)","offer_id":45182644191285,"sku":"14-112-2","price":918.99,"currency_code":"USD","in_stock":true},{"title":"Wing Length (Sticks Further Away From Rear Of Car) \/ No \/ Add Stroud 430 Black Parachute (430-01-05)","offer_id":45182644224053,"sku":"14-112-4","price":938.99,"currency_code":"USD","in_stock":true},{"title":"Wing Length (Sticks Further Away From Rear Of Car) \/ Add Billet Cable Handle Kit (14-020) \/ No","offer_id":45182644256821,"sku":"14-112-6","price":548.99,"currency_code":"USD","in_stock":true},{"title":"Wing Length (Sticks Further Away From Rear Of Car) \/ Add Billet Cable Handle Kit (14-020) \/ Add Stroud 420 Black Parachute (420-01)","offer_id":45182644289589,"sku":"14-112-8","price":1079.99,"currency_code":"USD","in_stock":true},{"title":"Wing Length (Sticks Further Away From Rear Of Car) \/ Add Billet Cable Handle Kit (14-020) \/ Add Stroud 430 Black Parachute (430-01-05)","offer_id":45182644322357,"sku":"14-112-10","price":1098.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/parachute-kits-1982-92-3rd-f-body-parachute-mount-camaro-firebird-trans-am-1-Photoroom.jpg?v=1777401323"},{"product_id":"motion-raceworks-billet-turn-signal-switch","title":"Motion Raceworks Billet Aftermarket Turn Signal Switch 15-140","description":"\u003cp\u003e\u003cstrong\u003eMotion Raceworks Billet Turn Signal Switch with 3-Wire Hookup 15-140\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e\u003cstrong\u003eFor Use With Aftermarket Steering Columns\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis Turn Signal Switch will work with any aftermarket race style steering column that is 1.125, 1.25 or 1.5\" OD tubing.  Motion Raceworks race columns use the standard 1.25\" version of this turn signal switch.  \u003c\/p\u003e\n\u003cp\u003eThis blinker switch is a 3 wire (left, right, power). The switch has a positive up and down as well as center. Kit comes complete and ready to bolt on to column with billet handle. Choose bare or black anodized in options below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Note: switch still requires an external flasher on the power in lug*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*This switch does not solve all rear tail light wiring, will still require a factory body harness and or an aftermarket brake, running, blinker conversion box.*\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motion Raceworks","offers":[{"title":"Black Anodized \/ 1.25\" (Motion Raceworks Column Size) (15-02003)","offer_id":45182659428405,"sku":"15-140BLK-1","price":149.99,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 1.125\" (15-02002)","offer_id":45182659461173,"sku":"15-140BLK-2","price":149.99,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \/ 1.50\" (15-02004)","offer_id":45182659493941,"sku":"15-140BLK-3","price":149.99,"currency_code":"USD","in_stock":true},{"title":"Bare \/ 1.25\" (Motion Raceworks Column Size) (15-02003)","offer_id":45182659526709,"sku":"15-140-1","price":139.99,"currency_code":"USD","in_stock":true},{"title":"Bare \/ 1.125\" (15-02002)","offer_id":45182659559477,"sku":"15-140-2","price":139.99,"currency_code":"USD","in_stock":true},{"title":"Bare \/ 1.50\" (15-02004)","offer_id":45182659592245,"sku":"15-140-3","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/7198\/0853\/files\/turn_0001_Layer0.jpg?v=1777401523"}],"url":"https:\/\/shoplegacymotorsports.com\/collections\/1982-1992-3rd-gen-camaro.oembed","provider":"ShopLegacyMotorsports","version":"1.0","type":"link"}